| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YjCVesysvfpKNilD@smile.fi.intel.com>
Date: Tue, 15 Mar 2022 15:32:42 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Javier Martinez Canillas <javierm@...hat.com>,
Noralf Trønnes <noralf@...nnes.org>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/5] drm/format-helper: Rename
drm_fb_xrgb8888_to_mono_reversed()
On Tue, Mar 15, 2022 at 12:07:03PM +0100, Geert Uytterhoeven wrote:
> There is no "reversed" handling in drm_fb_xrgb8888_to_mono_reversed():
> the function just converts from color to grayscale, and reduces the
> number of grayscale levels from 256 to 2 (i.e. brightness 0-127 is
> mapped to 0, 128-255 to 1). All "reversed" handling is done in the
> repaper driver, where this function originated.
>
> Hence make this clear by renaming drm_fb_xrgb8888_to_mono_reversed() to
> drm_fb_xrgb8888_to_mono(), and documenting the black/white pixel
> mapping.
W/ or w/o the below remark being addressed
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
> Signed-off-by: Geert Uytterhoeven <geert@...ux-m68k.org>
> ---
> drivers/gpu/drm/drm_format_helper.c | 32 ++++++++++++++---------------
> drivers/gpu/drm/solomon/ssd130x.c | 2 +-
> drivers/gpu/drm/tiny/repaper.c | 2 +-
> include/drm/drm_format_helper.h | 5 ++---
> 4 files changed, 20 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
> index bc0f49773868a9b0..b68aa857c6514529 100644
> --- a/drivers/gpu/drm/drm_format_helper.c
> +++ b/drivers/gpu/drm/drm_format_helper.c
> @@ -594,8 +594,8 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for
> }
> EXPORT_SYMBOL(drm_fb_blit_toio);
>
> -static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned int pixels,
> - unsigned int start_offset, unsigned int end_len)
> +static void drm_fb_gray8_to_mono_line(u8 *dst, const u8 *src, unsigned int pixels,
> + unsigned int start_offset, unsigned int end_len)
> {
> unsigned int xb, i;
>
> @@ -621,8 +621,8 @@ static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned
> }
>
> /**
> - * drm_fb_xrgb8888_to_mono_reversed - Convert XRGB8888 to reversed monochrome
> - * @dst: reversed monochrome destination buffer
> + * drm_fb_xrgb8888_to_mono - Convert XRGB8888 to monochrome
> + * @dst: monochrome destination buffer (0=black, 1=white)
> * @dst_pitch: Number of bytes between two consecutive scanlines within dst
> * @src: XRGB8888 source buffer
> * @fb: DRM framebuffer
> @@ -633,10 +633,10 @@ static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned
> * and use this function to convert to the native format.
> *
> * This function uses drm_fb_xrgb8888_to_gray8() to convert to grayscale and
> - * then the result is converted from grayscale to reversed monohrome.
> + * then the result is converted from grayscale to monochrome.
> */
> -void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *vaddr,
> - const struct drm_framebuffer *fb, const struct drm_rect *clip)
> +void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *vaddr,
> + const struct drm_framebuffer *fb, const struct drm_rect *clip)
> {
> unsigned int linepixels = drm_rect_width(clip);
> unsigned int lines = clip->y2 - clip->y1;
> @@ -652,8 +652,8 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
> return;
>
> /*
> - * The reversed mono destination buffer contains 1 bit per pixel
> - * and destination scanlines have to be in multiple of 8 pixels.
> + * The mono destination buffer contains 1 bit per pixel and
> + * destination scanlines have to be in multiple of 8 pixels.
> */
> if (!dst_pitch)
> dst_pitch = DIV_ROUND_UP(linepixels, 8);
> @@ -664,9 +664,9 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
> * The cma memory is write-combined so reads are uncached.
> * Speed up by fetching one line at a time.
> *
> - * Also, format conversion from XR24 to reversed monochrome
> - * are done line-by-line but are converted to 8-bit grayscale
> - * as an intermediate step.
> + * Also, format conversion from XR24 to monochrome are done
> + * line-by-line but are converted to 8-bit grayscale as an
> + * intermediate step.
> *
> * Allocate a buffer to be used for both copying from the cma
> * memory and to store the intermediate grayscale line pixels.
> @@ -683,7 +683,7 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
> * are not aligned to multiple of 8.
> *
> * Calculate if the start and end pixels are not aligned and set the
> - * offsets for the reversed mono line conversion function to adjust.
> + * offsets for the mono line conversion function to adjust.
> */
> start_offset = clip->x1 % 8;
> end_len = clip->x2 % 8;
> @@ -692,12 +692,12 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
> for (y = 0; y < lines; y++) {
> src32 = memcpy(src32, vaddr, len_src32);
> drm_fb_xrgb8888_to_gray8_line(gray8, src32, linepixels);
> - drm_fb_gray8_to_mono_reversed_line(mono, gray8, dst_pitch,
> - start_offset, end_len);
> + drm_fb_gray8_to_mono_line(mono, gray8, dst_pitch, start_offset,
> + end_len);
Can be one line now (definition is already quite behind 80 limit).
> vaddr += fb->pitches[0];
> mono += dst_pitch;
> }
>
> kfree(src32);
> }
> -EXPORT_SYMBOL(drm_fb_xrgb8888_to_mono_reversed);
> +EXPORT_SYMBOL(drm_fb_xrgb8888_to_mono);
> diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
> index d08d86ef07bcbe7f..caee851efd5726e7 100644
> --- a/drivers/gpu/drm/solomon/ssd130x.c
> +++ b/drivers/gpu/drm/solomon/ssd130x.c
> @@ -458,7 +458,7 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
> if (!buf)
> return -ENOMEM;
>
> - drm_fb_xrgb8888_to_mono_reversed(buf, 0, vmap, fb, rect);
> + drm_fb_xrgb8888_to_mono(buf, 0, vmap, fb, rect);
>
> ssd130x_update_rect(ssd130x, buf, rect);
>
> diff --git a/drivers/gpu/drm/tiny/repaper.c b/drivers/gpu/drm/tiny/repaper.c
> index 37b6bb90e46e1fe8..a096fb8b83e99dc8 100644
> --- a/drivers/gpu/drm/tiny/repaper.c
> +++ b/drivers/gpu/drm/tiny/repaper.c
> @@ -540,7 +540,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb)
> if (ret)
> goto out_free;
>
> - drm_fb_xrgb8888_to_mono_reversed(buf, 0, cma_obj->vaddr, fb, &clip);
> + drm_fb_xrgb8888_to_mono(buf, 0, cma_obj->vaddr, fb, &clip);
>
> drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
>
> diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
> index 0b0937c0b2f6324e..55145eca07828321 100644
> --- a/include/drm/drm_format_helper.h
> +++ b/include/drm/drm_format_helper.h
> @@ -43,8 +43,7 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for
> const void *vmap, const struct drm_framebuffer *fb,
> const struct drm_rect *rect);
>
> -void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *src,
> - const struct drm_framebuffer *fb,
> - const struct drm_rect *clip);
> +void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *src,
> + const struct drm_framebuffer *fb, const struct drm_rect *clip);
>
> #endif /* __LINUX_DRM_FORMAT_HELPER_H */
> --
> 2.25.1
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists