| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220319174645.340379-12-konrad.dybcio@somainline.org>
Date: Sat, 19 Mar 2022 18:46:41 +0100
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: ~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 11/15] arm64: dts: qcom: msm8994-kitakami: Update regulator configuration
Remove regulator-always-on property where not necessary and mark regulators
that are not supposed to be voted active on boot with regulator-boot-on.
While at it, reorder the load properties to make it look more decent.
Reorder PMICs to fix a probe defer caused by messy dependencies and Linux's
inability to handle them (at least for now).
Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
---
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 82 ++++++++++---------
1 file changed, 44 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 5e93ab0a649b..e5a45af0bd12 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -187,26 +187,38 @@ vdd_gfx: s2@...0 {
};
&rpm_requests {
+ /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+
pm8994_regulators: pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
- vdd_s8-supply = <&vph_pwr>;
- vdd_s9-supply = <&vph_pwr>;
- vdd_s10-supply = <&vph_pwr>;
- vdd_s11-supply = <&vph_pwr>;
- vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&pmi8994_s1>;
vdd_l2_l26_l28-supply = <&pm8994_s3>;
vdd_l3_l11-supply = <&pm8994_s3>;
vdd_l4_l27_l31-supply = <&pm8994_s3>;
- vdd_l5_l7-supply = <&pm8994_s5>;
vdd_l6_l12_l32-supply = <&pm8994_s5>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
@@ -227,9 +239,9 @@ pm8994_s3: s3 {
pm8994_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-system-load = <325000>;
regulator-allow-set-load;
regulator-always-on;
- regulator-system-load = <325000>;
};
pm8994_s5: s5 {
@@ -255,13 +267,14 @@ pm8994_l1: l1 {
pm8994_l2: l2 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l3: l3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
};
pm8994_l4: l4 {
@@ -301,8 +314,8 @@ pm8994_l11: l11 {
pm8994_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l13: l13 {
@@ -313,8 +326,9 @@ pm8994_l13: l13 {
pm8994_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
};
pm8994_l15: l15 {
@@ -330,44 +344,47 @@ pm8994_l16: l16 {
pm8994_l17: l17 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
+ regulator-boot-on;
};
pm8994_l18: l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
+ regulator-boot-on;
};
pm8994_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
+ regulator-boot-on;
};
pm8994_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-allow-set-load;
regulator-system-load = <570000>;
+ regulator-allow-set-load;
};
pm8994_l21: l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-allow-set-load;
regulator-system-load = <800000>;
+ regulator-allow-set-load;
};
pm8994_l22: l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
};
pm8994_l23: l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
pm8994_l24: l24 {
@@ -378,6 +395,7 @@ pm8994_l24: l24 {
pm8994_l25: l25 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
};
pm8994_l26: l26 {
@@ -388,30 +406,33 @@ pm8994_l26: l26 {
pm8994_l27: l27 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
};
pm8994_l28: l28 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l29: l29 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
+ regulator-boot-on;
};
pm8994_l30: l30 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
};
pm8994_l31: l31 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l32: l32 {
@@ -419,26 +440,11 @@ pm8994_l32: l32 {
regulator-max-microvolt = <1800000>;
};
- pm8994_lvs1: lvs1 {};
- pm8994_lvs2: lvs2 {};
- };
-
- pmi8994_regulators: pmi8994-regulators {
- compatible = "qcom,rpm-pmi8994-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_bst_byp-supply = <&vph_pwr>;
-
- pmi8994_s1: s1 {
- regulator-min-microvolt = <1025000>;
- regulator-max-microvolt = <1025000>;
+ pm8994_lvs1: lvs1 {
+ regulator-boot-on;
};
-
- /* S2 & S3 - VDD_GFX */
-
- pmi8994_bby: boost-bypass {
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3600000>;
+ pm8994_lvs2: lvs2 {
+ regulator-boot-on;
};
};
};
--
2.35.1
Powered by blists - more mailing lists