| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADBw62pAitwJK6cf_zMo-N=-NGf3Y5S9SPBRcLpbz5yzNefQOQ@mail.gmail.com>
Date: Wed, 23 Mar 2022 21:55:47 +0800
From: Baolin Wang <baolin.wang7@...il.com>
To: Cixi Geng <gengcixi@...il.com>
Cc: jic23@...nel.org, Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Orson Zhai <orsonzhai@...il.com>,
Chunyan Zhang <zhang.lyra@...il.com>, lgirdwood@...il.com,
Mark Brown <broonie@...nel.org>,
朱玉明 (Yuming Zhu/11457)
<yuming.zhu1@...soc.com>, linux-iio@...r.kernel.org,
Devicetree List <devicetree@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V2 3/7] iio: adc: sc27xx: structure adjuststment and optimization
On Sat, Mar 12, 2022 at 12:47 AM Cixi Geng <gengcixi@...il.com> wrote:
>
> From: Cixi Geng <cixi.geng1@...soc.com>
>
> Introduce one variant device data structure to be compatible
> with SC2731 PMIC since it has different scale and ratio calculation
> and so on.
>
> Signed-off-by: Yuming Zhu <yuming.zhu1@...soc.com>
> Signed-off-by: Cixi Geng <cixi.geng1@...soc.com>
> ---
> drivers/iio/adc/sc27xx_adc.c | 95 ++++++++++++++++++++++++++++++------
> 1 file changed, 80 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
> index aee076c8e2b1..68629fbcfec5 100644
> --- a/drivers/iio/adc/sc27xx_adc.c
> +++ b/drivers/iio/adc/sc27xx_adc.c
> @@ -12,9 +12,9 @@
> #include <linux/slab.h>
>
> /* PMIC global registers definition */
> -#define SC27XX_MODULE_EN 0xc08
> +#define SC2731_MODULE_EN 0xc08
> #define SC27XX_MODULE_ADC_EN BIT(5)
> -#define SC27XX_ARM_CLK_EN 0xc10
> +#define SC2731_ARM_CLK_EN 0xc10
> #define SC27XX_CLK_ADC_EN BIT(5)
> #define SC27XX_CLK_ADC_CLK_EN BIT(6)
>
> @@ -78,6 +78,23 @@ struct sc27xx_adc_data {
> int channel_scale[SC27XX_ADC_CHANNEL_MAX];
> u32 base;
> int irq;
> + const struct sc27xx_adc_variant_data *var_data;
> +};
> +
> +/*
> + * Since different PMICs of SC27xx series can have different
> + * address and ratio, we should save ratio config and base
> + * in the device data structure.
> + */
> +struct sc27xx_adc_variant_data {
> + u32 module_en;
> + u32 clk_en;
> + u32 scale_shift;
> + u32 scale_mask;
> + const struct sc27xx_adc_linear_graph *bscale_cal;
> + const struct sc27xx_adc_linear_graph *sscale_cal;
> + void (*init_scale)(struct sc27xx_adc_data *data);
> + int (*get_ratio)(int channel, int scale);
> };
>
> struct sc27xx_adc_linear_graph {
> @@ -103,6 +120,17 @@ static struct sc27xx_adc_linear_graph small_scale_graph = {
> 100, 341,
> };
>
> +/* Add these for sc2731 pmic, and the [big|small]_scale_graph_calib for common's */
> +static const struct sc27xx_adc_linear_graph sc2731_big_scale_graph_calib = {
> + 4200, 850,
> + 3600, 728,
> +};
> +
> +static const struct sc27xx_adc_linear_graph sc2731_small_scale_graph_calib = {
> + 1000, 838,
> + 100, 84,
> +};
> +
> static const struct sc27xx_adc_linear_graph big_scale_graph_calib = {
> 4200, 856,
> 3600, 733,
> @@ -130,11 +158,11 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
> size_t len;
>
> if (big_scale) {
> - calib_graph = &big_scale_graph_calib;
> + calib_graph = data->var_data->bscale_cal;
> graph = &big_scale_graph;
> cell_name = "big_scale_calib";
> } else {
> - calib_graph = &small_scale_graph_calib;
> + calib_graph = data->var_data->sscale_cal;
Now which function will use big_scale_graph_calib and
small_scale_graph_calib? Seems you add an unused warning?
> graph = &small_scale_graph;
> cell_name = "small_scale_calib";
> }
> @@ -160,7 +188,7 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
> return 0;
> }
>
> -static int sc27xx_adc_get_ratio(int channel, int scale)
> +static int sc2731_adc_get_ratio(int channel, int scale)
> {
> switch (channel) {
> case 1:
> @@ -185,6 +213,21 @@ static int sc27xx_adc_get_ratio(int channel, int scale)
> return SC27XX_VOLT_RATIO(1, 1);
> }
>
> +/*
> + * According to the datasheet set specific value on some channel.
> + */
> +static void sc2731_adc_scale_init(struct sc27xx_adc_data *data)
> +{
> + int i;
> +
> + for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) {
> + if (i == 5)
> + data->channel_scale[i] = 1;
Can you add some comments to explain why channel 5 needs to set scale to 1?
> + else
> + data->channel_scale[i] = 0;
> + }
> +}
> +
> static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
> int scale, int *val)
> {
> @@ -208,10 +251,11 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
> goto disable_adc;
>
> /* Configure the channel id and scale */
> - tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
> + tmp = (scale << data->var_data->scale_shift) & data->var_data->scale_mask;
> tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
> ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
> - SC27XX_ADC_CHN_ID_MASK | SC27XX_ADC_SCALE_MASK,
> + SC27XX_ADC_CHN_ID_MASK |
> + data->var_data->scale_mask,
> tmp);
> if (ret)
> goto disable_adc;
> @@ -262,8 +306,9 @@ static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
> int channel, int scale,
> u32 *div_numerator, u32 *div_denominator)
> {
> - u32 ratio = sc27xx_adc_get_ratio(channel, scale);
> + u32 ratio;
>
> + ratio = data->var_data->get_ratio(channel, scale);
> *div_numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
> *div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
> }
> @@ -432,13 +477,13 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
> {
> int ret;
>
> - ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> + ret = regmap_update_bits(data->regmap, data->var_data->module_en,
> SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
> if (ret)
> return ret;
>
> /* Enable ADC work clock and controller clock */
> - ret = regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> + ret = regmap_update_bits(data->regmap, data->var_data->clk_en,
> SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
> SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
> if (ret)
> @@ -456,10 +501,10 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
> return 0;
>
> disable_clk:
> - regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> + regmap_update_bits(data->regmap, data->var_data->clk_en,
> SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> disable_adc:
> - regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> + regmap_update_bits(data->regmap, data->var_data->module_en,
> SC27XX_MODULE_ADC_EN, 0);
>
> return ret;
> @@ -470,21 +515,39 @@ static void sc27xx_adc_disable(void *_data)
> struct sc27xx_adc_data *data = _data;
>
> /* Disable ADC work clock and controller clock */
> - regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> + regmap_update_bits(data->regmap, data->var_data->clk_en,
> SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
>
> - regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> + regmap_update_bits(data->regmap, data->var_data->module_en,
> SC27XX_MODULE_ADC_EN, 0);
> }
>
> +static const struct sc27xx_adc_variant_data sc2731_data = {
> + .module_en = SC2731_MODULE_EN,
> + .clk_en = SC2731_ARM_CLK_EN,
> + .scale_shift = SC27XX_ADC_SCALE_SHIFT,
> + .scale_mask = SC27XX_ADC_SCALE_MASK,
> + .bscale_cal = &sc2731_big_scale_graph_calib,
> + .sscale_cal = &sc2731_small_scale_graph_calib,
> + .init_scale = sc2731_adc_scale_init,
> + .get_ratio = sc2731_adc_get_ratio,
> +};
> +
> static int sc27xx_adc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct device_node *np = dev->of_node;
> struct sc27xx_adc_data *sc27xx_data;
> + const struct sc27xx_adc_variant_data *pdata;
> struct iio_dev *indio_dev;
> int ret;
>
> + pdata = of_device_get_match_data(dev);
> + if (!pdata) {
> + dev_err(dev, "No matching driver data found\n");
> + return -EINVAL;
> + }
> +
> indio_dev = devm_iio_device_alloc(dev, sizeof(*sc27xx_data));
> if (!indio_dev)
> return -ENOMEM;
> @@ -520,6 +583,8 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
> }
>
> sc27xx_data->dev = dev;
> + sc27xx_data->var_data = pdata;
> + sc27xx_data->var_data->init_scale(sc27xx_data);
>
> ret = sc27xx_adc_enable(sc27xx_data);
> if (ret) {
> @@ -546,7 +611,7 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
> }
>
> static const struct of_device_id sc27xx_adc_of_match[] = {
> - { .compatible = "sprd,sc2731-adc", },
> + { .compatible = "sprd,sc2731-adc", .data = &sc2731_data},
> { }
> };
> MODULE_DEVICE_TABLE(of, sc27xx_adc_of_match);
> --
> 2.25.1
>
--
Baolin Wang
Powered by blists - more mailing lists