lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YjyR/LrBeXeVd2J3@matsya>
Date:   Thu, 24 Mar 2022 21:15:00 +0530
From:   Vinod Koul <vkoul@...nel.org>
To:     Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc:     Rob Clark <robdclark@...il.com>, linux-arm-msm@...r.kernel.org,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Jonathan Marek <jonathan@...ek.ca>,
        Abhinav Kumar <abhinavk@...eaurora.org>,
        linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        freedreno@...ts.freedesktop.org
Subject: Re: [REPOST PATCH v4 13/13] drm/msm/dsi: Add support for DSC
 configuration

On 21-02-22, 05:11, Dmitry Baryshkov wrote:
> On 10/02/2022 13:34, Vinod Koul wrote:
> > When DSC is enabled, we need to configure DSI registers accordingly and
> > configure the respective stream compression registers.
> > 
> > Add support to calculate the register setting based on DSC params and
> > timing information and configure these registers.
> > 
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> > Signed-off-by: Vinod Koul <vkoul@...nel.org>
> > ---
> >   drivers/gpu/drm/msm/dsi/dsi.xml.h  |  10 +++
> >   drivers/gpu/drm/msm/dsi/dsi_host.c | 109 ++++++++++++++++++++++++++++-
> >   2 files changed, 118 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
> > index 49b551ad1bff..c1c85df58c4b 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
> > +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
> > @@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
> >   #define REG_DSI_CPHY_MODE_CTRL					0x000002d4
> > +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL			0x0000029c
> > +
> > +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2			0x000002a0
> > +
> > +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL			0x000002a4
> > +
> > +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2			0x000002a8
> > +
> > +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3			0x000002ac
> > +
> >   #endif /* DSI_XML */
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > index 438c80750682..3d8d5a1daaa3 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > @@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
> >   		dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
> >   }
> > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
> > +				  int pic_width, int pic_height)
> > +{
> > +	if (!dsc || !pic_width || !pic_height) {
> > +		pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
> > +		return -EINVAL;
> > +	}
> > +
> > +	dsc->drm->pic_width = pic_width;
> > +	dsc->drm->pic_height = pic_height;
> > +
> > +	return 0;
> > +}
> > +
> >   static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> >   {
> >   	struct drm_display_mode *mode = msm_host->mode;
> > @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> >   		hdisplay /= 2;
> >   	}
> > +	if (msm_host->dsc) {
> > +		struct msm_display_dsc_config *dsc = msm_host->dsc;
> > +
> > +		/* update dsc params with timing params */
> > +		dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
> > +		DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
> > +
> > +		/* we do the calculations for dsc parameters here so that
> > +		 * panel can use these parameters
> > +		 */
> > +		dsi_populate_dsc_params(dsc);
> > +
> > +		/* Divide the display by 3 but keep back/font porch and
> > +		 * pulse width same
> > +		 */
> > +		h_total -= hdisplay;
> > +		hdisplay /= 3;
> > +		h_total += hdisplay;
> > +		ha_end = ha_start + hdisplay;
> > +	}
> > +
> >   	if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
> > +		if (msm_host->dsc) {
> > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > +			u32 reg, intf_width, slice_per_intf;
> > +			u32 total_bytes_per_intf;
> > +
> > +			/* first calculate dsc parameters and then program
> > +			 * compress mode registers
> > +			 */
> > +			intf_width = hdisplay;
> > +			slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
> > +
> > +			dsc->drm->slice_count = 1;
> > +			dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
> > +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> > +
> > +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> > +			dsc->pclk_per_line =  DIV_ROUND_UP(total_bytes_per_intf, 3);
> > +			dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
> > +			dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
> > +
> > +			reg = dsc->bytes_per_pkt << 16;
> > +			reg |= (0x0b << 8);    /* dtype of compressed image */
> > +
> > +			/* pkt_per_line:
> > +			 * 0 == 1 pkt
> > +			 * 1 == 2 pkt
> > +			 * 2 == 4 pkt
> > +			 * 3 pkt is not supported
> > +			 * above translates to ffs() - 1
> > +			 */
> > +			reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
> > +
> > +			dsc->eol_byte_num = total_bytes_per_intf % 3;
> > +			reg |= dsc->eol_byte_num << 4;
> > +			reg |= 1;
> > +
> > +			dsi_write(msm_host,
> > +				  REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
> > +		}
> > +
> >   		dsi_write(msm_host, REG_DSI_ACTIVE_H,
> >   			DSI_ACTIVE_H_START(ha_start) |
> >   			DSI_ACTIVE_H_END(ha_end));
> > @@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
> >   			DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
> >   			DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
> >   	} else {		/* command mode */
> > +		if (msm_host->dsc) {
> > +			struct msm_display_dsc_config *dsc = msm_host->dsc;
> > +			u32 reg, reg_ctrl, reg_ctrl2;
> > +			u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
> > +
> > +			reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
> > +			reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
> > +
> > +			slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
> > +			bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
> > +						      dsc->drm->bits_per_pixel, 8);
> > +			dsc->drm->slice_chunk_size = bytes_in_slice;
> > +			total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
> 
> Should we use dsc->bytes_in_slice or just bytes_in_slice here?

This should be dsc->bytes_in_slice, fixed up now. Thanks for pointing

-- 
~Vinod

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ