| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220405070432.956643666@linuxfoundation.org>
Date: Tue, 5 Apr 2022 09:26:53 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, John David Anglin <dave.anglin@...l.net>,
Helge Deller <deller@....de>, Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.17 0866/1126] parisc: Fix handling off probe non-access faults
From: John David Anglin <dave.anglin@...l.net>
[ Upstream commit e00b0a2ab8ec019c344e53bfc76e31c18bb587b7 ]
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <dave.anglin@...l.net>
Signed-off-by: Helge Deller <deller@....de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/parisc/include/asm/traps.h | 1 +
arch/parisc/kernel/traps.c | 2 +
arch/parisc/mm/fault.c | 89 +++++++++++++++++++++++++++++++++
3 files changed, 92 insertions(+)
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 34619f010c63..0ccdb738a9a3 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -18,6 +18,7 @@ unsigned long parisc_acctyp(unsigned long code, unsigned int inst);
const char *trap_name(unsigned long code);
void do_page_fault(struct pt_regs *regs, unsigned long code,
unsigned long address);
+int handle_nadtlb_fault(struct pt_regs *regs);
#endif
#endif
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index b6fdebddc8e9..39576a9245c7 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -662,6 +662,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
by hand. Technically we need to emulate:
fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw
*/
+ if (code == 17 && handle_nadtlb_fault(regs))
+ return;
fault_address = regs->ior;
fault_space = regs->isr;
break;
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index e9eabf8f14d7..f114e102aaf2 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -425,3 +425,92 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
}
pagefault_out_of_memory();
}
+
+/* Handle non-access data TLB miss faults.
+ *
+ * For probe instructions, accesses to userspace are considered allowed
+ * if they lie in a valid VMA and the access type matches. We are not
+ * allowed to handle MM faults here so there may be situations where an
+ * actual access would fail even though a probe was successful.
+ */
+int
+handle_nadtlb_fault(struct pt_regs *regs)
+{
+ unsigned long insn = regs->iir;
+ int breg, treg, xreg, val = 0;
+ struct vm_area_struct *vma, *prev_vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long address;
+ unsigned long acc_type;
+
+ switch (insn & 0x380) {
+ case 0x280:
+ /* FDC instruction */
+ fallthrough;
+ case 0x380:
+ /* PDC and FIC instructions */
+ if (printk_ratelimit()) {
+ pr_warn("BUG: nullifying cache flush/purge instruction\n");
+ show_regs(regs);
+ }
+ if (insn & 0x20) {
+ /* Base modification */
+ breg = (insn >> 21) & 0x1f;
+ xreg = (insn >> 16) & 0x1f;
+ if (breg && xreg)
+ regs->gr[breg] += regs->gr[xreg];
+ }
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ case 0x180:
+ /* PROBE instruction */
+ treg = insn & 0x1f;
+ if (regs->isr) {
+ tsk = current;
+ mm = tsk->mm;
+ if (mm) {
+ /* Search for VMA */
+ address = regs->ior;
+ mmap_read_lock(mm);
+ vma = find_vma_prev(mm, address, &prev_vma);
+ mmap_read_unlock(mm);
+
+ /*
+ * Check if access to the VMA is okay.
+ * We don't allow for stack expansion.
+ */
+ acc_type = (insn & 0x40) ? VM_WRITE : VM_READ;
+ if (vma
+ && address >= vma->vm_start
+ && (vma->vm_flags & acc_type) == acc_type)
+ val = 1;
+ }
+ }
+ if (treg)
+ regs->gr[treg] = val;
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ case 0x300:
+ /* LPA instruction */
+ if (insn & 0x20) {
+ /* Base modification */
+ breg = (insn >> 21) & 0x1f;
+ xreg = (insn >> 16) & 0x1f;
+ if (breg && xreg)
+ regs->gr[breg] += regs->gr[xreg];
+ }
+ treg = insn & 0x1f;
+ if (treg)
+ regs->gr[treg] = 0;
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
--
2.34.1
Powered by blists - more mailing lists