| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220401214032.3738095-3-michael@walle.cc>
Date: Fri, 1 Apr 2022 23:40:30 +0200
From: Michael Walle <michael@...le.cc>
To: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Michael Walle <michael@...le.cc>
Subject: [PATCH v4 2/4] hwmon: (bt1-pvt) use generic polynomial functions
The polynomial calculation function was moved into lib/ to be able to
reuse it. Move over to this one.
Signed-off-by: Michael Walle <michael@...le.cc>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/hwmon/Kconfig | 1 +
drivers/hwmon/bt1-pvt.c | 50 +++++++++++------------------------------
2 files changed, 14 insertions(+), 37 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 68a8a27ab3b7..be9773270e53 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -415,6 +415,7 @@ config SENSORS_ATXP1
config SENSORS_BT1_PVT
tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
+ select POLYNOMIAL
help
If you say yes here you get support for Baikal-T1 PVT sensor
embedded into the SoC.
diff --git a/drivers/hwmon/bt1-pvt.c b/drivers/hwmon/bt1-pvt.c
index 74ce5211eb75..21ab172774ec 100644
--- a/drivers/hwmon/bt1-pvt.c
+++ b/drivers/hwmon/bt1-pvt.c
@@ -26,6 +26,7 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/polynomial.h>
#include <linux/seqlock.h>
#include <linux/sysfs.h>
#include <linux/types.h>
@@ -65,7 +66,7 @@ static const struct pvt_sensor_info pvt_info[] = {
* 48380,
* where T = [-48380, 147438] mC and N = [0, 1023].
*/
-static const struct pvt_poly __maybe_unused poly_temp_to_N = {
+static const struct polynomial __maybe_unused poly_temp_to_N = {
.total_divider = 10000,
.terms = {
{4, 18322, 10000, 10000},
@@ -76,7 +77,7 @@ static const struct pvt_poly __maybe_unused poly_temp_to_N = {
}
};
-static const struct pvt_poly poly_N_to_temp = {
+static const struct polynomial poly_N_to_temp = {
.total_divider = 1,
.terms = {
{4, -16743, 1000, 1},
@@ -97,7 +98,7 @@ static const struct pvt_poly poly_N_to_temp = {
* N = (18658e-3*V - 11572) / 10,
* V = N * 10^5 / 18658 + 11572 * 10^4 / 18658.
*/
-static const struct pvt_poly __maybe_unused poly_volt_to_N = {
+static const struct polynomial __maybe_unused poly_volt_to_N = {
.total_divider = 10,
.terms = {
{1, 18658, 1000, 1},
@@ -105,7 +106,7 @@ static const struct pvt_poly __maybe_unused poly_volt_to_N = {
}
};
-static const struct pvt_poly poly_N_to_volt = {
+static const struct polynomial poly_N_to_volt = {
.total_divider = 10,
.terms = {
{1, 100000, 18658, 1},
@@ -113,31 +114,6 @@ static const struct pvt_poly poly_N_to_volt = {
}
};
-/*
- * Here is the polynomial calculation function, which performs the
- * redistributed terms calculations. It's pretty straightforward. We walk
- * over each degree term up to the free one, and perform the redistributed
- * multiplication of the term coefficient, its divider (as for the rationale
- * fraction representation), data power and the rational fraction divider
- * leftover. Then all of this is collected in a total sum variable, which
- * value is normalized by the total divider before being returned.
- */
-static long pvt_calc_poly(const struct pvt_poly *poly, long data)
-{
- const struct pvt_poly_term *term = poly->terms;
- long tmp, ret = 0;
- int deg;
-
- do {
- tmp = term->coef;
- for (deg = 0; deg < term->deg; ++deg)
- tmp = mult_frac(tmp, data, term->divider);
- ret += tmp / term->divider_leftover;
- } while ((term++)->deg);
-
- return ret / poly->total_divider;
-}
-
static inline u32 pvt_update(void __iomem *reg, u32 mask, u32 data)
{
u32 old;
@@ -324,9 +300,9 @@ static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
} while (read_seqretry(&cache->data_seqlock, seq));
if (type == PVT_TEMP)
- *val = pvt_calc_poly(&poly_N_to_temp, data);
+ *val = polynomial_calc(&poly_N_to_temp, data);
else
- *val = pvt_calc_poly(&poly_N_to_volt, data);
+ *val = polynomial_calc(&poly_N_to_volt, data);
return 0;
}
@@ -345,9 +321,9 @@ static int pvt_read_limit(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
data = FIELD_GET(PVT_THRES_HI_MASK, data);
if (type == PVT_TEMP)
- *val = pvt_calc_poly(&poly_N_to_temp, data);
+ *val = polynomial_calc(&poly_N_to_temp, data);
else
- *val = pvt_calc_poly(&poly_N_to_volt, data);
+ *val = polynomial_calc(&poly_N_to_volt, data);
return 0;
}
@@ -360,10 +336,10 @@ static int pvt_write_limit(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
if (type == PVT_TEMP) {
val = clamp(val, PVT_TEMP_MIN, PVT_TEMP_MAX);
- data = pvt_calc_poly(&poly_temp_to_N, val);
+ data = polynomial_calc(&poly_temp_to_N, val);
} else {
val = clamp(val, PVT_VOLT_MIN, PVT_VOLT_MAX);
- data = pvt_calc_poly(&poly_volt_to_N, val);
+ data = polynomial_calc(&poly_volt_to_N, val);
}
/* Serialize limit update, since a part of the register is changed. */
@@ -522,9 +498,9 @@ static int pvt_read_data(struct pvt_hwmon *pvt, enum pvt_sensor_type type,
return -ETIMEDOUT;
if (type == PVT_TEMP)
- *val = pvt_calc_poly(&poly_N_to_temp, data);
+ *val = polynomial_calc(&poly_N_to_temp, data);
else
- *val = pvt_calc_poly(&poly_N_to_volt, data);
+ *val = polynomial_calc(&poly_N_to_volt, data);
return 0;
}
--
2.30.2
Powered by blists - more mailing lists