| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Apr 2022 16:55:40 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Brian Norris <briannorris@...omium.org>
Cc: Adrian Hunter <adrian.hunter@...el.com>,
Douglas Anderson <dianders@...omium.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Shawn Lin <shawn.lin@...k-chips.com>,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] mmc: core: Set HS clock speed before sending HS CMD13
On Wed, 30 Mar 2022 at 22:30, Brian Norris <briannorris@...omium.org> wrote:
>
> Way back in commit 4f25580fb84d ("mmc: core: changes frequency to
> hs_max_dtr when selecting hs400es"), Rockchip engineers noticed that
> some eMMC don't respond to SEND_STATUS commands very reliably if they're
> still running at a low initial frequency. As mentioned in that commit,
> JESD84-B51 P49 suggests a sequence in which the host:
> 1. sets HS_TIMING
> 2. bumps the clock ("<= 52 MHz")
> 3. sends further commands
>
> It doesn't exactly require that we don't use a lower-than-52MHz
> frequency, but in practice, these eMMC don't like it.
>
> The aforementioned commit tried to get that right for HS400ES, although
> it's unclear whether this ever truly worked as committed into mainline,
> as other changes/refactoring adjusted the sequence in conflicting ways:
>
> 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode
> switch")
>
> 53e60650f74e ("mmc: core: Allow CMD13 polling when switching to HS mode
> for mmc")
>
> In any case, today we do step 3 before step 2. Let's fix that, and also
> apply the same logic to HS200/400, where this eMMC has problems too.
>
> Resolves errors like this seen when booting some RK3399 Gru/Scarlet
> systems:
>
> [ 2.058881] mmc1: CQHCI version 5.10
> [ 2.097545] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
> [ 2.209804] mmc1: mmc_select_hs400es failed, error -84
> [ 2.215597] mmc1: error -84 whilst initialising MMC card
> [ 2.417514] mmc1: mmc_select_hs400es failed, error -110
> [ 2.423373] mmc1: error -110 whilst initialising MMC card
> [ 2.605052] mmc1: mmc_select_hs400es failed, error -110
> [ 2.617944] mmc1: error -110 whilst initialising MMC card
> [ 2.835884] mmc1: mmc_select_hs400es failed, error -110
> [ 2.841751] mmc1: error -110 whilst initialising MMC card
>
> Fixes: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch")
> Fixes: 53e60650f74e ("mmc: core: Allow CMD13 polling when switching to HS mode for mmc")
> Fixes: 4f25580fb84d ("mmc: core: changes frequency to hs_max_dtr when selecting hs400es")
> Cc: Shawn Lin <shawn.lin@...k-chips.com>
> Signed-off-by: Brian Norris <briannorris@...omium.org>
To get this thoroughly tested, I have applied it to my next branch, for now.
If it turns out that there are no regressions being reported, I think
we should move the patch to the fixes branch (to get it included for
v5.18) and then also tag it for stable. So, I will get back to this in
a couple of weeks.
Thanks and kind regards
Uffe
> ---
>
> Changes in v3:
> * Use mmc_set_bus_speed() to help choose the right clock rate
> * Avoid redundant clock rate changes
> * Restore clock rate on failed HS200 switch
>
> Changes in v2:
> * Use ext_csd.hs200_max_dtr for HS200
> * Retest on top of 3b6c472822f8 ("mmc: core: Improve fallback to speed
> modes if eMMC HS200 fails")
>
> drivers/mmc/core/core.c | 3 +++
> drivers/mmc/core/mmc.c | 21 +++++++++++++++++----
> 2 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 368f10405e13..61abae221623 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -914,6 +914,9 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz)
> if (hz > host->f_max)
> hz = host->f_max;
>
> + if (host->ios.clock == hz)
> + return;
> +
> host->ios.clock = hz;
> mmc_set_ios(host);
> }
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index e7ea45386c22..1f22f1d2e9b8 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1384,13 +1384,17 @@ static int mmc_select_hs400es(struct mmc_card *card)
> goto out_err;
> }
>
> + /*
> + * Bump to HS timing and frequency. Some cards don't handle
> + * SEND_STATUS reliably at the initial frequency.
> + */
> mmc_set_timing(host, MMC_TIMING_MMC_HS);
> + mmc_set_bus_speed(card);
> +
> err = mmc_switch_status(card, true);
> if (err)
> goto out_err;
>
> - mmc_set_clock(host, card->ext_csd.hs_max_dtr);
> -
> /* Switch card to DDR with strobe bit */
> val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE;
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> @@ -1448,7 +1452,7 @@ static int mmc_select_hs400es(struct mmc_card *card)
> static int mmc_select_hs200(struct mmc_card *card)
> {
> struct mmc_host *host = card->host;
> - unsigned int old_timing, old_signal_voltage;
> + unsigned int old_timing, old_signal_voltage, old_clock;
> int err = -EINVAL;
> u8 val;
>
> @@ -1479,8 +1483,15 @@ static int mmc_select_hs200(struct mmc_card *card)
> false, true, MMC_CMD_RETRIES);
> if (err)
> goto err;
> +
> + /*
> + * Bump to HS200 timing and frequency. Some cards don't
> + * handle SEND_STATUS reliably at the initial frequency.
> + */
> old_timing = host->ios.timing;
> + old_clock = host->ios.clock;
> mmc_set_timing(host, MMC_TIMING_MMC_HS200);
> + mmc_set_bus_speed(card);
>
> /*
> * For HS200, CRC errors are not a reliable way to know the
> @@ -1493,8 +1504,10 @@ static int mmc_select_hs200(struct mmc_card *card)
> * mmc_select_timing() assumes timing has not changed if
> * it is a switch error.
> */
> - if (err == -EBADMSG)
> + if (err == -EBADMSG) {
> + mmc_set_clock(host, old_clock);
> mmc_set_timing(host, old_timing);
> + }
> }
> err:
> if (err) {
> --
> 2.35.1.1094.g7c7d902a7c-goog
>
Powered by blists - more mailing lists