| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220321081355.6802-6-quan@os.amperecomputing.com>
Date: Mon, 21 Mar 2022 15:13:51 +0700
From: Quan Nguyen <quan@...amperecomputing.com>
To: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Jonathan Corbet <corbet@....net>,
Derek Kiernan <derek.kiernan@...inx.com>,
Dragan Cvetic <dragan.cvetic@...inx.com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Quan Nguyen <quan@...amperecomputing.com>,
Thu Nguyen <thu@...amperecomputing.com>,
Gustavo Pimentel <Gustavo.Pimentel@...opsys.com>,
linux-kernel@...r.kernel.org (open list),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS),
linux-hwmon@...r.kernel.org (open list:HARDWARE MONITORING),
linux-doc@...r.kernel.org (open list:DOCUMENTATION),
OpenBMC Maillist <openbmc@...ts.ozlabs.org>
Cc: Open Source Submission <patches@...erecomputing.com>,
Phong Vo <phong@...amperecomputing.com>,
"Thang Q . Nguyen" <thang@...amperecomputing.com>
Subject: [PATCH v7 5/9] misc: smpro-misc: Add Ampere's Altra SMpro misc driver
This commit adds driver support for accessing various information
reported by Ampere's SMpro co-processor such as Boot Progress and
other miscellaneous data.
Signed-off-by: Quan Nguyen <quan@...amperecomputing.com>
---
Changes in v7:
+ Fix wrong return type of *_show/store() functions [kernel robot
test]
+ Adjust patch order to remove dependence with smpro-mfd [Lee
Jones]
Changes in v6:
+ First introduced in v6 [Quan]
drivers/misc/Kconfig | 7 ++
drivers/misc/Makefile | 1 +
drivers/misc/smpro-misc.c | 177 ++++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+)
create mode 100644 drivers/misc/smpro-misc.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e1a0b451f3d..f1371d6584e8 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -183,6 +183,13 @@ config SMPRO_ERRMON
If you say yes here you get support for error monitor function
provides by Ampere Computing's SoC with SMpro processor.
+config SMPRO_MISC
+ tristate "Ampere Computing SMPro miscellaneous driver"
+ depends on MFD_SMPRO || COMPILE_TEST
+ help
+ If you say yes here you get support for the miscellaleous function
+ provides by Ampere Computing's SoC with SMpro processor.
+
config CS5535_MFGPT
tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
depends on MFD_CS5535
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 483308a6e113..e61e462924d0 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_SMPRO_ERRMON) += smpro-errmon.o
+obj-$(CONFIG_SMPRO_MISC) += smpro-misc.o
obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o
obj-$(CONFIG_GEHC_ACHC) += gehc-achc.o
obj-$(CONFIG_HP_ILO) += hpilo.o
diff --git a/drivers/misc/smpro-misc.c b/drivers/misc/smpro-misc.c
new file mode 100644
index 000000000000..fadaa66a699e
--- /dev/null
+++ b/drivers/misc/smpro-misc.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Ampere Computing SoC's SMpro Misc Driver
+ *
+ * Copyright (c) 2022, Ampere Computing LLC
+ */
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* Boot Stage/Progress Registers */
+#define BOOTSTAGE_SELECT 0xB0
+#define BOOTSTAGE_STATUS_LO 0xB1
+#define BOOTSTAGE_CUR_STAGE 0xB2
+#define BOOTSTAGE_STATUS_HI 0xB3
+
+/* SOC State Registers */
+#define SOC_POWER_LIMIT 0xE5
+
+/* Boot stages */
+enum {
+ BOOTSTAGE_SMPRO = 0,
+ BOOTSTAGE_PMPRO,
+ BOOTSTAGE_ATF_BL1,
+ BOOTSTAGE_DDR_INIT,
+ BOOTSTAGE_DDR_INIT_PROGRESS,
+ BOOTSTAGE_ATF_BL2,
+ BOOTSTAGE_ATF_BL31,
+ BOOTSTAGE_ATF_BL32,
+ BOOTSTAGE_UEFI,
+ BOOTSTAGE_OS,
+ BOOTSTAGE_MAX
+};
+
+struct smpro_misc {
+ struct regmap *regmap;
+};
+
+static ssize_t boot_progress_show(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct smpro_misc *misc = dev_get_drvdata(dev);
+ u32 boot_progress;
+ u8 current_stage;
+ u8 boot_status;
+ u8 boot_stage;
+ u32 select;
+ u32 reg_lo;
+ u32 reg;
+ int ret;
+
+ /* Read current boot stage */
+ ret = regmap_read(misc->regmap, BOOTSTAGE_CUR_STAGE, ®);
+ if (ret)
+ return ret;
+
+ current_stage = reg & 0xff;
+
+ /* Read the boot progress */
+ ret = regmap_read(misc->regmap, BOOTSTAGE_SELECT, &select);
+ if (ret)
+ return ret;
+
+ boot_stage = (select >> 8) & 0xff;
+ boot_status = select & 0xff;
+
+ if (boot_stage > current_stage)
+ return -EINVAL;
+
+ ret = regmap_read(misc->regmap, BOOTSTAGE_STATUS_LO, ®_lo);
+ if (!ret)
+ ret = regmap_read(misc->regmap, BOOTSTAGE_STATUS_HI, ®);
+ if (ret)
+ return ret;
+
+ boot_progress = swab16(reg) << 16 | swab16(reg_lo);
+
+ /* Tell firmware to provide next boot stage next time */
+ if (boot_stage < current_stage) {
+ ret = regmap_write(misc->regmap, BOOTSTAGE_SELECT, ((select & 0xff00) | 0x1));
+ if (ret)
+ return ret;
+ }
+
+ return snprintf(buf, PAGE_SIZE, "0x%02x 0x%02x 0x%08x\n",
+ boot_stage, boot_status, boot_progress);
+}
+
+static DEVICE_ATTR_RO(boot_progress);
+
+static ssize_t soc_power_limit_show(struct device *dev, struct device_attribute *da, char *buf)
+{
+ struct smpro_misc *misc = dev_get_drvdata(dev);
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(misc->regmap, SOC_POWER_LIMIT, &value);
+ if (ret)
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static ssize_t soc_power_limit_store(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct smpro_misc *misc = dev_get_drvdata(dev);
+ unsigned long val;
+ s32 ret;
+
+ ret = kstrtoul(buf, 0, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(misc->regmap, SOC_POWER_LIMIT, (unsigned int)val);
+ if (ret)
+ return -EPROTO;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(soc_power_limit);
+
+static struct attribute *smpro_misc_attrs[] = {
+ &dev_attr_boot_progress.attr,
+ &dev_attr_soc_power_limit.attr,
+ NULL
+};
+
+static const struct attribute_group smpro_misc_attr_group = {
+ .attrs = smpro_misc_attrs
+};
+
+static int smpro_misc_probe(struct platform_device *pdev)
+{
+ struct smpro_misc *misc;
+ int ret;
+
+ misc = devm_kzalloc(&pdev->dev, sizeof(struct smpro_misc), GFP_KERNEL);
+ if (!misc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, misc);
+
+ misc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!misc->regmap)
+ return -ENODEV;
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &smpro_misc_attr_group);
+ if (ret)
+ dev_err(&pdev->dev, "SMPro misc sysfs registration failed\n");
+
+ return 0;
+}
+
+static int smpro_misc_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, &smpro_misc_attr_group);
+ pr_info("SMPro misc sysfs entries removed");
+
+ return 0;
+}
+
+static struct platform_driver smpro_misc_driver = {
+ .probe = smpro_misc_probe,
+ .remove = smpro_misc_remove,
+ .driver = {
+ .name = "smpro-misc",
+ },
+};
+
+module_platform_driver(smpro_misc_driver);
+
+MODULE_AUTHOR("Tung Nguyen <tungnguyen@...amperecomputing.com>");
+MODULE_AUTHOR("Quan Nguyen <quan@...amperecomputing.com>");
+MODULE_DESCRIPTION("Ampere Altra SMpro Misc driver");
+MODULE_LICENSE("GPL");
--
2.35.1
Powered by blists - more mailing lists