[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFo_PYc9ofWuXeaE86oK6FqOAnHsH-ZSG58MfNq8nEOVOw@mail.gmail.com>
Date: Fri, 1 Apr 2022 11:34:39 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Axe Yang <axe.yang@...iatek.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Adrian Hunter <adrian.hunter@...el.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Satya Tangirala <satyat@...gle.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Lucas Stach <dev@...xeye.de>,
Eric Biggers <ebiggers@...gle.com>,
Andrew Jeffery <andrew@...id.au>,
Stephen Boyd <swboyd@...omium.org>,
Kiwoong Kim <kwmad.kim@...sung.com>,
Yue Hu <huyue2@...ong.com>, Tian Tao <tiantao6@...ilicon.com>,
angelogioacchino.delregno@...labora.com, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v9 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and
pinctrls properties
On Fri, 1 Apr 2022 at 11:22, Ulf Hansson <ulf.hansson@...aro.org> wrote:
>
> On Tue, 29 Mar 2022 at 05:29, Axe Yang <axe.yang@...iatek.com> wrote:
> >
> > Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
> > This feature allow SDIO devices alarm asynchronous interrupt to host
> > even when host stop providing clock to SDIO card. An extra wakeup
> > interrupt and pinctrl states for SDIO DAT1 pin state switching are
> > required in this scenario.
> >
> > Signed-off-by: Axe Yang <axe.yang@...iatek.com>
> > ---
> > .../devicetree/bindings/mmc/mtk-sd.yaml | 17 ++++++++++++++++-
> > 1 file changed, 16 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > index 297ada03e3de..3872a6ce2867 100644
> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> > @@ -69,12 +69,22 @@ properties:
> > - const: ahb_cg
> >
> > interrupts:
> > - maxItems: 1
> > + description:
> > + Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
> > + interrupt is required and be configured as wakeup source irq.
>
> If I understand correctly, the extended interrupt (a GPIO irq) may not
> necessarily share the same interrupt parent as the primary device
> interrupt.
>
> Perhaps it's then better to extend this with "interrupts-extended"
> instead. See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
One more thing, looks like using the "interrupt-names" property would
be good to use too. To easier distinguish the different irqs.
[...]
Kind regards
Uffe
Powered by blists - more mailing lists