linux-kernel - Kernel 5.16.11 r8169 ethernet module do not build

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <Yj8kj23N6ugwnpFY@fedora>
Date:   Sat, 26 Mar 2022 16:34:55 +0200
From:   Hatim Muhammed <hatimmohammed369@...il.com>
To:     linux-kernel@...r.kernel.org
Subject: Kernel 5.16.11 r8169 ethernet module do not build


Hello everyone

I'm Hatim, I use Ubuntu 20.4.3 Kernel 5.11
I downloaded kernel 5.16.11 and installed it as follow:

make defconfig
make
sudo make modules_install

and now I can't connect to Ethernet
I tried again (make defconfig => make => sudo make modules_install)
But before make, I (make menuconfig) and set r8169 to <M>
and tried again, But no, it did not build, there's no .ko file

Actually when I (lsmod) I see nothing, NO MODULES ARE LOADED
I'm must be a fool to think things will be easy, but why r8169 driver
refused to build?

Here are some diagnostics:

$ dmesg | grep -i eth
[ 1.000377] r8169 0000:01:00.0 eth0: RTL8168e/8111e, 9c:8e:99:47:c7:0d, XID 2c2,
IRQ 26
[ 1.000385] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx
checksumming: ko]
[ 1.538290] r8169 0000:01:00.0 eno1: renamed from eth0
[ 4.182471] RTL8211DN Gigabit Ethernet r8169-0-100:00: attached PHY driver
(mii_bus:phy_addr=r8169-0-100:00, irq=MAC)


$ ls ~/Desktop/Kernel/linux-5.16.11/drivers/net/ethernet/realtek

8139cp.c
8139too.o
Makefile atp.h
modules.order
r8169_firmware.c
r8169_firmware.o
r8169_main.o
r8169_phy_config.o
8139too.c
Kconfig atp.c
built-in.a
r8169.h
r8169_firmware.h
r8169_main.c
r8169_phy_config.c