| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 24 Mar 2022 15:24:23 -0400
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] first round of SCSI updates for the 5.15+ merge window
This series consists of the usual driver updates (qla2xxx, pm8001,
libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates
and bug fixes. The high blast radius core update is the removal of
write same, which affects block and several non-SCSI devices. The
other big change, which is more local, is the removal of the SCSI
pointer.
The write same removal has caused three conflicts so far, they're all
obvious, although it took me a few seconds to realise the rnd-clt.c one
is caused by another patch removing the rotational field.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Adrian Hunter (2):
scsi: ufs: Fix runtime PM messages never-ending cycle
scsi: core: sd: Add silence_suspend flag to suppress some PM messages
Ajish Koshy (1):
scsi: pm80xx: Handle non-fatal errors
Arun Easi (4):
scsi: qla2xxx: Fix crash during module load unload test
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests
scsi: qla2xxx: Fix loss of NVMe namespaces after driver reload test
scsi: qla2xxx: Fix device reconnect in loop topology
Balsundar P (1):
scsi: smartpqi: Resolve delay issue with PQI_HZ value
Bart Van Assche (48):
scsi: core: Remove struct scsi_pointer from struct scsi_cmnd
scsi: zalon: Stop using the SCSI pointer
scsi: wd33c93: Move the SCSI pointer to private command data
scsi: wd719x: Stop using the SCSI pointer
scsi: usb: Stop using the SCSI pointer
scsi: sym53c8xx_2: Move the SCSI pointer to private command data
scsi: smartpqi: Stop using the SCSI pointer
scsi: qla2xxx: Stop using the SCSI pointer
scsi: qla1280: Move the SCSI pointer to private command data
scsi: ppa: Move the SCSI pointer to private command data
scsi: sym53c500_cs: Move the SCSI pointer to private command data
scsi: nsp_cs: Move the SCSI pointer to private command data
scsi: nsp32: Stop using the SCSI pointer
scsi: mvumi: Stop using the SCSI pointer
scsi: mvsas: Fix a set-but-not-used warning
scsi: mesh: Move the SCSI pointer to private command data
scsi: megasas: Stop using the SCSI pointer
scsi: megaraid: Stop using the SCSI pointer
scsi: mac53c94: Move the SCSI pointer to private command data
scsi: mac53c94: Fix a set-but-not-used compiler warning
scsi: qedf: Stop using the SCSI pointer
scsi: bnx2fc: Stop using the SCSI pointer
scsi: libfc: Stop using the SCSI pointer
scsi: initio: Stop using the SCSI pointer
scsi: iscsi: Stop using the SCSI pointer
scsi: imm: Move the SCSI pointer to private command data
scsi: hptiop: Stop using the SCSI pointer
scsi: fnic: Stop using the SCSI pointer
scsi: fnic: Fix a tracing statement
scsi: fdomain: Move the SCSI pointer to private command data
scsi: esp_scsi: Stop using the SCSI pointer
scsi: dc395x: Stop using the SCSI pointer
scsi: csio: Stop using the SCSI pointer
scsi: bfa: Stop using the SCSI pointer
scsi: aha152x: Move the SCSI pointer to private command data
scsi: aha1542: Remove a set-but-not-used array
scsi: advansys: Move the SCSI pointer to private command data
scsi: aacraid: Move the SCSI pointer to private command data
scsi: 53c700: Stop clearing SCSI pointer fields
scsi: arm: Move the SCSI pointer to private command data
scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h
scsi: NCR5380: Remove the NCR5380_CMD_SIZE macro
scsi: Remove drivers/scsi/scsi.h
scsi: nsp_cs: Use true and false instead of TRUE and FALSE
scsi: nsp_cs: Change the return type of two functions into 'void'
scsi: ips: Use true and false instead of TRUE and FALSE
scsi: ips: Change the return type of ips_release() into 'void'
scsi: ips: Remove an unreachable statement
Bikash Hazarika (1):
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter
Cai Huoqing (1):
scsi: bnx2fc: Fix typo in comments
Changcheng Deng (1):
scsi: qla4xxx: Remove unneeded variable
Christoph Hellwig (15):
scsi: core: Remove <scsi/scsi_request.h>
scsi: core: Remove struct scsi_request
scsi: core: Move the result field from struct scsi_request to struct scsi_cmnd
scsi: core: Move the resid_len field from struct scsi_request to struct scsi_cmnd
scsi: core: Remove the sense and sense_len fields from struct scsi_request
scsi: core: Remove the cmd field from struct scsi_request
scsi: core: Don't memset() the entire scsi_cmnd in scsi_init_command()
scsi: target: pscsi: Remove struct pscsi_plugin_task
scsi: block: Remove REQ_OP_WRITE_SAME support
scsi: dm: Remove WRITE_SAME support
scsi: md: Remove WRITE_SAME support
scsi: sd: Remove WRITE_SAME support
scsi: rnbd: Remove WRITE_SAME support
scsi: drbd: Remove WRITE_SAME support
scsi: cxlflash: Query write_zeroes limit for zeroing
Christophe JAILLET (1):
scsi: message: fusion: Use GFP_KERNEL instead of GFP_ATOMIC in non-atomic context
Damien Le Moal (34):
scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()
scsi: scsi_debug: Silence unexpected unlock warnings
scsi: libsas: Clean up sas_form_port()
scsi: pm8001: Fix pm8001_info() message format
scsi: pm8001: Improve pm80XX_send_abort_all()
scsi: pm8001: Simplify pm8001_ccb_task_free()
scsi: pm8001: Simplify pm8001_task_exec()
scsi: pm8001: Simplify pm8001_mpi_build_cmd() interface
scsi: pm8001: Introduce ccb alloc/free helpers
scsi: pm8001: Simplify pm8001_get_ncq_tag()
scsi: pm8001: Cleanup pm8001_exec_internal_task_abort()
scsi: libsas: Simplify sas_ata_qc_issue() detection of NCQ commands
scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()
scsi: pm8001: Fix tag leaks on error
scsi: pm8001: Fix task leak in pm8001_send_abort_all()
scsi: pm8001: Fix tag values handling
scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
scsi: pm8001: Fix pm8001_tag_alloc() failures handling
scsi: pm8001: Fix abort all task initialization
scsi: pm8001: Fix NCQ NON DATA command completion handling
scsi: pm8001: Fix NCQ NON DATA command task initialization
scsi: pm8001: Remove local variable in pm8001_pci_resume()
scsi: pm8001: Fix use of struct set_phy_profile_req fields
scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()
scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()
scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()
scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()
scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
scsi: pm8001: Fix pm80xx_pci_mem_copy() interface
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
scsi: pm8001: Fix pm8001_update_flash() local variable type
scsi: pm8001: Fix __iomem pointer use in pm8001_phy_control()
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
Daniel Wagner (1):
scsi: qla2xxx: Refactor asynchronous command initialization
Don Brace (4):
scsi: smartpqi: Fix unused variable pqi_pm_ops for clang
scsi: smartpqi: Update version to 2.1.14-035
scsi: smartpqi: Add PCI IDs
scsi: smartpqi: Fix rmmod stack trace
Douglas Gilbert (7):
scsi: scsi_debug: Add environmental reporting log subpage
scsi: scsi_debug: Add no_rwlock parameter
scsi: scsi_debug: Divide power on reset UNIT ATTENTION
scsi: scsi_debug: Refine sdebug_blk_mq_poll()
scsi: scsi_debug: Use TASK SET FULL more
scsi: scsi_debug: Strengthen defer_t accesses
scsi: scsi_debug: Address races following module load
Finn Thain (3):
scsi: mac53c94: Stop using struct scsi_pointer
scsi: mesh: Stop using struct scsi_pointer
scsi: NCR5380: Add SCp members to struct NCR5380_cmd
Gilbert Wu (1):
scsi: smartpqi: Enable SATA NCQ priority in sysfs
Gleb Chesnokov (3):
scsi: qla2xxx: Use named initializers for q_dev_state
scsi: qla2xxx: Use named initializers for port_[d]state_str
scsi: qla2xxx: Remove unused qla_sess_op_cmd_list from scsi_qla_host_t
Guixin Liu (1):
scsi: target: tcmu: Make cmd_ring_size changeable via configfs
Gustavo A. R. Silva (1):
scsi: libfc: Replace one-element arrays with flexible-array members
Hannes Reinecke (5):
scsi: lpfc: Use rport as argument for lpfc_chk_tgt_mapped()
scsi: lpfc: Use rport as argument for lpfc_send_taskmgmt()
scsi: lpfc: Use fc_block_rport()
scsi: lpfc: Drop lpfc_no_handler()
scsi: lpfc: Kill lpfc_bus_reset_handler()
James Smart (19):
scsi: lpfc: Copyright updates for 14.2.0.0 patches
scsi: lpfc: Update lpfc version to 14.2.0.0
scsi: lpfc: SLI path split: Refactor BSG paths
scsi: lpfc: SLI path split: Refactor Abort paths
scsi: lpfc: SLI path split: Refactor SCSI paths
scsi: lpfc: SLI path split: Refactor CT paths
scsi: lpfc: SLI path split: Refactor misc ELS paths
scsi: lpfc: SLI path split: Refactor VMID paths
scsi: lpfc: SLI path split: Refactor FDISC paths
scsi: lpfc: SLI path split: Refactor LS_RJT paths
scsi: lpfc: SLI path split: Refactor LS_ACC paths
scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths
scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths
scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path
scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe
scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4
scsi: lpfc: SLI path split: Refactor lpfc_iocbq
scsi: lpfc: Remove failing soft_wwn support
scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters
Jianglei Nie (1):
scsi: libfc: Fix use after free in fc_exch_abts_resp()
Jiapeng Chong (1):
scsi: aacraid: Clean up some inconsistent indenting
Jinyoung Choi (1):
scsi: ufs: Add checking lifetime attribute for WriteBooster
Joe Carnuccio (3):
scsi: qla2xxx: Check for firmware dump already collected
scsi: qla2xxx: Add devids and conditionals for 28xx
scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
John Garry (26):
scsi: hisi_sas: Use libsas internal abort support
scsi: pm8001: Use libsas internal abort support
scsi: libsas: Add sas_execute_internal_abort_dev()
scsi: libsas: Add sas_execute_internal_abort_single()
scsi: libsas: Use bool for queue_work() return code
scsi: libsas: Make sas_notify_{phy,port}_event() return void
scsi: libsas: Add sas_execute_ata_cmd()
scsi: libsas: Add sas_abort_task()
scsi: libsas: Add sas_query_task()
scsi: libsas: Add sas_lu_reset()
scsi: libsas: Add sas_clear_task_set()
scsi: libsas: Add sas_abort_task_set()
scsi: libsas: Add TMF handler aborted callback
scsi: libsas: Add TMF handler exec complete callback
scsi: libsas: Add sas_execute_ssp_tmf()
scsi: libsas: Add sas_execute_tmf()
scsi: libsas: Add sas_task.tmf
scsi: libsas: Add struct sas_tmf_task
scsi: libsas: Move SMP task handlers to core
scsi: hisi_sas: Delete unused I_T_NEXUS_RESET_PHYUP_TIMEOUT
scsi: libsas: Delete SAS_SG_ERR
scsi: libsas: Delete lldd_clear_aca callback
scsi: libsas: Use enum for response frame DATAPRES field
scsi: libsas: Handle non-TMF codes in sas_scsi_find_task()
scsi: libsas: Drop SAS_TASK_AT_INITIATOR
scsi: isci: Drop SAS_TASK_AT_INITIATOR check in isci_task_abort_task()
Julia Lawall (6):
scsi: lpfc: Use kcalloc()
scsi: aic7xxx: Fix typos in comments
scsi: qla2xxx: Fix typos in comments
scsi: elx: libefc_sli: Fix typos in comments
scsi: lpfc: Fix typos in comments
scsi: message: fusion: Use GFP_KERNEL
Kees Cook (2):
scsi: ibmvscsis: Silence -Warray-bounds warning
scsi: mpt3sas: Convert to flexible arrays
Keoseong Park (1):
scsi: ufs: core: Remove wlun_dev_to_hba()
Kevin Barnett (5):
scsi: smartpqi: Fix lsscsi -t SAS addresses
scsi: smartpqi: Fix hibernate and suspend
scsi: smartpqi: Expose SAS address for SATA drives
scsi: smartpqi: Fix a typo in func pqi_aio_submit_io()
scsi: smartpqi: Fix a name typo and cleanup code
Khazhismel Kumykov (1):
scsi: core: docs: Update notes about scsi_times_out
Lukas Bulwahn (2):
scsi: scsi_ioctl: Drop needless assignment in sg_io()
scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn()
Mahesh Rajashekhara (2):
scsi: smartpqi: Fix kdump issue when controller is locked up
scsi: smartpqi: Update volume size after expansion
Manish Rangankar (1):
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
Martin Wilck (1):
scsi: core: Make "access_state" sysfs attribute always visible
Mike Christie (6):
scsi: iscsi: Drop temp workq_name
scsi: iscsi: Use the session workqueue for recovery
scsi: iscsi: ql4xxx: Use per-session workqueue for unbinding
scsi: iscsi: Remove iscsi_scan_finished()
scsi: iscsi: Speed up session unblocking and removal
scsi: iscsi: Fix recovery and unblocking race
Mike McGowen (3):
scsi: smartpqi: Fix BUILD_BUG_ON() statements
scsi: smartpqi: Fix NUMA node not updated during init
scsi: smartpqi: Speed up RAID 10 sequential reads
Minghao Chi (CGEL ZTE) (2):
scsi: lpfc: Remove redundant flush_workqueue() call
scsi: qedi: Remove redundant flush_workqueue() calls
Mingzhe Zou (1):
scsi: target: Add iscsi/cpus_allowed_list in configfs
Murthy Bhat (1):
scsi: smartpqi: Quickly propagate path failures to SCSI midlayer
Nilesh Javali (3):
scsi: qla2xxx: Update version to 10.02.07.400-k
scsi: qla2xxx: Update version to 10.02.07.300-k
scsi: qla2xxx: Fix warning for missing error code
Peter Wang (1):
scsi: ufs: core: scsi_get_lba() error fix
Qi Liu (2):
scsi: hisi_sas: Rename error labels in hisi_sas_v3_probe()
scsi: hisi_sas: Free irq vectors in order for v3 HW
Quinn Tran (13):
scsi: qla2xxx: Fix stuck session of PRLI reject
scsi: qla2xxx: Reduce false trigger to login
scsi: qla2xxx: Fix laggy FC remote port session recovery
scsi: qla2xxx: Fix hang due to session stuck
scsi: qla2xxx: Fix N2N inconsistent PLOGI
scsi: qla2xxx: Fix disk failure to rediscover
scsi: qla2xxx: Fix incorrect reporting of task management failure
scsi: qla2xxx: edif: Fix clang warning
scsi: qla2xxx: Add retry for exec firmware
scsi: qla2xxx: Fix scheduling while atomic
scsi: qla2xxx: Fix premature hw access after PCI error
scsi: qla2xxx: Fix warning message due to adisc being flushed
scsi: qla2xxx: Fix stuck session in gpdb
Randy Dunlap (2):
scsi: ufs: docs: UFS documentation corrections
scsi: aha152x: Fix aha152x_setup() __setup handler return value
Sagar Biradar (2):
scsi: smartpqi: Avoid drive spin-down during suspend
scsi: smartpqi: Eliminate drive spin down on warm boot
Saurav Kashyap (3):
scsi: qla2xxx: Add qla2x00_async_done() for async routines
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
scsi: qla2xxx: Implement ref count for SRB
Sebastian Andrzej Siewior (2):
scsi: usb: storage: Complete the SCSI request directly
scsi: core: Add scsi_done_direct() for immediate completion
Shreyas Deodhar (2):
scsi: qla2xxx: Increase max limit of ql2xnvme_queues
scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues
Sreekanth Reddy (12):
scsi: mpt3sas: Fix incorrect 4GB boundary check
scsi: mpt3sas: Remove scsi_dma_map() error messages
scsi: mpi3mr: Fix flushing !WQ_MEM_RECLAIM events warning
scsi: mpi3mr: Bump driver version to 8.0.0.68.0
scsi: mpi3mr: Fix memory leaks
scsi: mpi3mr: Update the copyright year
scsi: mpi3mr: Fix reporting of actual data transfer size
scsi: mpi3mr: Fix cmnd getting marked as in use forever
scsi: mpi3mr: Fix hibernation issue
scsi: mpi3mr: Update MPI3 headers
scsi: mpi3mr: Fix printing of pending I/O count
scsi: mpi3mr: Fix deadlock while canceling the fw event
Wenchao Hao (3):
scsi: libiscsi: Teardown iscsi_cls_conn gracefully
scsi: libiscsi: Add iscsi_cls_conn to sysfs after initialization
scsi: iscsi: Add helper functions to manage iscsi_cls_conn
Xiang Chen (7):
scsi: hisi_sas: Limit users changing debugfs BIST count value
scsi: hisi_sas: Change hisi_sas_control_phy() phyup timeout
scsi: hisi_sas: Change permission of parameter prot_mask
scsi: Remove unused member cmd_pool for structure scsi_host_template
scsi: libsas: Remove unused parameter for function sas_ata_eh()
scsi: libsas: Remove duplicated setting for task->task_state_flags
scsi: libsas: Use void for sas_discover_event() return code
Xingui Yang (1):
scsi: hisi_sas: Modify v3 HW SSP underflow error processing
Yang Guang (2):
scsi: bfa: Replace snprintf() with sysfs_emit()
scsi: mvsas: Replace snprintf() with sysfs_emit()
Yang Li (4):
scsi: core: Remove unreachable code warning
scsi: megasas: Clean up some inconsistent indenting
scsi: hisi_sas: Remove unnecessary print function dev_err()
scsi: pm8001: Clean up inconsistent indenting
Yin Xiujiang (1):
scsi: bnx2fc: Make use of the helper macro kthread_run()
Zheyu Ma (1):
scsi: wd719x: Return proper error code when dma_set_mask() fails
And the diffstat:
Documentation/scsi/libsas.rst | 2 -
Documentation/scsi/scsi_eh.rst | 15 +-
Documentation/scsi/ufs.rst | 70 +-
block/blk-core.c | 13 +-
block/blk-lib.c | 93 -
block/blk-merge.c | 40 -
block/blk-settings.c | 16 -
block/blk-sysfs.c | 3 +-
block/blk-zoned.c | 1 -
block/blk.h | 1 -
block/bounce.c | 3 -
drivers/ata/libata-scsi.c | 4 +-
drivers/block/drbd/drbd_main.c | 31 +-
drivers/block/drbd/drbd_nl.c | 72 +-
drivers/block/drbd/drbd_receiver.c | 47 +-
drivers/block/drbd/drbd_req.c | 1 -
drivers/block/drbd/drbd_worker.c | 5 -
drivers/block/pktcdvd.c | 8 +-
drivers/block/rnbd/rnbd-clt.c | 7 +-
drivers/block/rnbd/rnbd-clt.h | 1 -
drivers/block/rnbd/rnbd-proto.h | 6 -
drivers/block/rnbd/rnbd-srv.c | 3 +-
drivers/cdrom/cdrom.c | 1 -
drivers/infiniband/ulp/iser/iscsi_iser.c | 1 +
drivers/md/dm-core.h | 1 -
drivers/md/dm-crypt.c | 1 -
drivers/md/dm-ebs-target.c | 1 -
drivers/md/dm-io.c | 22 +-
drivers/md/dm-linear.c | 1 -
drivers/md/dm-mpath.c | 1 -
drivers/md/dm-rq.c | 3 -
drivers/md/dm-stripe.c | 4 +-
drivers/md/dm-table.c | 29 -
drivers/md/dm-zone.c | 4 -
drivers/md/dm.c | 15 -
drivers/md/md-linear.c | 1 -
drivers/md/md-multipath.c | 1 -
drivers/md/md.h | 7 -
drivers/md/raid0.c | 2 -
drivers/md/raid1.c | 4 +-
drivers/md/raid10.c | 1 -
drivers/md/raid5.c | 1 -
drivers/message/fusion/mptsas.c | 2 +-
drivers/message/fusion/mptspi.c | 2 +-
drivers/scsi/53c700.c | 2 -
drivers/scsi/NCR5380.c | 94 +-
drivers/scsi/NCR5380.h | 13 +-
drivers/scsi/a2091.c | 25 +-
drivers/scsi/a3000.c | 25 +-
drivers/scsi/aacraid/aachba.c | 43 +-
drivers/scsi/aacraid/aacraid.h | 24 +-
drivers/scsi/aacraid/comminit.c | 2 +-
drivers/scsi/aacraid/linit.c | 23 +-
drivers/scsi/advansys.c | 22 +-
drivers/scsi/aha152x.c | 274 ++-
drivers/scsi/aha1542.c | 3 +-
drivers/scsi/aha1740.c | 6 +-
drivers/scsi/aic7xxx/aicasm/aicasm.c | 2 +-
drivers/scsi/aic94xx/aic94xx.h | 1 -
drivers/scsi/aic94xx/aic94xx_init.c | 1 -
drivers/scsi/aic94xx/aic94xx_task.c | 9 -
drivers/scsi/aic94xx/aic94xx_tmf.c | 11 +-
drivers/scsi/arm/acornscsi.c | 28 +-
drivers/scsi/arm/{scsi.h => arm_scsi.h} | 37 +-
drivers/scsi/arm/arxescsi.c | 6 +-
drivers/scsi/arm/cumana_1.c | 2 +-
drivers/scsi/arm/cumana_2.c | 8 +-
drivers/scsi/arm/eesox.c | 8 +-
drivers/scsi/arm/fas216.c | 36 +-
drivers/scsi/arm/fas216.h | 4 +
drivers/scsi/arm/oak.c | 2 +-
drivers/scsi/arm/powertec.c | 8 +-
drivers/scsi/arm/queue.c | 6 +-
drivers/scsi/atari_scsi.c | 6 +-
drivers/scsi/be2iscsi/be_main.c | 3 +-
drivers/scsi/bfa/bfad_attr.c | 26 +-
drivers/scsi/bfa/bfad_im.c | 27 +-
drivers/scsi/bfa/bfad_im.h | 16 +
drivers/scsi/bnx2fc/bnx2fc.h | 9 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 8 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 23 +-
drivers/scsi/bnx2fc/bnx2fc_tgt.c | 2 +-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 1 +
drivers/scsi/csiostor/csio_scsi.c | 20 +-
drivers/scsi/csiostor/csio_scsi.h | 10 +
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 1 +
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 1 +
drivers/scsi/cxlflash/vlun.c | 4 +-
drivers/scsi/dc395x.c | 3 -
drivers/scsi/dmx3191d.c | 2 +-
drivers/scsi/elx/libefc_sli/sli4.c | 2 +-
drivers/scsi/esp_scsi.c | 4 +-
drivers/scsi/esp_scsi.h | 3 +-
drivers/scsi/fcoe/fcoe.c | 1 +
drivers/scsi/fdomain.c | 64 +-
drivers/scsi/fnic/fnic.h | 27 +-
drivers/scsi/fnic/fnic_main.c | 1 +
drivers/scsi/fnic/fnic_scsi.c | 289 ++-
drivers/scsi/g_NCR5380.c | 6 +-
drivers/scsi/gvp11.c | 25 +-
drivers/scsi/hisi_sas/hisi_sas.h | 19 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 689 ++-----
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 20 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 23 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 150 +-
drivers/scsi/hptiop.c | 1 +
drivers/scsi/hptiop.h | 4 +-
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 9 +-
drivers/scsi/imm.c | 88 +-
drivers/scsi/imm.h | 5 +
drivers/scsi/initio.c | 14 +-
drivers/scsi/initio.h | 9 +
drivers/scsi/ips.c | 52 +-
drivers/scsi/isci/init.c | 1 -
drivers/scsi/isci/request.c | 22 +-
drivers/scsi/isci/request.h | 5 +-
drivers/scsi/isci/task.c | 41 +-
drivers/scsi/isci/task.h | 4 -
drivers/scsi/iscsi_tcp.c | 1 +
drivers/scsi/libfc/fc_encode.h | 2 +-
drivers/scsi/libfc/fc_exch.c | 1 +
drivers/scsi/libfc/fc_fcp.c | 26 +-
drivers/scsi/libiscsi.c | 49 +-
drivers/scsi/libsas/sas_ata.c | 25 +-
drivers/scsi/libsas/sas_discover.c | 6 +-
drivers/scsi/libsas/sas_event.c | 50 +-
drivers/scsi/libsas/sas_expander.c | 24 +-
drivers/scsi/libsas/sas_internal.h | 10 +-
drivers/scsi/libsas/sas_port.c | 73 +-
drivers/scsi/libsas/sas_scsi_host.c | 320 ++-
drivers/scsi/libsas/sas_task.c | 14 +-
drivers/scsi/lpfc/lpfc.h | 101 +-
drivers/scsi/lpfc/lpfc_attr.c | 228 ---
drivers/scsi/lpfc/lpfc_bsg.c | 349 ++--
drivers/scsi/lpfc/lpfc_crtn.h | 22 +-
drivers/scsi/lpfc/lpfc_ct.c | 346 ++--
drivers/scsi/lpfc/lpfc_debugfs.c | 9 +-
drivers/scsi/lpfc/lpfc_els.c | 1513 ++++++++------
drivers/scsi/lpfc/lpfc_hbadisc.c | 46 +-
drivers/scsi/lpfc/lpfc_hw.h | 16 +-
drivers/scsi/lpfc/lpfc_hw4.h | 38 +-
drivers/scsi/lpfc/lpfc_init.c | 26 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 104 +-
drivers/scsi/lpfc/lpfc_nvme.c | 41 +-
drivers/scsi/lpfc/lpfc_nvme.h | 8 +-
drivers/scsi/lpfc/lpfc_nvmet.c | 85 +-
drivers/scsi/lpfc/lpfc_scsi.c | 598 +++---
drivers/scsi/lpfc/lpfc_sli.c | 2831 ++++++++++++--------------
drivers/scsi/lpfc/lpfc_sli.h | 31 +-
drivers/scsi/lpfc/lpfc_sli4.h | 2 +-
drivers/scsi/lpfc/lpfc_version.h | 6 +-
drivers/scsi/mac53c94.c | 26 +-
drivers/scsi/mac53c94.h | 11 +
drivers/scsi/mac_scsi.c | 9 +-
drivers/scsi/megaraid.c | 21 +-
drivers/scsi/megaraid.h | 23 +-
drivers/scsi/megaraid/megaraid_sas.h | 12 +
drivers/scsi/megaraid/megaraid_sas_base.c | 8 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 19 +-
drivers/scsi/mesh.c | 19 +-
drivers/scsi/mesh.h | 11 +
drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 122 +-
drivers/scsi/mpi3mr/mpi/mpi30_init.h | 3 +
drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 46 +-
drivers/scsi/mpi3mr/mpi/mpi30_pci.h | 3 +-
drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 8 +-
drivers/scsi/mpi3mr/mpi3mr.h | 10 +-
drivers/scsi/mpi3mr/mpi3mr_debug.h | 2 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 12 +-
drivers/scsi/mpi3mr/mpi3mr_os.c | 161 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 6 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 43 +-
drivers/scsi/mvme147.c | 16 +-
drivers/scsi/mvsas/mv_defs.h | 5 -
drivers/scsi/mvsas/mv_init.c | 15 +-
drivers/scsi/mvsas/mv_sas.c | 185 +-
drivers/scsi/mvsas/mv_sas.h | 3 -
drivers/scsi/mvumi.c | 9 +-
drivers/scsi/mvumi.h | 9 +
drivers/scsi/ncr53c8xx.c | 22 +-
drivers/scsi/ncr53c8xx.h | 6 +
drivers/scsi/nsp32.c | 20 +-
drivers/scsi/nsp32.h | 9 +
drivers/scsi/pcmcia/aha152x_stub.c | 9 +-
drivers/scsi/pcmcia/nsp_cs.c | 246 +--
drivers/scsi/pcmcia/nsp_cs.h | 8 +-
drivers/scsi/pcmcia/nsp_debug.c | 2 +-
drivers/scsi/pcmcia/qlogic_stub.c | 9 +-
drivers/scsi/pcmcia/sym53c500_cs.c | 47 +-
drivers/scsi/pm8001/pm8001_ctl.c | 66 +-
drivers/scsi/pm8001/pm8001_hwi.c | 496 ++---
drivers/scsi/pm8001/pm8001_hwi.h | 5 -
drivers/scsi/pm8001/pm8001_init.c | 16 +-
drivers/scsi/pm8001/pm8001_sas.c | 577 ++----
drivers/scsi/pm8001/pm8001_sas.h | 86 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 500 +++--
drivers/scsi/pm8001/pm80xx_hwi.h | 16 +-
drivers/scsi/ppa.c | 75 +-
drivers/scsi/qedf/qedf.h | 10 +-
drivers/scsi/qedf/qedf_io.c | 25 +-
drivers/scsi/qedf/qedf_main.c | 3 +-
drivers/scsi/qedi/qedi_fw.c | 4 +-
drivers/scsi/qedi/qedi_iscsi.c | 1 +
drivers/scsi/qedi/qedi_main.c | 2 -
drivers/scsi/qla1280.c | 21 +-
drivers/scsi/qla1280.h | 3 +-
drivers/scsi/qla2xxx/qla_attr.c | 7 +-
drivers/scsi/qla2xxx/qla_bsg.c | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 60 +-
drivers/scsi/qla2xxx/qla_edif.c | 25 +-
drivers/scsi/qla2xxx/qla_gbl.h | 7 +-
drivers/scsi/qla2xxx/qla_gs.c | 162 +-
drivers/scsi/qla2xxx/qla_init.c | 261 +--
drivers/scsi/qla2xxx/qla_inline.h | 2 +
drivers/scsi/qla2xxx/qla_iocb.c | 93 +-
drivers/scsi/qla2xxx/qla_isr.c | 11 +-
drivers/scsi/qla2xxx/qla_mbx.c | 37 +-
drivers/scsi/qla2xxx/qla_mid.c | 9 +-
drivers/scsi/qla2xxx/qla_mr.c | 11 +-
drivers/scsi/qla2xxx/qla_nvme.c | 71 +-
drivers/scsi/qla2xxx/qla_nvme.h | 3 +
drivers/scsi/qla2xxx/qla_nx.c | 35 +-
drivers/scsi/qla2xxx/qla_nx.h | 20 +-
drivers/scsi/qla2xxx/qla_nx2.c | 9 +-
drivers/scsi/qla2xxx/qla_os.c | 75 +-
drivers/scsi/qla2xxx/qla_sup.c | 4 +-
drivers/scsi/qla2xxx/qla_target.c | 34 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 9 +-
drivers/scsi/qla2xxx/qla_version.h | 4 +-
drivers/scsi/qla4xxx/ql4_def.h | 16 +-
drivers/scsi/qla4xxx/ql4_os.c | 18 +-
drivers/scsi/qlogicfas.c | 6 +-
drivers/scsi/qlogicfas408.c | 6 +-
drivers/scsi/scsi.h | 46 -
drivers/scsi/scsi_bsg.c | 43 +-
drivers/scsi/scsi_debug.c | 488 +++--
drivers/scsi/scsi_debugfs.c | 6 +-
drivers/scsi/scsi_error.c | 49 +-
drivers/scsi/scsi_ioctl.c | 77 +-
drivers/scsi/scsi_lib.c | 139 +-
drivers/scsi/scsi_logging.c | 5 +-
drivers/scsi/scsi_sysfs.c | 8 -
drivers/scsi/scsi_transport_fc.c | 39 +-
drivers/scsi/scsi_transport_iscsi.c | 184 +-
drivers/scsi/scsi_transport_sas.c | 1 -
drivers/scsi/sd.c | 109 +-
drivers/scsi/sd_zbc.c | 2 -
drivers/scsi/sg.c | 52 +-
drivers/scsi/sgiwd93.c | 24 +-
drivers/scsi/smartpqi/smartpqi.h | 16 +-
drivers/scsi/smartpqi/smartpqi_init.c | 559 +++--
drivers/scsi/smartpqi/smartpqi_sis.c | 10 +-
drivers/scsi/smartpqi/smartpqi_sis.h | 1 +
drivers/scsi/sr.c | 30 +-
drivers/scsi/st.c | 30 +-
drivers/scsi/sun3_scsi.c | 4 +-
drivers/scsi/sym53c8xx_2/sym_glue.c | 4 +-
drivers/scsi/ufs/ufs.h | 6 +
drivers/scsi/ufs/ufshcd.c | 80 +-
drivers/scsi/ufs/ufshpb.c | 22 +-
drivers/scsi/wd33c93.c | 119 +-
drivers/scsi/wd33c93.h | 4 +
drivers/scsi/wd719x.c | 15 +-
drivers/scsi/wd719x.h | 1 +
drivers/scsi/zalon.c | 1 +
drivers/target/iscsi/iscsi_target.c | 77 +-
drivers/target/iscsi/iscsi_target_configfs.c | 32 +
drivers/target/iscsi/iscsi_target_login.c | 8 +
drivers/target/target_core_pscsi.c | 67 +-
drivers/target/target_core_pscsi.h | 4 -
drivers/target/target_core_user.c | 73 +-
drivers/usb/image/microtek.c | 8 +-
drivers/usb/storage/cypress_atacb.c | 1 -
drivers/usb/storage/debug.c | 1 -
drivers/usb/storage/isd200.c | 4 +-
drivers/usb/storage/uas.c | 43 +-
drivers/usb/storage/usb.c | 2 +-
include/linux/bio.h | 3 -
include/linux/blk_types.h | 2 -
include/linux/blkdev.h | 19 -
include/linux/bsg-lib.h | 1 -
include/linux/device-mapper.h | 6 -
include/scsi/fc/fc_ms.h | 4 +-
include/scsi/libfc.h | 9 +
include/scsi/libiscsi.h | 13 +-
include/scsi/libsas.h | 56 +-
include/scsi/sas.h | 9 +
include/scsi/sas_ata.h | 14 +-
include/scsi/scsi_cmnd.h | 31 +-
include/scsi/scsi_device.h | 1 +
include/scsi/scsi_eh.h | 4 +-
include/scsi/scsi_host.h | 3 -
include/scsi/scsi_request.h | 31 -
include/scsi/scsi_transport_iscsi.h | 9 +-
include/scsi/viosrp.h | 17 +-
include/target/iscsi/iscsi_target_core.h | 31 +-
kernel/trace/blktrace.c | 1 -
298 files changed, 8536 insertions(+), 8339 deletions(-)
rename drivers/scsi/arm/{scsi.h => arm_scsi.h} (75%)
delete mode 100644 drivers/scsi/scsi.h
delete mode 100644 include/scsi/scsi_request.h
James
Powered by blists - more mailing lists