linux-kernel - [PATCH 5/6] arm64: dts: qcom: sm8250: move wcd938x node out of soc node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220328143035.519909-6-vkoul@kernel.org>
Date:   Mon, 28 Mar 2022 20:00:34 +0530
From:   Vinod Koul <vkoul@...nel.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     linux-arm-msm@...r.kernel.org, Vinod Koul <vkoul@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Andy Gross <agross@...nel.org>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 5/6] arm64: dts: qcom: sm8250: move wcd938x node out of soc node

The soc node expects all the nodes to have unit addresses. The wcd codec
node does not have that which causes warnings:

arch/arm64/boot/dts/qcom/sm8250-mtp.dts:631.17-648.4:
Warning (simple_bus_reg): /soc@...odec: missing or empty reg/ranges property

Move wcd node out of soc to fix this

Signed-off-by: Vinod Koul <vkoul@...nel.org>
---
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 40 ++++++++++++-------------
 1 file changed, 19 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index fb99cc2827c7..3876a94b49a9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -156,6 +156,25 @@ vreg_s6c_0p88: smpc6-regulator {
 		regulator-always-on;
 		vin-supply = <&vph_pwr>;
 	};
+
+	wcd938x: codec {
+		compatible = "qcom,wcd9380-codec";
+		#sound-dai-cells = <1>;
+		reset-gpios = <&tlmm 32 0>;
+		vdd-buck-supply = <&vreg_s4a_1p8>;
+		vdd-rxtx-supply = <&vreg_s4a_1p8>;
+		vdd-io-supply = <&vreg_s4a_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+	};
 };
 
 &adsp {
@@ -627,27 +646,6 @@ &slpi {
 	firmware-name = "qcom/sm8250/slpi.mbn";
 };
 
-&soc {
-	wcd938x: codec {
-		compatible = "qcom,wcd9380-codec";
-		#sound-dai-cells = <1>;
-		reset-gpios = <&tlmm 32 0>;
-		vdd-buck-supply = <&vreg_s4a_1p8>;
-		vdd-rxtx-supply = <&vreg_s4a_1p8>;
-		vdd-io-supply = <&vreg_s4a_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob>;
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-	};
-};
-
 &sound {
 	compatible = "qcom,sm8250-sndcard";
 	model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
-- 
2.34.1