linux-kernel - Re: [PATCH v4] wcn36xx: Implement tx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 26 Mar 2022 10:50:30 +0200
From:   Kalle Valo <kvalo@...nel.org>
To:     Jeff Johnson <quic_jjohnson@...cinc.com>
Cc:     Edmond Gagnon <egagnon@...areup.com>,
        Benjamin Li <benl@...areup.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        <wcn36xx@...ts.infradead.org>, <linux-wireless@...r.kernel.org>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4] wcn36xx: Implement tx_rate reporting

Jeff Johnson <quic_jjohnson@...cinc.com> writes:

> On 3/25/2022 3:42 PM, Edmond Gagnon wrote:
>> Currently, the driver reports a tx_rate of 6.0 MBit/s no matter the true
>> rate:
>>
>> root@...aro-developer:~# iw wlan0 link
>> Connected to 6c:f3:7f:eb:9b:92 (on wlan0)
>>          SSID: SQ-DEVICETEST
>>          freq: 5200
>>          RX: 4141 bytes (32 packets)
>>          TX: 2082 bytes (15 packets)
>>          signal: -77 dBm
>>          rx bitrate: 135.0 MBit/s MCS 6 40MHz short GI
>>          tx bitrate: 6.0 MBit/s
>>
>>          bss flags:      short-slot-time
>>          dtim period:    1
>>          beacon int:     100
>>
>> This patch requests HAL_GLOBAL_CLASS_A_STATS_INFO via a hal_get_stats
>> firmware message and reports it via ieee80211_ops::sta_statistics.
>>
>> root@...aro-developer:~# iw wlan0 link
>> Connected to 6c:f3:7f:eb:73:b2 (on wlan0)
>>          SSID: SQ-DEVICETEST
>>          freq: 5700
>>          RX: 26788094 bytes (19859 packets)
>>          TX: 1101376 bytes (12119 packets)
>>          signal: -75 dBm
>>          rx bitrate: 135.0 MBit/s MCS 6 40MHz short GI
>>          tx bitrate: 108.0 MBit/s VHT-MCS 5 40MHz VHT-NSS 1
>>
>>          bss flags:      short-slot-time
>>          dtim period:    1
>>          beacon int:     100
>>
>> Tested on MSM8939 with WCN3680B running firmware CNSS-PR-2-0-1-2-c1-00083,
>> and verified by sniffing frames over the air with Wireshark to ensure the
>> MCS indices match.
>>
>> Signed-off-by: Edmond Gagnon <egagnon@...areup.com>
>> Reviewed-by: Benjamin Li <benl@...areup.com>

[...]

>>   +static void wcn36xx_sta_statistics(struct ieee80211_hw *hw,
>> struct ieee80211_vif *vif,
>> +				   struct ieee80211_sta *sta, struct station_info *sinfo)
>> +{
>> +	struct wcn36xx *wcn;
>> +	u8 sta_index;
>> +	int status = 0;
>
> remove initializer that is always overwritten

I can fix that in the pending branch, no need to resend because of this.

>>   +int wcn36xx_smd_get_stats(struct wcn36xx *wcn, u8 sta_index, u32
>> stats_mask,
>> +			  struct station_info *sinfo)
>> +{
>> +	struct wcn36xx_hal_stats_req_msg msg_body;
>> +	struct wcn36xx_hal_stats_rsp_msg *rsp;
>> +	void *rsp_body;
>> +	int ret = 0;
>
> remove initializer that is always overwritten before use

Ditto.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches