[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJprWoxWwk5EWEfWdLquPR+2=u6V0-v1-+wHMHOk8HiEyNw@mail.gmail.com>
Date: Mon, 28 Mar 2022 19:43:53 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Krishna Manikandan <mkrishn@...eaurora.org>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Vinod Koul <vkoul@...nel.org>
Subject: Re: [PATCH] dt-bindings: display: msm: dsi: remove address/size cells
On Mon, 28 Mar 2022 at 18:30, Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
>
> The DSI node is not a bus and the children do not have unit addresses.
>
> Reported-by: Vinod Koul <vkoul@...nel.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
NAK.
DSI panels are children of the DSI device tree node with the reg = <0>; address.
This is the convention used by other platforms too (see e.g.
arch/arm64/boot/dts/freescale/imx8mq-evk.dts).
With the DSI split link it is possible to attach two panels to a
single DSI host, so addresses are necessary.
> ---
> .../bindings/display/msm/dsi-controller-main.yaml | 7 -------
> 1 file changed, 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> index 7095ec3c890d..57f238f72326 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -51,10 +51,6 @@ properties:
> phy-names:
> const: dsi
>
> - "#address-cells": true
> -
> - "#size-cells": true
> -
> syscon-sfpb:
> description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> $ref: "/schemas/types.yaml#/definitions/phandle"
> @@ -154,9 +150,6 @@ examples:
> reg = <0x0ae94000 0x400>;
> reg-names = "dsi_ctrl";
>
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> interrupt-parent = <&mdss>;
> interrupts = <4>;
>
> --
> 2.32.0
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists