[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACPK8Xfg1xV6Cwb2qhu3A7-Ladj6htr45s8ZFqwApTFj4Ab2tQ@mail.gmail.com>
Date: Thu, 31 Mar 2022 05:35:16 +0000
From: Joel Stanley <joel@....id.au>
To: Zev Weiss <zev@...ilderbeest.net>
Cc: OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Andrew Jeffery <andrew@...id.au>,
devicetree <devicetree@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
linux-aspeed <linux-aspeed@...ts.ozlabs.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] ARM: dts: aspeed: romed8hm3: Add lm25066 sense
resistor values
On Thu, 31 Mar 2022 at 02:24, Zev Weiss <zev@...ilderbeest.net> wrote:
>
> With this property set the sensor readings from these devices can now
> be calibrated properly.
>
> Signed-off-by: Zev Weiss <zev@...ilderbeest.net>
I guess:
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Reviewed-by: Joel Stanley <joel@....id.au>
I'll send some fixes in after -rc1.
> ---
> arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
> index e71ccfd1df63..572a43e57cac 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
> @@ -100,12 +100,14 @@ w83773g@4c {
> lm25066@40 {
> compatible = "lm25066";
> reg = <0x40>;
> + shunt-resistor-micro-ohms = <1000>;
> };
>
> /* 12VSB PMIC */
> lm25066@41 {
> compatible = "lm25066";
> reg = <0x41>;
> + shunt-resistor-micro-ohms = <10000>;
> };
> };
>
> --
> 2.35.1
>
Powered by blists - more mailing lists