| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220321212431.13717-2-pmenzel@molgen.mpg.de>
Date: Mon, 21 Mar 2022 22:24:32 +0100
From: Paul Menzel <pmenzel@...gen.mpg.de>
To: Damien Le Moal <damien.lemoal@...nsource.wdc.com>
Cc: Paul Menzel <pmenzel@...gen.mpg.de>,
Hans de Goede <hdegoede@...hat.com>,
Mario Limonciello <mario.limonciello@....com>,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/3] ata: ahci: Skip 200 ms debounce delay for AMD FCH SATA Controller
AMD chipsets for AMD Ryzen contain two SATA controllers, for example on the
MSI MS-7A37/B350M MORTAR (MS-7A37):
12:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller [1022:43b7] (rev 02)
27:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 61)
The FCH SATA Controller [0x1022:0x7901] does not need the 200 ms delay
before debouncing the PHY in `sata_link_resume()`, so skip it by mapping it
to the board with no debounce delay.
Tested on the MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.MW 11/01/2021 with
Linux 5.17-rc2.
Currently, without this patch (with 200 ms delay), device probe for ata9
takes 320 ms (= 0.526 s - 0.206 s):
[ 0.193682] ahci 0000:12:00.1: version 3.0
[ 0.193797] ahci 0000:12:00.1: SSS flag set, parallel bus scan disabled
[ 0.193847] ahci 0000:12:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.193850] ahci 0000:12:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.194429] scsi host0: ahci
[ 0.194584] scsi host1: ahci
[ 0.194718] scsi host2: ahci
[ 0.194848] scsi host3: ahci
[ 0.194942] scsi host4: ahci
[ 0.195009] scsi host5: ahci
[ 0.195091] scsi host6: ahci
[ 0.195150] scsi host7: ahci
[ 0.195177] ata1: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80100 irq 35
[ 0.195180] ata2: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80180 irq 35
[ 0.195181] ata3: DUMMY
[ 0.195181] ata4: DUMMY
[ 0.195183] ata5: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80300 irq 35
[ 0.195184] ata6: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80380 irq 35
[ 0.195185] ata7: DUMMY
[ 0.195186] ata8: DUMMY
[ 0.206256] ahci 0000:27:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.206260] ahci 0000:27:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.206450] scsi host8: ahci
[ 0.206490] ata9: SATA max UDMA/133 abar m2048@...cf00000 port 0xfcf00100 irq 37
[…]
[ 0.508879] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.525832] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.526199] ata9.00: supports DRM functions and may not be fully accessible (TPM)
[ 0.526200] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
[ 0.526262] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.527510] ata9.00: Features: Trust Dev-Sleep
[ 0.527678] ata9.00: supports DRM functions and may not be fully accessible (TPM)
[ 0.528866] ata9.00: configured for UDMA/133
[ 0.822402] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.133517] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.445124] ata6: SATA link down (SStatus 0 SControl 300)
With this patch (no delay) device probe for ata9 takes 117 ms
(= 0.323 s - 0.206 s):
[ 0.193600] ahci 0000:12:00.1: version 3.0
[ 0.193718] ahci 0000:12:00.1: SSS flag set, parallel bus scan disabled
[ 0.193768] ahci 0000:12:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.193770] ahci 0000:12:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.194328] scsi host0: ahci
[ 0.194477] scsi host1: ahci
[ 0.194611] scsi host2: ahci
[ 0.194739] scsi host3: ahci
[ 0.194824] scsi host4: ahci
[ 0.194903] scsi host5: ahci
[ 0.194978] scsi host6: ahci
[ 0.195042] scsi host7: ahci
[ 0.195068] ata1: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80100 irq 35
[ 0.195070] ata2: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80180 irq 35
[ 0.195071] ata3: DUMMY
[ 0.195072] ata4: DUMMY
[ 0.195073] ata5: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80300 irq 35
[ 0.195075] ata6: SATA max UDMA/133 abar m131072@...ce80000 port 0xfce80380 irq 35
[ 0.195076] ata7: DUMMY
[ 0.195077] ata8: DUMMY
[ 0.206113] ahci 0000:27:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.206117] ahci 0000:27:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.206306] scsi host8: ahci
[ 0.206346] ata9: SATA max UDMA/133 abar m2048@...cf00000 port 0xfcf00100 irq 37
[…]
[ 0.323002] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.323142] ata9.00: supports DRM functions and may not be fully accessible (TPM)
[ 0.323145] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
[ 0.323205] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.324470] ata9.00: Features: Trust Dev-Sleep
[ 0.324657] ata9.00: supports DRM functions and may not be fully accessible (TPM)
[ 0.325886] ata9.00: configured for UDMA/133
[ 0.508257] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.820604] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.132695] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.445037] ata6: SATA link down (SStatus 0 SControl 300)
Tested on the Dell OptiPlex 5055 Ryzen CPU/0P03DX, BIOS 1.1.50 07/28/2021
with Linux 5.17 and nothing connected to the port.
Currently, without this patch (with 200 ms delay), device probe for ata9
takes 306 ms (= 0.734 s - 0.428 s):
[ 0.427489] ahci 0000:07:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.427495] ahci 0000:07:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.427623] scsi host8: ahci
[ 0.427650] ata9: SATA max UDMA/133 abar m4096@...0108000 port 0xf0108100 irq 38
[…]
[ 0.734155] ata9: SATA link down (SStatus 0 SControl 300)
With this patch (no delay) device probe for ata9 takes 103 ms
(= 0.532 s - 0.429 s):
[ 0.428481] ahci 0000:07:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.428486] ahci 0000:07:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.428611] scsi host8: ahci
[ 0.428639] ata9: SATA max UDMA/133 abar m4096@...0108000 port 0xf0108100 irq 38
[…]
[ 0.531949] ata9: SATA link down (SStatus 0 SControl 300)
Signed-off-by: Paul Menzel <pmenzel@...gen.mpg.de>
Cc: Hans de Goede <hdegoede@...hat.com>
Cc: Mario Limonciello <mario.limonciello@....com>
---
v2: Add test details and data
drivers/ata/ahci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 0fc09b86a5590..44b79fe43d13d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -456,7 +456,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
{ PCI_VDEVICE(AMD, 0x7801), board_ahci_no_debounce_delay }, /* AMD Hudson-2 (AHCI mode) */
{ PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
- { PCI_VDEVICE(AMD, 0x7901), board_ahci_low_power }, /* AMD Green Sardine */
+ { PCI_VDEVICE(AMD, 0x7901), board_ahci_low_power_no_debounce_delay }, /* AMD Green Sardine */
/* AMD is using RAID class only for ahci controllers */
{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
--
2.30.2
Powered by blists - more mailing lists