| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220406195436.4mp22n5pjw73jr2i@mobilestation>
Date: Wed, 6 Apr 2022 22:54:36 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Damien Le Moal <damien.lemoal@...nsource.wdc.com>
Cc: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Hans de Goede <hdegoede@...hat.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
Rob Herring <robh+dt@...nel.org>, linux-ide@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 00/21] ata: ahci: Add DWC/Baikal-T1 AHCI SATA support
Hello Damien
On Tue, Mar 29, 2022 at 05:30:43PM +0900, Damien Le Moal wrote:
> On 3/29/22 05:06, Damien Le Moal wrote:
> > On 3/24/22 09:16, Serge Semin wrote:
> > [...]
> >> After the denoted above functionality is added we can finally introduce
> >> the Baikal-T1 AHCI SATA controller support into the DWC AHCI SATA driver.
> >> The controller is based on the DWC AHCI SATA IP-core v4.10a and can work
> >> well with the generic DWC AHCI driver. The only peculiarity of it is
> >> connected with the SATA Ports reference clock source. It can be supplied
> >> either from the internal SoC PLL or from the chip pads. Currently we have
> >> to prefer selecting the signal coming from the pads if the corresponding
> >> clock source is specified because the link doesn't get stably established
> >> when the internal clock signal is activated. In addition the platform has
> >> trigger-based reset signals so the corresponding flag must be passed to
> >> the generic AHCI-resource getter.
> >>
> >
> > I am assuming this is "v2" of your patches. Please add this version number
> > to your patch titles ("[PATCH v2]") and add a changelog here in the cover
> > letter.
>
> Sorry. It looks like I received again the same patch series. Not sure why.
> I assumed it was a V2, but it is not.
Most likely you've received the series released by the mailing list
service. I've sent four patchsets at a time then, and I guess the
spam-filter was unhappy about that. So all the series were sustained
for some time and were unavailable in the lore and patchwork. In after
about four days they turned to be finally available. At least I
finally was able to see my patchsets there after getting your messages
above, which made me to re-check the series status.
-Sergey
>
> >
> >> Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
> >> Cc: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
> >> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>
> >> Cc: Rob Herring <robh+dt@...nel.org>
> >> Cc: linux-ide@...r.kernel.org
> >> Cc: linux-kernel@...r.kernel.org
> >> Cc: devicetree@...r.kernel.org
> >>
> >> Serge Semin (21):
> >> dt-bindings: ata: sata: Extend number of SATA ports
> >> dt-bindings: ata: Convert AHCI-bindings to DT schema
> >> ata: libahci_platform: Explicitly set rc on devres_alloc failure
> >> ata: libahci_platform: Convert to using handy devm-ioremap methods
> >> ata: libahci_platform: Convert to using devm bulk clocks API
> >> ata: libahci_platform: Add function returning a clock-handle by id
> >> ata: libahci_platform: Sanity check the DT child nodes number
> >> ata: libahci_platform: Parse ports-implemented property in resources
> >> getter
> >> ata: libahci_platform: Introduce reset assertion/deassertion methods
> >> dt-bindings: ata: ahci: Add platform capability properties
> >> ata: libahci: Extend port-cmd flags set with port capabilities
> >> ata: libahci: Discard redundant force_port_map parameter
> >> ata: libahci: Don't read AHCI version twice in the save-config method
> >> ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
> >> ata: ahci: Introduce firmware-specific caps initialization
> >> dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
> >> ata: ahci: Add DWC AHCI SATA controller support
> >> dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema
> >> ata: ahci-dwc: Add platform-specific quirks support
> >> ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support
> >> MAINTAINERS: Add maintainers for DWC AHCI SATA driver
> >>
> >> .../devicetree/bindings/ata/ahci-common.yaml | 176 ++++++
> >> .../devicetree/bindings/ata/ahci-platform.txt | 79 ---
> >> .../bindings/ata/baikal,bt1-ahci.yaml | 132 +++++
> >> .../devicetree/bindings/ata/generic-ahci.yaml | 98 ++++
> >> .../devicetree/bindings/ata/sata-common.yaml | 7 +-
> >> .../bindings/ata/snps,dwc-ahci.yaml | 121 ++++
> >> MAINTAINERS | 9 +
> >> drivers/ata/Kconfig | 11 +
> >> drivers/ata/Makefile | 1 +
> >> drivers/ata/ahci.c | 4 +-
> >> drivers/ata/ahci.h | 21 +-
> >> drivers/ata/ahci_dwc.c | 525 ++++++++++++++++++
> >> drivers/ata/ahci_mtk.c | 2 -
> >> drivers/ata/ahci_platform.c | 5 -
> >> drivers/ata/ahci_st.c | 3 -
> >> drivers/ata/libahci.c | 63 ++-
> >> drivers/ata/libahci_platform.c | 234 +++++---
> >> include/linux/ahci_platform.h | 8 +-
> >> 18 files changed, 1321 insertions(+), 178 deletions(-)
> >> create mode 100644 Documentation/devicetree/bindings/ata/ahci-common.yaml
> >> delete mode 100644 Documentation/devicetree/bindings/ata/ahci-platform.txt
> >> create mode 100644 Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
> >> create mode 100644 Documentation/devicetree/bindings/ata/generic-ahci.yaml
> >> create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> >> create mode 100644 drivers/ata/ahci_dwc.c
> >>
> >
> >
>
>
> --
> Damien Le Moal
> Western Digital Research
Powered by blists - more mailing lists