| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220330190846.13997-4-wens@kernel.org>
Date: Thu, 31 Mar 2022 03:08:45 +0800
From: Chen-Yu Tsai <wens@...nel.org>
To: Javier Martinez Canillas <javierm@...hat.com>,
Maxime Ripard <mripard@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>
Cc: Chen-Yu Tsai <wens@...e.org>, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/4] drm: ssd130x: Support page addressing mode
From: Chen-Yu Tsai <wens@...e.org>
On the SINO WEALTH SH1106, which is mostly compatible with the SSD1306,
only the basic page addressing mode is supported. This addressing mode
is not as easy to use compared to the currently supported horizontal
addressing mode, as the page address has to be set prior to writing
out each page, and each page must be written out separately as a result.
Also, there is no way to force the column address to wrap around early,
thus the column address must also be reset for each page to be accurate.
Add support for this addressing mode, with a flag to choose it. This
flag is designed to be set from the device info data structure, but
can be extended to be explicitly forced on through a device tree
property if such a need arises.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
drivers/gpu/drm/solomon/ssd130x.c | 72 ++++++++++++++++++++++++++++---
drivers/gpu/drm/solomon/ssd130x.h | 2 +
2 files changed, 67 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index d08d86ef07bc..21040d8bf9d1 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -42,6 +42,8 @@
#define SSD130X_DATA 0x40
#define SSD130X_COMMAND 0x80
+#define SSD130X_PAGE_COL_START_LOW 0x00
+#define SSD130X_PAGE_COL_START_HIGH 0x10
#define SSD130X_SET_ADDRESS_MODE 0x20
#define SSD130X_SET_COL_RANGE 0x21
#define SSD130X_SET_PAGE_RANGE 0x22
@@ -61,6 +63,10 @@
#define SSD130X_SET_COM_PINS_CONFIG 0xda
#define SSD130X_SET_VCOMH 0xdb
+#define SSD130X_PAGE_COL_START_MASK GENMASK(3, 0)
+#define SSD130X_PAGE_COL_START_SET(val) FIELD_PREP(SSD130X_PAGE_COL_START_MASK, (val))
+#define SSD130X_START_PAGE_ADDRESS_MASK GENMASK(2, 0)
+#define SSD130X_START_PAGE_ADDRESS_SET(val) FIELD_PREP(SSD130X_START_PAGE_ADDRESS_MASK, (val))
#define SSD130X_SET_SEG_REMAP_MASK GENMASK(0, 0)
#define SSD130X_SET_SEG_REMAP_SET(val) FIELD_PREP(SSD130X_SET_SEG_REMAP_MASK, (val))
#define SSD130X_SET_COM_SCAN_DIR_MASK GENMASK(3, 3)
@@ -130,6 +136,7 @@ static int ssd130x_write_cmd(struct ssd130x_device *ssd130x, int count,
return ret;
}
+/* Set address range for horizontal/vertical addressing modes */
static int ssd130x_set_col_range(struct ssd130x_device *ssd130x,
u8 col_start, u8 cols)
{
@@ -166,6 +173,26 @@ static int ssd130x_set_page_range(struct ssd130x_device *ssd130x,
return 0;
}
+/* Set page and column start address for page addressing mode */
+static int ssd130x_set_page_pos(struct ssd130x_device *ssd130x,
+ u8 page_start, u8 col_start)
+{
+ int ret;
+ u32 page, col_low, col_high;
+
+ page = SSD130X_START_PAGE_ADDRESS |
+ SSD130X_START_PAGE_ADDRESS_SET(page_start);
+ col_low = SSD130X_PAGE_COL_START_LOW |
+ SSD130X_PAGE_COL_START_SET(col_start & 0xf);
+ col_high = SSD130X_PAGE_COL_START_HIGH |
+ SSD130X_PAGE_COL_START_SET((col_start >> 4) & 0xf);
+ ret = ssd130x_write_cmd(ssd130x, 3, page, col_low, col_high);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static int ssd130x_pwm_enable(struct ssd130x_device *ssd130x)
{
struct device *dev = ssd130x->dev;
@@ -342,6 +369,11 @@ static int ssd130x_init(struct ssd130x_device *ssd130x)
}
}
+ /* Switch to page addressing mode */
+ if (ssd130x->page_address_mode)
+ return ssd130x_write_cmd(ssd130x, 2, SSD130X_SET_ADDRESS_MODE,
+ SSD130X_SET_ADDRESS_MODE_PAGE);
+
/* Switch to horizontal addressing mode */
return ssd130x_write_cmd(ssd130x, 2, SSD130X_SET_ADDRESS_MODE,
SSD130X_SET_ADDRESS_MODE_HORIZONTAL);
@@ -393,13 +425,16 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, u8 *buf,
* (5) A4 B4 C4 D4 E4 F4 G4 H4
*/
- ret = ssd130x_set_col_range(ssd130x, ssd130x->col_offset + x, width);
- if (ret < 0)
- goto out_free;
+ if (!ssd130x->page_address_mode) {
+ /* Set address range for horizontal addressing mode */
+ ret = ssd130x_set_col_range(ssd130x, ssd130x->col_offset + x, width);
+ if (ret < 0)
+ goto out_free;
- ret = ssd130x_set_page_range(ssd130x, ssd130x->page_offset + y / 8, pages);
- if (ret < 0)
- goto out_free;
+ ret = ssd130x_set_page_range(ssd130x, ssd130x->page_offset + y / 8, pages);
+ if (ret < 0)
+ goto out_free;
+ }
for (i = y / 8; i < y / 8 + pages; i++) {
int m = 8;
@@ -418,9 +453,29 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, u8 *buf,
}
data_array[array_idx++] = data;
}
+
+ /*
+ * In page addressing mode, the start address needs to be reset,
+ * and each page then needs to be written out separately.
+ */
+ if (ssd130x->page_address_mode) {
+ ret = ssd130x_set_page_pos(ssd130x,
+ ssd130x->page_offset + i,
+ ssd130x->col_offset + x);
+ if (ret < 0)
+ goto out_free;
+
+ ret = ssd130x_write_data(ssd130x, data_array, width);
+ if (ret < 0)
+ goto out_free;
+
+ array_idx = 0;
+ }
}
- ret = ssd130x_write_data(ssd130x, data_array, width * pages);
+ /* Write out update in one go if we aren't using page addressing mode */
+ if (!ssd130x->page_address_mode)
+ ret = ssd130x_write_data(ssd130x, data_array, width * pages);
out_free:
kfree(data_array);
@@ -796,6 +851,9 @@ struct ssd130x_device *ssd130x_probe(struct device *dev, struct regmap *regmap)
ssd130x->regmap = regmap;
ssd130x->device_info = device_get_match_data(dev);
+ if (ssd130x->device_info->page_mode_only)
+ ssd130x->page_address_mode = 1;
+
ssd130x_parse_properties(ssd130x);
ret = ssd130x_get_resources(ssd130x);
diff --git a/drivers/gpu/drm/solomon/ssd130x.h b/drivers/gpu/drm/solomon/ssd130x.h
index cd21cdccb566..f5b062576fdf 100644
--- a/drivers/gpu/drm/solomon/ssd130x.h
+++ b/drivers/gpu/drm/solomon/ssd130x.h
@@ -24,6 +24,7 @@ struct ssd130x_deviceinfo {
u32 default_dclk_frq;
int need_pwm;
int need_chargepump;
+ bool page_mode_only;
};
struct ssd130x_device {
@@ -38,6 +39,7 @@ struct ssd130x_device {
const struct ssd130x_deviceinfo *device_info;
+ unsigned page_address_mode : 1;
unsigned area_color_enable : 1;
unsigned com_invdir : 1;
unsigned com_lrremap : 1;
--
2.34.1
Powered by blists - more mailing lists