linux-kernel - Re: [PATCH v6 2/2] pwm: Add clock based PWM output driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220328105659.mg3pxbqynlufaq6z@pengutronix.de>
Date:   Mon, 28 Mar 2022 12:56:59 +0200
From:   Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
To:     Nikita Travkin <nikita@...n.ru>
Cc:     thierry.reding@...il.com, lee.jones@...aro.org, robh+dt@...nel.org,
        sboyd@...nel.org, krzk@...nel.org, linus.walleij@...aro.org,
        masneyb@...tation.org, sean.anderson@...o.com,
        linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht, kernel@...gutronix.de
Subject: Re: [PATCH v6 2/2] pwm: Add clock based PWM output driver

Hello,

just a few minor things left to criticize, see below.

On Sun, Feb 20, 2022 at 04:50:30PM +0500, Nikita Travkin wrote:
> Some systems have clocks exposed to external devices. If the clock
> controller supports duty-cycle configuration, such clocks can be used as
> pwm outputs. In fact PWM and CLK subsystems are interfaced with in a
> similar way and an "opposite" driver already exists (clk-pwm). Add a
> driver that would enable pwm devices to be used via clk subsystem.
> 
> Signed-off-by: Nikita Travkin <nikita@...n.ru>
> --
> 
> Changes in v2:
>  - Address Uwe's review comments:
>    - Round set clk rate up
>    - Add a description with limitations of the driver
>    - Disable and unprepare clock before removing pwmchip
> Changes in v3:
>  - Use 64bit version of div round up
>  - Address Uwe's review comments:
>    - Reword the limitations to avoid incorrect claims
>    - Move the clk_enabled flag assignment
>    - Drop unnecessary statements
> Changes in v5:
>  - add missed returns
> Changes in v6:
>  - Unprepare the clock on error
>  - Drop redundant limitations points
> ---
>  drivers/pwm/Kconfig   |  10 +++
>  drivers/pwm/Makefile  |   1 +
>  drivers/pwm/pwm-clk.c | 139 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 150 insertions(+)
>  create mode 100644 drivers/pwm/pwm-clk.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 21e3b05a5153..daa2491a4054 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -140,6 +140,16 @@ config PWM_BRCMSTB
>  	  To compile this driver as a module, choose M Here: the module
>  	  will be called pwm-brcmstb.c.
>  
> +config PWM_CLK
> +	tristate "Clock based PWM support"
> +	depends on HAVE_CLK || COMPILE_TEST

Can you really compile this driver if HAVE_CLK isn't available?

> +	help
> +	  Generic PWM framework driver for outputs that can be
> +	  muxed to clocks.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-clk.
> +
>  config PWM_CLPS711X
>  	tristate "CLPS711X PWM support"
>  	depends on ARCH_CLPS711X || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 708840b7fba8..4a860103c470 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
>  obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
>  obj-$(CONFIG_PWM_BERLIN)	+= pwm-berlin.o
>  obj-$(CONFIG_PWM_BRCMSTB)	+= pwm-brcmstb.o
> +obj-$(CONFIG_PWM_CLK)		+= pwm-clk.o
>  obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
>  obj-$(CONFIG_PWM_CRC)		+= pwm-crc.o
>  obj-$(CONFIG_PWM_CROS_EC)	+= pwm-cros-ec.o
> diff --git a/drivers/pwm/pwm-clk.c b/drivers/pwm/pwm-clk.c
> new file mode 100644
> index 000000000000..52c9923368cb
> --- /dev/null
> +++ b/drivers/pwm/pwm-clk.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Clock based PWM controller
> + *
> + * Copyright (c) 2021 Nikita Travkin <nikita@...n.ru>
> + *
> + * This is an "adapter" driver that allows PWM consumers to use
> + * system clocks with duty cycle control as PWM outputs.
> + *
> + * Limitations:
> + * - Due to the fact that exact behavior depends on the underlying
> + *   clock driver, various limitations are possible.
> + * - Underlying clock may not be able to give 0% or 100% duty cycle
> + *   (constant off or on), exact behavior will depend on the clock.
> + * - When the PWM is disabled, the clock will be disabled as well,
> + *   line state will depend on the clock.

 - The clk API doesn't expose the necessary calls to implement
   .get_state().

> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/math64.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/pwm.h>
> +
> +struct pwm_clk_chip {
> +	struct pwm_chip chip;
> +	struct clk *clk;
> +	bool clk_enabled;
> +};
> +
> +#define to_pwm_clk_chip(_chip) container_of(_chip, struct pwm_clk_chip, chip)
> +
> +static int pwm_clk_apply(struct pwm_chip *pwm_chip, struct pwm_device *pwm,
> +			 const struct pwm_state *state)
> +{
> +	struct pwm_clk_chip *chip = to_pwm_clk_chip(pwm_chip);

I'd prefer this was not called chip, as this is how struct pwm_chip
variables are called usually. My suggestion is:

	chip -> pcchip
	pwm_chip -> chip

Best regards
Uwe

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)