Message-Id: <cover.1648499509.git.mchehab@kernel.org>
Date:   Mon, 28 Mar 2022 22:41:12 +0200
From:   Mauro Carvalho Chehab <mchehab@...nel.org>
To:     unlisted-recipients:; (no To-header on input)
Cc:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Michael Krufky <mkrufky@...uxtv.org>,
        linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: [PATCH 00/26] dvb-usb: use designated initializers

There are two DVB USB cores on media. The new one (dvb-usb-v2)
solves several problems with the previous one, but, unfortunately,
there are several drivers that weren't migrated yet.

One of the problems with dvb-usb is that, besides the common
DVB USB table, it also uses a per-device table which require
links to the USB ID table.

This is done, on most drivers, using a magic number, which is easy
to get outdated.

Rewrite the drivers in order to use an enum and use designated
initializers where needed.

This patch series was inspired on this patch:
  https://patchwork.kernel.org/project/linux-media/patch/20220326165909.506926-16-benni@stuerz.xyz/

While it would be nice to also change the tables to be const, this
is currently not possible, as a couple drivers that depend on the
dvb-usb struct depend on it to not be const.

Writing a patch series like that and making it properly referencing
the right entries is not fun. That's most drivers were never fixed.
So, I ended using a script to change it, adding several checks on
it, in order to avoid the risk of problems.

Even so, I needed to manually adjust some patches.

This is the used script:

<script>
#!/usr/bin/perl
use strict;
use warnings;
use Text::Tabs;
use File::Find;

my $usb_id_pre = "";
my $usb_id_end = "";

my %vid;
my %pid;

my %pid_count;

my $state = "pre";

sub out_ids()
{
	open OUT, "> include/media/dvb-usb-ids.h" or die;
	print OUT $usb_id_pre;
	foreach my $k(sort keys %vid) {
		my $ln = sprintf "#define USB_VID_%-31s %s\n", $k, $vid{$k};
		$ln = unexpand($ln);
		print OUT $ln;
	}

	print OUT "\n/* Product IDs */\n\n";
	foreach my $k(sort keys %pid) {
		my $ln = sprintf "#define USB_PID_%-39s %s\n", $k, $pid{$k};
		$ln = unexpand($ln);
		print OUT $ln;
	}
	print OUT $usb_id_end;
	close OUT;
}

my @enum;

sub validate_model($$)
{
	my $my_vid = $1;
	my $my_pid = $2;

	if (!$vid{$my_vid}) {
		print "$.# ERROR! VID: $my_vid\n";
		return "";
	}

	if (!$pid{$my_pid}) {
		print "$.# ERROR! PID: $my_pid\n";
		return "";
	}

	my $tmp_vid = $my_vid;
	$tmp_vid =~ s/_ELECTRONIC$//;
	$tmp_vid =~ s/_MICRO$//;
	$tmp_vid =~ s/_1$//;
	$tmp_vid =~ s/_2$//;
	$tmp_vid =~ s/_UNK$//;
	$tmp_vid =~ s/GTEK/GENIATECH/;

	# Change model name to be different
	my $model = $tmp_vid . "_" . $my_pid;

	return $my_pid if ($my_pid =~ /$tmp_vid[_]/ && !grep(/^$my_pid$/, @enum));

	print "NEW model: $model\n";

	# Add the new PID to include/media/dvb-usb-ids.h
	$pid{$model} = $pid{$my_pid};

	$pid_count{$my_pid}--;

	# Drop unused PIDs
	if (!$pid_count{$my_pid}) {
		delete ($pid{$my_pid});
		print "Drop: $my_pid\n";
	}

	return $model if (!grep(/^$model$/, @enum));

	print "$.# ERROR! Model $model aready exists\n";
	return "";
}

sub count_pid()
{
	my $file = $File::Find::name;

	return if (!($file =~ /[.][ch]/));

	open IN, $file or die "Can't open $file";
	while (<IN>) {
		if (/USB_PID_([\w\_]+)/) {
			$pid_count{$1}++;
			next;
		}
	}
	close IN;
}

open IN, "include/media/dvb-usb-ids.h" or die;
while (<IN>) {
	if (/#define\s+USB_VID_(\S+)\s+(\S+)/) {
		$state = "vid";
		$vid{$1} = $2;
#print "VID: $1 -> $2\n";
		next;
	}
	if (/#define\s+USB_PID_(\S+)\s+(\S+)/) {
		$state = "pid";
		$pid{$1} = $2;
#print "PID: $1 -> $2\n";
		next;
	}

	if ($state eq "pre") {
		$usb_id_pre .= $_;
	} elsif ($state eq "pid") {
		$usb_id_end .= $_;
	}
}
close IN;

find({wanted => \&count_pid, no_chdir => 1}, "drivers/media/usb/");


while (scalar @ARGV) {
	@enum = ();
	my @dev_id;


	my $usb_dev_id_table;
	my $out = "";
	my $should_write = 1;

	my $file = $ARGV[0];

	print "Processing $file...\n";

	open IN, $file or die "Can't open $1";

	my $entry = "";

	my $pos = 0;

	while (<IN>) {
		if (m/struct\s.*usb_device_id\s+([\w\_]+).*{/) {
			$usb_dev_id_table = $1;
		}
		if (!$usb_dev_id_table) {
			$out .= $_;
			next;
		}

		if (m,\/\*\s*(\d+)\s*\*\/,) {
			if ($1 != $pos) {
				printf "$.# ERROR! Count is wrong! Want %d, got %d\n", $pos, $1;
				$should_write = 0;
				last;
			}
		}

		$pos++ if (m/USB_DEVICE/);

		last if (m/^}\s*;/);

		$entry .= $_;
		next if (!(m/}\s*,/));

		if ($entry =~ m/USB_DEVICE\(USB_VID_([\w\_]+)\s*,\s*USB_PID_([\w\_]+)/) {
			my $my_vid = $1;
			my $my_pid = $2;

			my $model = validate_model($my_vid, $my_pid);
			if ($model eq "") {
				$should_write = 0;
				last;
			}

			push @enum, $model;
			push @dev_id, "DVB_USB_DEV($my_vid, $model)";
			print "DVB_USB_DEV($my_vid, $model)\n";
		}
		if ($entry =~ m/USB_DEVICE_VER\(USB_VID_([\w\_]+)\s*,\s*USB_PID_([\w\_]+)\s*,\s*(\w+)\s*,\s*(\w+)/) {
			my $my_vid = $1;
			my $my_pid = $2;
			my $lo = $3;
			my $hi = $4;

			my $model = validate_model($my_vid, $my_pid);
			if ($model eq "") {
				$should_write = 0;
				last;
			}

			push @enum, $model;
			push @dev_id, "DVB_USB_DEV_VER($my_vid, $model, $lo, $hi)";
			print "DVB_USB_DEV_VER($my_vid, $model, $lo, $hi)\n";
		}
		$entry = "";
	}

	if ($should_write && scalar(@enum) != $pos) {
		printf "ERROR! Count is wrong! Want %d, got %d\n", $pos, scalar(@enum);
		$should_write = 0;
	}

	if ($usb_dev_id_table && $should_write) {
		$out .= "enum {\n";
		for my $e (@enum) {
			$out .= "\t$e,\n";
		}
		$out .= "};\n\n";

		$out .= "static struct usb_device_id $usb_dev_id_table\[\] = {\n";
		for my $e (@dev_id) {
			$out .= "\t$e,\n";
		}
		$out .= "\t{ }\n";
		$out .= "};\n\n";

		my $start = 1;

		while (<IN>) {
			next if ($start && m/^$/);
			$start = 0;
			while (m/$usb_dev_id_table\[(\d+)\]/g) {
				my $i = $1;

				if ($1 > scalar @enum) {
					print "ERROR! $usb_dev_id_table element $1 doesn't exist!\n";
					$should_write = 0;
					last;
				}

				my $idx = $enum[$1];

				if (!(s,($usb_dev_id_table)\[$i\],$1\[$idx],g)) {
					print "ERROR! can't replace $1!\n";
					$should_write = 0;
					last;
				}
			}
			$out .= $_;
		}
		close IN;
	} else {
		while (<IN>) {
			$out .= $_;
		}
		print "\tunchanged\n";
		$should_write = 0;
	}

	if ($should_write || $file eq "include/media/dvb-usb-ids.h") {
		open OUT, ">$file" or die "Can't write on file $file";
		print OUT $out;
		close OUT;
		printf "\twrote\n";

		out_ids();
	}

	shift @ARGV;
}
</script>


Mauro Carvalho Chehab (26):
  media: dvb-usb-ids.h: sort entries
  media: dvb-usb: move USB IDs to dvb-usb-ids.h
  media: dvb-usb: vp702x: reference to usb ID table
  media: dvb-usb: Add helper macros for using USB VID/PID
  media: dvb-usb: a800: use an enum for the device number
  media: af9005: use the newer dvb-usb macros for USB device
  media: dvb-usb: az6027: use an enum for the device number
  media: cinergyT2-core: use the newer dvb-usb macros for USB device
  media: cxusb: use the newer dvb-usb macros for USB device
  media: digitv: use the newer dvb-usb macros for USB device
  media: dvb-usb: dtt200u: use an enum for the device number
  media: dtv5100: use the newer dvb-usb macros for USB device
  media: dw2102: use the newer dvb-usb macros for USB device
  media: dvb-usb: gp8psk: use an enum for the device number
  media: dvb-usb: m920x: use an enum for the device number
  media: dvb-usb: nova-t-usb2: use an enum for the device number
  media: dvb-usb: opera1: use an enum for the device number
  media: dvb-usb: pctv452e: use an enum for the device number
  media: technisat-usb2: use the newer dvb-usb macros for USB device
  media: dvb-usb: ttusb2: use an enum for the device number
  media: dvb-usb: umt-010: use an enum for the device number
  media: dvb-usb: vp702x: use an enum for the device number
  media: dvb-usb: vp7045: use an enum for the device number
  media: dvb-usb: dibusb-mb: use an enum for the device number
  media: dvb-usb: dibusb-mc: use an enum for the device number
  media: dvb-usb: dib0700_devices: use an enum for the device number

 drivers/media/usb/dvb-usb/a800.c            |  18 +-
 drivers/media/usb/dvb-usb/af9005.c          |  19 +-
 drivers/media/usb/dvb-usb/az6027.c          |  45 +-
 drivers/media/usb/dvb-usb/cinergyT2-core.c  |  10 +-
 drivers/media/usb/dvb-usb/cxusb.c           |  88 +--
 drivers/media/usb/dvb-usb/dib0700_devices.c | 428 +++++++------
 drivers/media/usb/dvb-usb/dibusb-mb.c       | 165 ++---
 drivers/media/usb/dvb-usb/dibusb-mc.c       |  88 +--
 drivers/media/usb/dvb-usb/digitv.c          |  13 +-
 drivers/media/usb/dvb-usb/dtt200u.c         |  56 +-
 drivers/media/usb/dvb-usb/dtv5100.c         |  11 +-
 drivers/media/usb/dvb-usb/dw2102.c          |  84 ++-
 drivers/media/usb/dvb-usb/gp8psk.c          |  36 +-
 drivers/media/usb/dvb-usb/m920x.c           |  51 +-
 drivers/media/usb/dvb-usb/nova-t-usb2.c     |  18 +-
 drivers/media/usb/dvb-usb/opera1.c          |  15 +-
 drivers/media/usb/dvb-usb/pctv452e.c        |  22 +-
 drivers/media/usb/dvb-usb/technisat-usb2.c  |  11 +-
 drivers/media/usb/dvb-usb/ttusb2.c          |  36 +-
 drivers/media/usb/dvb-usb/umt-010.c         |  18 +-
 drivers/media/usb/dvb-usb/vp702x.c          |  23 +-
 drivers/media/usb/dvb-usb/vp7045.c          |  28 +-
 include/media/dvb-usb-ids.h                 | 632 +++++++++++---------
 23 files changed, 1071 insertions(+), 844 deletions(-)

-- 
2.35.1

Powered by blists - more mailing lists