| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0bdbe6ad8f39996df6345bb249e4a2e8@walle.cc>
Date: Mon, 21 Mar 2022 23:56:33 +0100
From: Michael Walle <michael@...le.cc>
To: Tudor Ambarus <tudor.ambarus@...rochip.com>
Cc: p.yadav@...com, miquel.raynal@...tlin.com, richard@....at,
vigneshr@...com, linux-mtd@...ts.infradead.org,
linux-kernel@...r.kernel.org, nicolas.ferre@...rochip.com
Subject: Re: [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op
Am 2022-02-28 12:17, schrieb Tudor Ambarus:
> RDID is used in the core to auto detect the flash, but also by some
> manufacturer drivers that contain flashes that support Octal DTR mode,
> so that they can read the flash ID after the switch to Octal DTR was
> made
> to test if the switch was successful. Introduce a core method for RDID
> op
> to avoid code duplication.
Some or all? Is that specific to the flash or can we just check that
readid works in spi_nor_octal_dtr_enable()? That way we could also
just get rid of the proto parameter for the read_id because it can
be called after we set the reg_proto.
-michael
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
> ---
> drivers/mtd/spi-nor/core.c | 58 ++++++++++++++++++++++++++------------
> drivers/mtd/spi-nor/core.h | 9 ++++++
> 2 files changed, 49 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index b1d6fa65417d..281e3d25f74c 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -369,6 +369,41 @@ int spi_nor_write_disable(struct spi_nor *nor)
> return ret;
> }
>
> +/**
> + * spi_nor_read_id() - Read the JEDEC ID.
> + * @nor: pointer to 'struct spi_nor'.
> + * @naddr: number of address bytes to send. Can be zero if the
> operation
> + * does not need to send an address.
> + * @ndummy: number of dummy bytes to send after an opcode or address.
> Can
> + * be zero if the operation does not require dummy bytes.
> + * @id: pointer to a DMA-able buffer where the value of the JEDEC ID
> + * will be written.
> + * @reg_proto: the SPI protocol for register operation.
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id,
> + enum spi_nor_protocol reg_proto)
> +{
> + int ret;
> +
> + if (nor->spimem) {
> + struct spi_mem_op op =
> + SPI_NOR_READID_OP(naddr, ndummy, id, SPI_NOR_MAX_ID_LEN);
> +
> + spi_nor_spimem_setup_op(nor, &op, reg_proto);
> + ret = spi_mem_exec_op(nor->spimem, &op);
> + } else {
> + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
> + SPI_NOR_MAX_ID_LEN);
> + }
> +
> + if (ret)
> + dev_dbg(nor->dev, "error %d reading JEDEC ID\n", ret);
> +
> + return ret;
> +}
> +
> /**
> * spi_nor_read_sr() - Read the Status Register.
> * @nor: pointer to 'struct spi_nor'.
> @@ -1649,28 +1684,15 @@ static const struct flash_info
> *spi_nor_match_id(struct spi_nor *nor,
> return NULL;
> }
>
> -static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
> +static const struct flash_info *spi_nor_detect(struct spi_nor *nor)
> {
> const struct flash_info *info;
> u8 *id = nor->bouncebuf;
> int ret;
>
> - if (nor->spimem) {
> - struct spi_mem_op op =
> - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
> - SPI_MEM_OP_NO_ADDR,
> - SPI_MEM_OP_NO_DUMMY,
> - SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1));
> -
> - ret = spi_mem_exec_op(nor->spimem, &op);
> - } else {
> - ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
> - SPI_NOR_MAX_ID_LEN);
> - }
> - if (ret) {
> - dev_dbg(nor->dev, "error %d reading JEDEC ID\n", ret);
> + ret = spi_nor_read_id(nor, 0, 0, id, nor->reg_proto);
> + if (ret)
> return ERR_PTR(ret);
> - }
>
> info = spi_nor_match_id(nor, id);
> if (!info) {
> @@ -2900,7 +2922,7 @@ static const struct flash_info
> *spi_nor_get_flash_info(struct spi_nor *nor,
> info = spi_nor_match_name(nor, name);
> /* Try to auto-detect if chip name wasn't specified or not found */
> if (!info) {
> - detected_info = spi_nor_read_id(nor);
> + detected_info = spi_nor_detect(nor);
> info = detected_info;
> }
> if (IS_ERR_OR_NULL(info))
> @@ -2913,7 +2935,7 @@ static const struct flash_info
> *spi_nor_get_flash_info(struct spi_nor *nor,
> if (name && !detected_info && info->id_len) {
> const struct flash_info *jinfo;
>
> - jinfo = spi_nor_read_id(nor);
> + jinfo = spi_nor_detect(nor);
> if (IS_ERR(jinfo)) {
> return jinfo;
> } else if (jinfo != info) {
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index b7fd760e3b47..f952061d5c24 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -11,6 +11,13 @@
>
> #define SPI_NOR_MAX_ID_LEN 6
>
> +/* Standard SPI NOR flash operations. */
> +#define SPI_NOR_READID_OP(naddr, ndummy, buf, len) \
> + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 0), \
> + SPI_MEM_OP_ADDR(naddr, 0, 0), \
> + SPI_MEM_OP_DUMMY(ndummy, 0), \
> + SPI_MEM_OP_DATA_IN(len, buf, 0))
> +
> enum spi_nor_option_flags {
> SNOR_F_HAS_SR_TB = BIT(0),
> SNOR_F_NO_OP_CHIP_ERASE = BIT(1),
> @@ -534,6 +541,8 @@ void spi_nor_unlock_and_unprep(struct spi_nor
> *nor);
> int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
> int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
> int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
> +int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id,
> + enum spi_nor_protocol reg_proto);
> int spi_nor_read_sr(struct spi_nor *nor, u8 *sr);
> int spi_nor_sr_ready(struct spi_nor *nor);
> int spi_nor_read_cr(struct spi_nor *nor, u8 *cr);
--
-michael
Powered by blists - more mailing lists