linux-kernel - [PATCH v3 1/2] arm64: dts: ti: k3-j721e-main: add DP & DP PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220406165852.13026-2-r-ravikumar@ti.com>
Date:   Wed, 6 Apr 2022 22:28:51 +0530
From:   Rahul T R <r-ravikumar@...com>
To:     <nm@...com>
CC:     <vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski@...onical.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <tomi.valkeinen@...asonboard.com>,
        <laurent.pinchart@...asonboard.com>, <kishon@...com>,
        <r-ravikumar@...com>
Subject: [PATCH v3 1/2] arm64: dts: ti: k3-j721e-main: add DP & DP PHY

From: Tomi Valkeinen <tomi.valkeinen@...com>

Add DT nodes for DisplayPort and DisplayPort PHY. The DP is Cadence MHDP
8546 and the PHY is a Cadence Torrent PHY with TI WIZ wrapper.

A slight irregularity in the bindings is the DPTX PHY register block,
which is in the MHDP IP, but is needed and mapped by the PHY.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...com>
Signed-off-by: Rahul T R <r-ravikumar@...com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 65 +++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index db0669985e42..11426c25a09d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -5,6 +5,7 @@
  * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
 #include <dt-bindings/mux/mux.h>
 #include <dt-bindings/mux/ti-serdes.h>
 
@@ -789,6 +790,47 @@
 		#size-cells = <2>;
 	};
 
+	serdes_wiz4: wiz@...0000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 297 9>;
+		assigned-clock-parents = <&k3_clks 297 10>;
+		assigned-clock-rates = <19200000>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x5050000 0x0 0x5050000 0x10000>,
+			<0xa030a00 0x0 0xa030a00 0x40>;
+
+		serdes4: serdes@...0000 {
+			/*
+			 * Note: we also map DPTX PHY registers as the Torrent
+			 * needs to manage those.
+			 */
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x5050000 0x10000>,
+			      <0xa030a00 0x40>; /* DPTX PHY */
+			reg-names = "torrent_phy", "dptx_phy";
+
+			resets = <&serdes_wiz4 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>;
+			clock-names = "refclk";
+			assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 297 9>,
+						 <&k3_clks 297 9>,
+						 <&k3_clks 297 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	main_uart0: serial@...0000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -1267,6 +1309,29 @@
 		};
 	};
 
+	mhdp: dp-bridge@...0000 {
+		compatible = "ti,j721e-mhdp8546";
+		/*
+		 * Note: we do not map DPTX PHY area, as that is handled by
+		 * the PHY driver.
+		 */
+		reg = <0x0 0xa000000 0x0 0x30a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */
+		      <0x0 0x4f40000 0x0 0x20>;    /* DSS_EDP0_INTG_CFG_VP */
+		reg-names = "mhdptx", "j721e-intg";
+
+		clocks = <&k3_clks 151 36>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	dss: dss@...0000 {
 		compatible = "ti,j721e-dss";
 		reg =
-- 
2.17.1