linux-kernel - Re: [PATCH v11 2/5] usb: dwc3: core: Host wake up support from system suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220322083221.GJ23316@hu-pkondeti-hyd.qualcomm.com>
Date:   Tue, 22 Mar 2022 14:02:21 +0530
From:   Pavan Kondeti <quic_pkondeti@...cinc.com>
To:     Sandeep Maheswaram <quic_c_sanm@...cinc.com>
CC:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Felipe Balbi <balbi@...nel.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Doug Anderson <dianders@...omium.org>,
        "Matthias Kaehlcke" <mka@...omium.org>,
        Mathias Nyman <mathias.nyman@...el.com>,
        <linux-arm-msm@...r.kernel.org>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <quic_pkondeti@...cinc.com>,
        <quic_ppratap@...cinc.com>, <quic_kriskura@...cinc.com>
Subject: Re: [PATCH v11 2/5] usb: dwc3: core: Host wake up support from
 system suspend

Hi Sandeep,

On Tue, Mar 22, 2022 at 12:37:53PM +0530, Sandeep Maheswaram wrote:
> During suspend read the status of all port and make sure the PHYs
> are in the correct mode based on current speed.
> Phy interrupt masks are set based on this mode. Keep track of the mode
> of the HS PHY to be able to configure wakeup properly.
> 
> Also check during suspend if any wakeup capable devices are
> connected to the controller (directly or through hubs), if there
> are none set a flag to indicate that the PHY is powered
> down during suspend.
> 
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
> ---
>  drivers/usb/dwc3/core.c | 54 ++++++++++++++++++++++++++++++++++++++++---------
>  1 file changed, 45 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 1170b80..232a734 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -32,12 +32,14 @@
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/of.h>
>  #include <linux/usb/otg.h>
> +#include <linux/usb/hcd.h>
>  
>  #include "core.h"
>  #include "gadget.h"
>  #include "io.h"
>  
>  #include "debug.h"
> +#include "../host/xhci.h"
>  
>  #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
>  
> @@ -1861,10 +1863,36 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>  	return ret;
>  }
>  
> +static void dwc3_set_phy_speed_mode(struct dwc3 *dwc)
> +{
> +
> +	int i, num_ports;
> +	u32 reg;
> +	struct usb_hcd	*hcd = platform_get_drvdata(dwc->xhci);
> +	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
> +
> +	dwc->hs_phy_mode = 0;
> +
> +	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> +
> +	num_ports = HCS_MAX_PORTS(reg);
> +	for (i = 0; i < num_ports; i++) {
> +		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
> +		if (reg & PORT_PE) {
> +			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
> +			else if (DEV_LOWSPEED(reg))
> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
> +		}
> +	}
> +	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);
> +}

Are these flags cleared somewhere? Also qcom-snps-hs phy driver checks
for (hsphy->mode == PHY_MODE_USB_HOST) condition in qcom_snps_hsphy_suspend
to enable auto-resume. PHY_MODE_USB_HOST_HS/PHY_MODE_USB_HOST_LS flags
are different from PHY_MODE_USB_HOST. Currently this flag is set from
__dwc3_set_mode() when entering host mode. Can you clarify your intention
in calling phy_set_mode() here.

Thanks,
Pavan