| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YjtlQ3PJT7TBa/fK@google.com>
Date: Wed, 23 Mar 2022 18:21:55 +0000
From: Mingwei Zhang <mizhang@...gle.com>
To: Ben Gardon <bgardon@...gle.com>
Cc: Paolo Bonzini <pbonzini@...hat.com>,
Sean Christopherson <seanjc@...gle.com>,
Vitaly Kuznetsov <vkuznets@...hat.com>,
Wanpeng Li <wanpengli@...cent.com>,
Jim Mattson <jmattson@...gle.com>,
Joerg Roedel <joro@...tes.org>, kvm@...r.kernel.org,
linux-kernel@...r.kernel.org, David Matlack <dmatlack@...gle.com>,
Jing Zhang <jingzhangos@...gle.com>,
Peter Xu <peterx@...hat.com>, Ben Gardon <bgardon@...gle.com>
Subject: Re: [PATCH 4/4] selftests: KVM: use dirty logging to check if page
stats work correctly
On Mon, Mar 21, 2022, Ben Gardon wrote:
> On Sun, Mar 20, 2022 at 5:26 PM Mingwei Zhang <mizhang@...gle.com> wrote:
> >
> > When dirty logging is enabled, KVM splits the all hugepage mapping in
> > NPT/EPT into the smallest 4K size. This property could be used to check if
>
> Note this is only true if eager page splitting is enabled. It would be
> more accurate to say:
> "While dirty logging is enabled, KVM will re-map any accessed page in
> NPT/EPT at 4K."
>
> > the page stats metrics work properly in KVM mmu. At the same time, this
> > logic might be used the other way around: using page stats to verify if
> > dirty logging really splits all huge pages. Moreover, when dirty logging is
>
> It might be worth having a follow up commit which checks if eager
> splitting is enabled and changes the assertions accordingly.
>
> > disabled, KVM zaps corresponding SPTEs and we could check whether the large
> > pages come back when guest touches the pages again.
> >
> > So add page stats checking in dirty logging performance selftest. In
> > particular, add checks in three locations:
> > - just after vm is created;
> > - after populating memory into vm but before enabling dirty logging;
> > - just after turning on dirty logging.
>
> Note a key stage here is after dirty logging is enabled, and then the
> VM touches all the memory in the data region.
> I believe that's the point at which you're making the assertion that
> all mappings are 4k currently, which is the right place if eager
> splitting is not enabled.
>
> > - after one final iteration after turning off dirty logging.
> >
> > Tested using commands:
> > - ./dirty_log_perf_test -s anonymous_hugetlb_1gb
> > - ./dirty_log_perf_test -s anonymous_thp
> >
> > Cc: Sean Christopherson <seanjc@...gle.com>
> > Cc: David Matlack <dmatlack@...gle.com>
> > Cc: Jing Zhang <jingzhangos@...gle.com>
> > Cc: Peter Xu <peterx@...hat.com>
> >
> > Suggested-by: Ben Gardon <bgorden@...gle.com>
> > Signed-off-by: Mingwei Zhang <mizhang@...gle.com>
> > ---
> > .../selftests/kvm/dirty_log_perf_test.c | 52 +++++++++++++++++++
> > 1 file changed, 52 insertions(+)
> >
> > diff --git a/tools/testing/selftests/kvm/dirty_log_perf_test.c b/tools/testing/selftests/kvm/dirty_log_perf_test.c
> > index 1954b964d1cf..ab0457d91658 100644
> > --- a/tools/testing/selftests/kvm/dirty_log_perf_test.c
> > +++ b/tools/testing/selftests/kvm/dirty_log_perf_test.c
> > @@ -19,6 +19,10 @@
> > #include "perf_test_util.h"
> > #include "guest_modes.h"
> >
> > +#ifdef __x86_64__
> > +#include "processor.h"
> > +#endif
> > +
> > /* How many host loops to run by default (one KVM_GET_DIRTY_LOG for each loop)*/
> > #define TEST_HOST_LOOP_N 2UL
> >
> > @@ -185,6 +189,14 @@ static void run_test(enum vm_guest_mode mode, void *arg)
> > p->slots, p->backing_src,
> > p->partition_vcpu_memory_access);
> >
> > +#ifdef __x86_64__
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_4k") == 0,
> > + "4K page is non zero");
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_2m") == 0,
> > + "2M page is non zero");
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_1g") == 0,
> > + "1G page is non zero");
> > +#endif
> > perf_test_set_wr_fract(vm, p->wr_fract);
> >
> > guest_num_pages = (nr_vcpus * guest_percpu_mem_size) >> vm_get_page_shift(vm);
> > @@ -222,6 +234,16 @@ static void run_test(enum vm_guest_mode mode, void *arg)
> > pr_info("Populate memory time: %ld.%.9lds\n",
> > ts_diff.tv_sec, ts_diff.tv_nsec);
> >
> > +#ifdef __x86_64__
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_4k") != 0,
> > + "4K page is zero");
> > + if (p->backing_src == VM_MEM_SRC_ANONYMOUS_THP)
>
> This should also handle 2M hugetlb memory.
> I think there might be a library function to translate backing src
> type to page size too, which could make this check cleaner.
>
Just went through the selftest code again, it seems this logic a quite
x86 and there were no similar checks in other places. So I think I'll
just add another condition here for now.
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_2m") != 0,
> > + "2M page is zero");
> > + if (p->backing_src == VM_MEM_SRC_ANONYMOUS_HUGETLB_1GB)
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_1g") != 0,
> > + "1G page is zero");
> > +#endif
> > /* Enable dirty logging */
> > clock_gettime(CLOCK_MONOTONIC, &start);
> > enable_dirty_logging(vm, p->slots);
> > @@ -267,6 +289,14 @@ static void run_test(enum vm_guest_mode mode, void *arg)
> > iteration, ts_diff.tv_sec, ts_diff.tv_nsec);
> > }
> > }
> > +#ifdef __x86_64__
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_4k") != 0,
> > + "4K page is zero after dirty logging");
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_2m") == 0,
> > + "2M page is non-zero after dirty logging");
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_1g") == 0,
> > + "1G page is non-zero after dirty logging");
> > +#endif
>
> Note this is after dirty logging has been enabled, AND all pages in
> the data region have been written by the guest.
>
> >
> > /* Disable dirty logging */
> > clock_gettime(CLOCK_MONOTONIC, &start);
> > @@ -275,6 +305,28 @@ static void run_test(enum vm_guest_mode mode, void *arg)
> > pr_info("Disabling dirty logging time: %ld.%.9lds\n",
> > ts_diff.tv_sec, ts_diff.tv_nsec);
> >
> > +#ifdef __x86_64__
> > + /*
> > + * Increment iteration to run the vcpus again to verify if huge pages
> > + * come back.
> > + */
> > + iteration++;
> > + pr_info("Starting the final iteration to verify page stats\n");
> > +
> > + for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++) {
> > + while (READ_ONCE(vcpu_last_completed_iteration[vcpu_id])
> > + != iteration)
> > + ;
> > + }
>
> We might as well do this on all archs. Even without the stats, it at
> least validates that disabling dirty logging doesn't break the VM.
>
> > +
> > + if (p->backing_src == VM_MEM_SRC_ANONYMOUS_THP)
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_2m") != 0,
> > + "2M page is zero");
> > + if (p->backing_src == VM_MEM_SRC_ANONYMOUS_HUGETLB_1GB)
> > + TEST_ASSERT(vm_get_single_stat(vm, "pages_1g") != 0,
> > + "1G page is zero");
> > +#endif
> > +
> > /* Tell the vcpu thread to quit */
> > host_quit = true;
> > perf_test_join_vcpu_threads(nr_vcpus);
> > --
> > 2.35.1.894.gb6a874cedc-goog
> >
Powered by blists - more mailing lists