linux-kernel - [PATCH 5/6] arm64: dts: qcom: sm6350: Add UFS nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220318183004.858707-6-luca.weiss@fairphone.com>
Date:   Fri, 18 Mar 2022 19:30:03 +0100
From:   Luca Weiss <luca.weiss@...rphone.com>
To:     linux-arm-msm@...r.kernel.org
Cc:     ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
        Luca Weiss <luca.weiss@...rphone.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 5/6] arm64: dts: qcom: sm6350: Add UFS nodes

Add the necessary nodes for UFS and its PHY.

Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 79 ++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d7c9edff19f7..c5c93b6bcd2a 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -541,6 +541,85 @@ uart2: serial@...000 {
 			};
 		};
 
+		ufs_mem_hc: ufshc@...4000 {
+			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"core_clk_ice",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
+				<&rpmhcc RPMH_QLINK_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@...7000 {
+			compatible = "qcom,sm6350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@...7400 {
+				reg = <0 0x01d87400 0 0x128>,
+				      <0 0x01d87600 0 0x1fc>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x128>,
+				      <0 0x01d87a00 0 0x1fc>;
+				#phy-cells = <0>;
+			};
+		};
+
 		tcsr_mutex: hwlock@...0000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
-- 
2.35.1