[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220317190109.3742-3-leoyang.li@nxp.com>
Date: Thu, 17 Mar 2022 14:01:06 -0500
From: Li Yang <leoyang.li@....com>
To: Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 3/6] arm64: dts: ls2080a-rdb: add phy nodes
Define PHY nodes on the board.
Signed-off-by: Li Yang <leoyang.li@....com>
---
.../boot/dts/freescale/fsl-ls2080a-rdb.dts | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 44894356059c..1c8c99a74071 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -23,3 +23,71 @@ chosen {
stdout-path = "serial1:115200n8";
};
};
+
+&dpmac5 {
+ phy-handle = <&mdio2_phy1>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+ phy-handle = <&mdio2_phy2>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+ phy-handle = <&mdio2_phy3>;
+ phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+ phy-handle = <&mdio2_phy4>;
+ phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+ status = "disabled";
+
+ /* CS4340 PHYs */
+ mdio1_phy1: emdio1_phy@1 {
+ reg = <0x10>;
+ };
+
+ mdio1_phy2: emdio1_phy@2 {
+ reg = <0x11>;
+ };
+
+ mdio1_phy3: emdio1_phy@3 {
+ reg = <0x12>;
+ };
+
+ mdio1_phy4: emdio1_phy@4 {
+ reg = <0x13>;
+ };
+};
+
+&emdio2 {
+ /* AQR405 PHYs */
+ mdio2_phy1: emdio2_phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 1 0x4>; /* Level high type */
+ reg = <0x0>;
+ };
+
+ mdio2_phy2: emdio2_phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 2 0x4>; /* Level high type */
+ reg = <0x1>;
+ };
+
+ mdio2_phy3: emdio2_phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 4 0x4>; /* Level high type */
+ reg = <0x2>;
+ };
+
+ mdio2_phy4: emdio2_phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 5 0x4>; /* Level high type */
+ reg = <0x3>;
+ };
+};
--
2.25.1
Powered by blists - more mailing lists