linux-kernel - [PATCH v2] USB:Fix ehci infinite suspend-resume loop issue in zhaoxin

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220324121735.3803-1-WeitaoWang-oc@zhaoxin.com>
Date:   Thu, 24 Mar 2022 20:17:35 +0800
From:   WeitaoWangoc <WeitaoWang-oc@...oxin.com>
To:     <stern@...land.harvard.edu>, <gregkh@...uxfoundation.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <tonywwang@...oxin.com>, <weitaowang@...oxin.com>,
        <CobeChen@...oxin.com>, Weitao Wang <WeitaoWang-oc@...oxin.com>
Subject: [PATCH v2] USB:Fix ehci infinite suspend-resume loop issue in zhaoxin

In zhaoxin platform, some ehci projects will latch a wakeup signal
internal when plug in a device on port during system S0. This wakeup
signal will turn on when ehci runtime suspend, which will trigger a
system control interrupt that will resume ehci back to D0. As no
device connect, ehci will be set to runtime suspend and turn on the
internal latched wakeup signal again. It will cause a suspend-resume
loop and generate system control interrupt continuously.

Fixed this issue by clear wakeup signal latched in ehci internal when
ehci resume callback is called.

Signed-off-by: Weitao Wang <WeitaoWang-oc@...oxin.com>
---
v1->v2
 - Improve this patch with not to clear STS_PCD bit.
 - Change a boolean flag name to make its meaning more obvious.
 - Fix "tabs converted to spaces" issue.

 drivers/usb/host/ehci-hcd.c | 23 +++++++++++++++++++++++
 drivers/usb/host/ehci-pci.c |  4 ++++
 drivers/usb/host/ehci.h     |  1 +
 3 files changed, 28 insertions(+)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 3d82e0b853be..684164fa9716 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1103,6 +1103,26 @@ static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev)
 
 #ifdef	CONFIG_PM
 
+/* Clear wakeup signal locked in zhaoxin platform when device plug in. */
+static void ehci_zx_wakeup_clear(struct ehci_hcd *ehci)
+{
+	u32 __iomem	*reg = &ehci->regs->port_status[4];
+	u32 		t1 = ehci_readl(ehci, reg);
+
+	t1 &= (u32)~0xf0000;
+	t1 |= PORT_TEST_FORCE;
+	ehci_writel(ehci, t1, reg);
+	t1 = ehci_readl(ehci, reg);
+	msleep(1);
+	t1 &= (u32)~0xf0000;
+	ehci_writel(ehci, t1, reg);
+	ehci_readl(ehci, reg);
+	msleep(1);
+	t1 = ehci_readl(ehci, reg);
+	ehci_writel(ehci, t1 | PORT_CSC, reg);
+	ehci_readl(ehci, reg);
+}
+
 /* suspend/resume, section 4.3 */
 
 /* These routines handle the generic parts of controller suspend/resume */
@@ -1154,6 +1174,9 @@ int ehci_resume(struct usb_hcd *hcd, bool force_reset)
 	if (ehci->shutdown)
 		return 0;		/* Controller is dead */
 
+	if (ehci->zx_wakeup_clear_needed)
+		ehci_zx_wakeup_clear(ehci);
+
 	/*
 	 * If CF is still set and reset isn't forced
 	 * then we maintained suspend power.
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index e87cf3a00fa4..b11a6f82aee2 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -222,6 +222,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			ehci->has_synopsys_hc_bug = 1;
 		}
 		break;
+	case PCI_VENDOR_ID_ZHAOXIN:
+		if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x90)
+			ehci->zx_wakeup_clear_needed = 1;
+		break;
 	}
 
 	/* optional debug port, normally in the first BAR */
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index fdd073cc053b..ad3f13a3eaf1 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -220,6 +220,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 	unsigned		spurious_oc:1;
 	unsigned		is_aspeed:1;
+	unsigned		zx_wakeup_clear_needed:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
-- 
2.32.0