linux-kernel - [PATCH 0/3] Ensure Low period of SCL is correct

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 26 Mar 2022 10:22:26 +0000
From:   Lucas Tanure <tanure@...ux.com>
To:     Neil Armstrong <narmstrong@...libre.com>,
        Kevin Hilman <khilman@...libre.com>,
        Jerome Brunet <jbrunet@...libre.com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     linux-i2c@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Lucas Tanure <tanure@...ux.com>
Subject: [PATCH 0/3] Ensure Low period of SCL is correct

The default duty cycle of 33% is less than the required
by the I2C specs for the LOW period of the SCL clock.

So, for 100Khz or less, use 50%H/50%L duty cycle, and
for the clock above 100Khz, use 40%H/60%L duty cycle.
That ensures the low period of SCL is always more than
the minimum required by the specs at any given frequency.

Lucas Tanure (3):
  i2c: meson: Use _SHIFT and _MASK for register definitions
  i2c: meson: Use 50% duty cycle for I2C clock
  i2c: meson: Remove meson_i2c_data

 drivers/i2c/busses/i2c-meson.c | 104 ++++++++++++++++++---------------
 1 file changed, 56 insertions(+), 48 deletions(-)

-- 
2.35.1