| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 Mar 2022 14:12:10 +0100
From: Christophe Branchereau <cbranchereau@...il.com>
To: Paul Cercueil <paul@...pouillou.net>
Cc: David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>, linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org, dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH v1 3/3] drm/panel : innolux-ej030na and abt-y030xx067a :
add .enable and .disable
Hi Paul, yes that works fine, thanks for checking it out
On Mon, Mar 14, 2022 at 9:54 PM Paul Cercueil <paul@...pouillou.net> wrote:
>
> Hi Christophe,
>
> Le lun., mars 7 2022 at 19:12:49 +0100, Christophe Branchereau
> <cbranchereau@...il.com> a écrit :
> > Hi Paul, it should in theory, but doesn't work in practice, the
> > display doesn't like having that bit set outside of the init sequence.
> >
> > Feel free to experiment if you think you can make it work though, you
> > should have that panel on 1 or 2 devices I think.
>
> It does actually work in practice; what probably fails for you is the
> regmap_set_bits(), which causes a spi-read-then-write. Since AFAIK it
> is not possible to read registers from this panel (only write), then
> this does not work.
>
> An easy fix would be to just use REGCACHE_FLAT as the cache type in the
> regmap_config. Then regmap_set_bits() can be used.
>
> Cheers,
> -Paul
>
> >
> > KR
> > CB
> >
> > On Wed, Mar 2, 2022 at 12:22 PM Paul Cercueil <paul@...pouillou.net>
> > wrote:
> >>
> >> Hi Christophe,
> >>
> >> Le mar., mars 1 2022 at 16:31:22 +0100, Christophe Branchereau
> >> <cbranchereau@...il.com> a écrit :
> >> > Following the introduction of bridge_atomic_enable in the ingenic
> >> > drm driver, the crtc is enabled between .prepare and .enable, if
> >> > it exists.
> >> >
> >> > Add it so the backlight is only enabled after the crtc is, to
> >> avoid
> >> > graphical issues.
> >> >
> >> > Signed-off-by: Christophe Branchereau <cbranchereau@...il.com>
> >> > ---
> >> > drivers/gpu/drm/panel/panel-abt-y030xx067a.c | 23 ++++++++++++--
> >> > drivers/gpu/drm/panel/panel-innolux-ej030na.c | 31
> >> > ++++++++++++++++---
> >> > 2 files changed, 48 insertions(+), 6 deletions(-)
> >> >
> >> > diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> >> > b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> >> > index f043b484055b..b5736344e3ec 100644
> >> > --- a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> >> > +++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
> >> > @@ -183,8 +183,6 @@ static int y030xx067a_prepare(struct drm_panel
> >> > *panel)
> >> > goto err_disable_regulator;
> >> > }
> >> >
> >> > - msleep(120);
> >> > -
> >> > return 0;
> >> >
> >> > err_disable_regulator:
> >> > @@ -202,6 +200,25 @@ static int y030xx067a_unprepare(struct
> >> drm_panel
> >> > *panel)
> >> > return 0;
> >> > }
> >> >
> >> > +static int y030xx067a_enable(struct drm_panel *panel)
> >> > +{
> >> > + if (panel->backlight) {
> >> > + /* Wait for the picture to be ready before enabling
> >> backlight */
> >> > + msleep(120);
> >> > + }
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > +static int y030xx067a_disable(struct drm_panel *panel)
> >> > +{
> >> > + struct y030xx067a *priv = to_y030xx067a(panel);
> >> > +
> >> > + regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
> >>
> >> Shouldn't that be balanced by a regmap_set_bits() in the .enable()
> >> function?
> >>
> >> Cheers,
> >> -Paul
> >>
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > static int y030xx067a_get_modes(struct drm_panel *panel,
> >> > struct drm_connector *connector)
> >> > {
> >> > @@ -239,6 +256,8 @@ static int y030xx067a_get_modes(struct
> >> drm_panel
> >> > *panel,
> >> > static const struct drm_panel_funcs y030xx067a_funcs = {
> >> > .prepare = y030xx067a_prepare,
> >> > .unprepare = y030xx067a_unprepare,
> >> > + .enable = y030xx067a_enable,
> >> > + .disable = y030xx067a_disable,
> >> > .get_modes = y030xx067a_get_modes,
> >> > };
> >> >
> >> > diff --git a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> >> > b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> >> > index c558de3f99be..6de7370185cd 100644
> >> > --- a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> >> > +++ b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
> >> > @@ -80,8 +80,6 @@ static const struct reg_sequence
> >> > ej030na_init_sequence[] = {
> >> > { 0x47, 0x08 },
> >> > { 0x48, 0x0f },
> >> > { 0x49, 0x0f },
> >> > -
> >> > - { 0x2b, 0x01 },
> >> > };
> >> >
> >> > static int ej030na_prepare(struct drm_panel *panel)
> >> > @@ -109,8 +107,6 @@ static int ej030na_prepare(struct drm_panel
> >> > *panel)
> >> > goto err_disable_regulator;
> >> > }
> >> >
> >> > - msleep(120);
> >> > -
> >> > return 0;
> >> >
> >> > err_disable_regulator:
> >> > @@ -128,6 +124,31 @@ static int ej030na_unprepare(struct drm_panel
> >> > *panel)
> >> > return 0;
> >> > }
> >> >
> >> > +static int ej030na_enable(struct drm_panel *panel)
> >> > +{
> >> > + struct ej030na *priv = to_ej030na(panel);
> >> > +
> >> > + /* standby off */
> >> > + regmap_write(priv->map, 0x2b, 0x01);
> >> > +
> >> > + if (panel->backlight) {
> >> > + /* Wait for the picture to be ready before enabling
> >> backlight */
> >> > + msleep(120);
> >> > + }
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > +static int ej030na_disable(struct drm_panel *panel)
> >> > +{
> >> > + struct ej030na *priv = to_ej030na(panel);
> >> > +
> >> > + /* standby on */
> >> > + regmap_write(priv->map, 0x2b, 0x00);
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > static int ej030na_get_modes(struct drm_panel *panel,
> >> > struct drm_connector *connector)
> >> > {
> >> > @@ -165,6 +186,8 @@ static int ej030na_get_modes(struct drm_panel
> >> > *panel,
> >> > static const struct drm_panel_funcs ej030na_funcs = {
> >> > .prepare = ej030na_prepare,
> >> > .unprepare = ej030na_unprepare,
> >> > + .enable = ej030na_enable,
> >> > + .disable = ej030na_disable,
> >> > .get_modes = ej030na_get_modes,
> >> > };
> >> >
> >> > --
> >> > 2.34.1
> >> >
> >>
> >>
>
>
Powered by blists - more mailing lists