| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 7 Apr 2022 20:58:36 +0800
From: Yicong Yang <yangyicong@...ilicon.com>
To: <gregkh@...uxfoundation.org>, <helgaas@...nel.org>,
<alexander.shishkin@...ux.intel.com>, <lorenzo.pieralisi@....com>,
<will@...nel.org>, <mark.rutland@....com>,
<mathieu.poirier@...aro.org>, <suzuki.poulose@....com>,
<mike.leach@...aro.org>, <leo.yan@...aro.org>,
<jonathan.cameron@...wei.com>, <daniel.thompson@...aro.org>,
<joro@...tes.org>, <john.garry@...wei.com>,
<shameerali.kolothum.thodi@...wei.com>, <robin.murphy@....com>,
<peterz@...radead.org>, <mingo@...hat.com>, <acme@...nel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<coresight@...ts.linaro.org>, <linux-pci@...r.kernel.org>,
<linux-perf-users@...r.kernel.org>,
<iommu@...ts.linux-foundation.org>
CC: <prime.zeng@...wei.com>, <liuqi115@...wei.com>,
<zhangshaokun@...ilicon.com>, <linuxarm@...wei.com>,
<yangyicong@...ilicon.com>
Subject: [PATCH v7 2/7] hwtracing: Add trace function support for HiSilicon PCIe Tune and Trace device
HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex integrated
Endpoint(RCiEP) device, providing the capability to dynamically monitor and
tune the PCIe traffic, and trace the TLP headers.
Add the driver for the device to enable the trace function. Register PMU
device of PTT trace, then users can use trace through perf command. The
driver makes use of perf AUX trace and support following events to
configure the trace:
- filter: select Root port or Endpoint to trace
- type: select the type of traced TLP headers
- direction: select the direction of traced TLP headers
- format: select the data format of the traced TLP headers
This patch adds the driver part of PTT trace. The perf command support of
PTT trace is added in the following patch.
Signed-off-by: Yicong Yang <yangyicong@...ilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
---
drivers/Makefile | 1 +
drivers/hwtracing/Kconfig | 2 +
drivers/hwtracing/ptt/Kconfig | 12 +
drivers/hwtracing/ptt/Makefile | 2 +
drivers/hwtracing/ptt/hisi_ptt.c | 874 +++++++++++++++++++++++++++++++
drivers/hwtracing/ptt/hisi_ptt.h | 166 ++++++
6 files changed, 1057 insertions(+)
create mode 100644 drivers/hwtracing/ptt/Kconfig
create mode 100644 drivers/hwtracing/ptt/Makefile
create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
diff --git a/drivers/Makefile b/drivers/Makefile
index 020780b6b4d2..662d50599467 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -175,6 +175,7 @@ obj-$(CONFIG_USB4) += thunderbolt/
obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
obj-y += hwtracing/intel_th/
obj-$(CONFIG_STM) += hwtracing/stm/
+obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/
obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_NVMEM) += nvmem/
obj-$(CONFIG_FPGA) += fpga/
diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
index 13085835a636..911ee977103c 100644
--- a/drivers/hwtracing/Kconfig
+++ b/drivers/hwtracing/Kconfig
@@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
source "drivers/hwtracing/intel_th/Kconfig"
+source "drivers/hwtracing/ptt/Kconfig"
+
endmenu
diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
new file mode 100644
index 000000000000..8902a6f27563
--- /dev/null
+++ b/drivers/hwtracing/ptt/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config HISI_PTT
+ tristate "HiSilicon PCIe Tune and Trace Device"
+ depends on ARM64 || (COMPILE_TEST && 64BIT)
+ depends on PCI && HAS_DMA && HAS_IOMEM && PERF_EVENTS
+ help
+ HiSilicon PCIe Tune and Trace Device exists as a PCIe RCiEP
+ device, and it provides support for PCIe traffic tuning and
+ tracing TLP headers to the memory.
+
+ This driver can also be built as a module. If so, the module
+ will be called hisi_ptt.
diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
new file mode 100644
index 000000000000..908c09a98161
--- /dev/null
+++ b/drivers/hwtracing/ptt/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
new file mode 100644
index 000000000000..242b41870380
--- /dev/null
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -0,0 +1,874 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for HiSilicon PCIe tune and trace device
+ *
+ * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
+ * Author: Yicong Yang <yangyicong@...ilicon.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/dma-iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/sysfs.h>
+#include <linux/vmalloc.h>
+
+#include "hisi_ptt.h"
+
+static u16 hisi_ptt_get_filter_val(struct pci_dev *pdev)
+{
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+ return BIT(HISI_PCIE_CORE_PORT_ID(PCI_SLOT(pdev->devfn)));
+
+ return PCI_DEVID(pdev->bus->number, pdev->devfn);
+}
+
+static bool hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
+{
+ u32 val;
+
+ return !readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_STS,
+ val, val & HISI_PTT_TRACE_IDLE,
+ HISI_PTT_WAIT_POLL_INTERVAL_US,
+ HISI_PTT_WAIT_TRACE_TIMEOUT_US);
+}
+
+static bool hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt)
+{
+ u32 val;
+
+ return !readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS,
+ val, !val, HISI_PTT_RESET_POLL_INTERVAL_US,
+ HISI_PTT_RESET_TIMEOUT_US);
+}
+
+static void hisi_ptt_free_trace_buf(struct hisi_ptt *hisi_ptt)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ struct device *dev = &hisi_ptt->pdev->dev;
+ int i;
+
+ if (!ctrl->trace_buf)
+ return;
+
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) {
+ if (ctrl->trace_buf[i].addr)
+ dmam_free_coherent(dev, HISI_PTT_TRACE_BUF_SIZE,
+ ctrl->trace_buf[i].addr,
+ ctrl->trace_buf[i].dma);
+ }
+
+ devm_kfree(dev, ctrl->trace_buf);
+ ctrl->trace_buf = NULL;
+}
+
+static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ struct device *dev = &hisi_ptt->pdev->dev;
+ int i;
+
+ hisi_ptt->trace_ctrl.buf_index = 0;
+
+ /* If the trace buffer has already been allocated, zero it. */
+ if (ctrl->trace_buf) {
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++)
+ memset(ctrl->trace_buf[i].addr, 0, HISI_PTT_TRACE_BUF_SIZE);
+ return 0;
+ }
+
+ ctrl->trace_buf = devm_kcalloc(dev, HISI_PTT_TRACE_BUF_CNT,
+ sizeof(struct hisi_ptt_dma_buffer), GFP_KERNEL);
+ if (!ctrl->trace_buf)
+ return -ENOMEM;
+
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
+ ctrl->trace_buf[i].addr = dmam_alloc_coherent(dev, HISI_PTT_TRACE_BUF_SIZE,
+ &ctrl->trace_buf[i].dma,
+ GFP_KERNEL);
+ if (!ctrl->trace_buf[i].addr) {
+ hisi_ptt_free_trace_buf(hisi_ptt);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
+{
+ writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ hisi_ptt->trace_ctrl.started = false;
+}
+
+static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ u32 val;
+ int i;
+
+ /* Check device idle before start trace */
+ if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
+ pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy\n");
+ return -EBUSY;
+ }
+
+ ctrl->started = true;
+
+ /* Reset the DMA before start tracing */
+ val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ val |= HISI_PTT_TRACE_CTRL_RST;
+ writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+ hisi_ptt_wait_dma_reset_done(hisi_ptt);
+
+ val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ val &= ~HISI_PTT_TRACE_CTRL_RST;
+ writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+ /* Clear the interrupt status */
+ writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+ writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
+
+ /* Configure the trace DMA buffer */
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) {
+ writel(lower_32_bits(ctrl->trace_buf[i].dma),
+ hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
+ i * HISI_PTT_TRACE_ADDR_STRIDE);
+ writel(upper_32_bits(ctrl->trace_buf[i].dma),
+ hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
+ i * HISI_PTT_TRACE_ADDR_STRIDE);
+ }
+ writel(HISI_PTT_TRACE_BUF_SIZE, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
+
+ /* Set the trace control register */
+ val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
+ val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
+ val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
+ val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
+ if (!hisi_ptt->trace_ctrl.is_port)
+ val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
+
+ /* Start the Trace */
+ val |= HISI_PTT_TRACE_CTRL_EN;
+ writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+ return 0;
+}
+
+static int hisi_ptt_update_aux(struct hisi_ptt *hisi_ptt, int index, bool stop)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ struct perf_output_handle *handle = &ctrl->handle;
+ struct perf_event *event = handle->event;
+ struct hisi_ptt_pmu_buf *buf;
+ void *addr;
+
+ buf = perf_get_aux(handle);
+ if (!buf || !handle->size)
+ return -EINVAL;
+
+ addr = ctrl->trace_buf[ctrl->buf_index].addr;
+
+ memcpy(buf->base + buf->pos, addr, HISI_PTT_TRACE_BUF_SIZE);
+ memset(addr, 0, HISI_PTT_TRACE_BUF_SIZE);
+ buf->pos += HISI_PTT_TRACE_BUF_SIZE;
+
+ if (stop) {
+ perf_aux_output_end(handle, buf->pos);
+ } else if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) {
+ perf_aux_output_skip(handle, buf->length - buf->pos);
+ perf_aux_output_end(handle, buf->pos);
+
+ buf = perf_aux_output_begin(handle, event);
+ if (!buf)
+ return -EINVAL;
+
+ buf->pos = handle->head % buf->length;
+ if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) {
+ perf_aux_output_end(handle, 0);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static irqreturn_t hisi_ptt_isr(int irq, void *context)
+{
+ struct hisi_ptt *hisi_ptt = context;
+ u32 status, buf_idx;
+
+ status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+ buf_idx = ffs(status) - 1;
+
+ /* Clear the interrupt status of buffer @buf_idx */
+ writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+
+ /*
+ * Update the AUX buffer and cache the current buffer index,
+ * as we need to know this and save the data when the trace
+ * is ended out of the interrupt handler. End the trace
+ * if the updating fails.
+ */
+ if (hisi_ptt_update_aux(hisi_ptt, buf_idx, false))
+ hisi_ptt_trace_end(hisi_ptt);
+ else
+ hisi_ptt->trace_ctrl.buf_index = (buf_idx + 1) % HISI_PTT_TRACE_BUF_CNT;
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t hisi_ptt_irq(int irq, void *context)
+{
+ struct hisi_ptt *hisi_ptt = context;
+ u32 status;
+
+ status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+ if (!(status & HISI_PTT_TRACE_INT_STAT_MASK))
+ return IRQ_NONE;
+
+ return IRQ_WAKE_THREAD;
+}
+
+static void hisi_ptt_irq_free_vectors(void *pdev)
+{
+ pci_free_irq_vectors(pdev);
+}
+
+static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
+{
+ struct pci_dev *pdev = hisi_ptt->pdev;
+ int ret;
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+ if (ret < 0) {
+ pci_err(pdev, "failed to allocate irq vector, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_request_threaded_irq(&pdev->dev,
+ pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ),
+ hisi_ptt_irq, hisi_ptt_isr, 0,
+ DRV_NAME, hisi_ptt);
+ if (ret) {
+ pci_err(pdev, "failed to request irq %d, ret = %d\n",
+ pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
+{
+ struct hisi_ptt_filter_desc *filter;
+ struct hisi_ptt *hisi_ptt = data;
+ struct list_head *target_list;
+
+ target_list = pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ?
+ &hisi_ptt->port_filters : &hisi_ptt->req_filters;
+
+ filter = kzalloc(sizeof(*filter), GFP_KERNEL);
+ if (!filter) {
+ pci_err(hisi_ptt->pdev, "failed to add filter %s\n", pci_name(pdev));
+ return -ENOMEM;
+ }
+
+ filter->pdev = pdev;
+ list_add_tail(&filter->list, target_list);
+
+ /* Update the available port mask */
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+ hisi_ptt->port_mask |= hisi_ptt_get_filter_val(pdev);
+
+ return 0;
+}
+
+static void hisi_ptt_release_filters(void *data)
+{
+ struct hisi_ptt_filter_desc *filter, *tfilter;
+ struct hisi_ptt *hisi_ptt = data;
+
+ list_for_each_entry_safe(filter, tfilter, &hisi_ptt->req_filters, list) {
+ list_del(&filter->list);
+ kfree(filter);
+ }
+
+ list_for_each_entry_safe(filter, tfilter, &hisi_ptt->port_filters, list) {
+ list_del(&filter->list);
+ kfree(filter);
+ }
+}
+
+static int hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
+{
+ struct pci_dev *pdev = hisi_ptt->pdev;
+ struct pci_bus *bus;
+ int ret;
+ u32 reg;
+
+ INIT_LIST_HEAD(&hisi_ptt->port_filters);
+ INIT_LIST_HEAD(&hisi_ptt->req_filters);
+
+ /*
+ * The device range register provides the information about the
+ * root ports which the RCiEP can control and trace. The RCiEP
+ * and the root ports it support are on the same PCIe core, with
+ * same domain number but maybe different bus number. The device
+ * range register will tell us which root ports we can support,
+ * Bit[31:16] indicates the upper BDF numbers of the root port,
+ * while Bit[15:0] indicates the lower.
+ */
+ reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
+ hisi_ptt->upper = FIELD_GET(HISI_PTT_DEVICE_RANGE_UPPER, reg);
+ hisi_ptt->lower = FIELD_GET(HISI_PTT_DEVICE_RANGE_LOWER, reg);
+
+ bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
+ if (bus)
+ pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
+
+ ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_release_filters, hisi_ptt);
+ if (ret)
+ return ret;
+
+ hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
+
+ return 0;
+}
+
+#define HISI_PTT_PMU_FILTER_IS_PORT BIT(19)
+#define HISI_PTT_PMU_FILTER_VAL_MASK GENMASK(15, 0)
+#define HISI_PTT_PMU_DIRECTION_MASK GENMASK(23, 20)
+#define HISI_PTT_PMU_TYPE_MASK GENMASK(31, 24)
+#define HISI_PTT_PMU_FORMAT_MASK GENMASK(35, 32)
+
+static ssize_t available_root_port_filters_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev));
+ struct hisi_ptt_filter_desc *filter;
+ int pos = 0;
+
+ mutex_lock(&hisi_ptt->mutex);
+ if (list_empty(&hisi_ptt->port_filters)) {
+ pos = sysfs_emit(buf, "\n");
+ goto out;
+ }
+
+ list_for_each_entry(filter, &hisi_ptt->port_filters, list)
+ pos += sysfs_emit_at(buf, pos, "%s 0x%05lx\n",
+ pci_name(filter->pdev),
+ hisi_ptt_get_filter_val(filter->pdev) |
+ HISI_PTT_PMU_FILTER_IS_PORT);
+
+out:
+ mutex_unlock(&hisi_ptt->mutex);
+ return pos;
+}
+static DEVICE_ATTR_ADMIN_RO(available_root_port_filters);
+
+static ssize_t available_requester_filters_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev));
+ struct hisi_ptt_filter_desc *filter;
+ int pos = 0;
+
+ mutex_lock(&hisi_ptt->mutex);
+ if (list_empty(&hisi_ptt->req_filters)) {
+ pos = sysfs_emit(buf, "\n");
+ goto out;
+ }
+
+ list_for_each_entry(filter, &hisi_ptt->req_filters, list)
+ pos += sysfs_emit_at(buf, pos, "%s 0x%05x\n",
+ pci_name(filter->pdev),
+ hisi_ptt_get_filter_val(filter->pdev));
+
+out:
+ mutex_unlock(&hisi_ptt->mutex);
+ return pos;
+}
+static DEVICE_ATTR_ADMIN_RO(available_requester_filters);
+
+PMU_FORMAT_ATTR(filter, "config:0-19");
+PMU_FORMAT_ATTR(direction, "config:20-23");
+PMU_FORMAT_ATTR(type, "config:24-31");
+PMU_FORMAT_ATTR(format, "config:32-35");
+
+static struct attribute *hisi_ptt_pmu_format_attrs[] = {
+ &format_attr_filter.attr,
+ &format_attr_direction.attr,
+ &format_attr_type.attr,
+ &format_attr_format.attr,
+ NULL
+};
+
+static struct attribute_group hisi_ptt_pmu_format_group = {
+ .name = "format",
+ .attrs = hisi_ptt_pmu_format_attrs,
+};
+
+static struct attribute *hisi_ptt_pmu_filter_attrs[] = {
+ &dev_attr_available_root_port_filters.attr,
+ &dev_attr_available_requester_filters.attr,
+ NULL
+};
+
+static struct attribute_group hisi_ptt_pmu_filter_group = {
+ .attrs = hisi_ptt_pmu_filter_attrs,
+};
+
+static const struct attribute_group *hisi_ptt_pmu_groups[] = {
+ &hisi_ptt_pmu_format_group,
+ &hisi_ptt_pmu_filter_group,
+ NULL
+};
+
+/*
+ * Check whether the config is valid or not. Some configs are multi-selectable
+ * and can be set simultaneously, while some are single selectable (onehot).
+ * Use this function to check the non-onehot configs while
+ * hisi_ptt_trace_valid_config_onehot() for the onehot ones.
+ */
+static int hisi_ptt_trace_valid_config(u32 val, const u32 *available_list, u32 list_size)
+{
+ int i;
+
+ /* The non-onehot configs cannot be 0. */
+ if (!val)
+ return -EINVAL;
+
+ /*
+ * Walk the available list and clear the valid bits of
+ * the config. If there is any resident bit after the
+ * walk then the config is invalid.
+ */
+ for (i = 0; i < list_size; i++)
+ val &= ~available_list[i];
+
+ return val ? -EINVAL : 0;
+}
+
+static int hisi_ptt_trace_valid_config_onehot(u32 val, const u32 *available_list, u32 list_size)
+{
+ int i;
+
+ for (i = 0; i < list_size; i++)
+ if (val == available_list[i])
+ return 0;
+
+ return -EINVAL;
+}
+
+static int hisi_ptt_trace_init_filter(struct hisi_ptt *hisi_ptt, u64 config)
+{
+ unsigned long val, port_mask = hisi_ptt->port_mask;
+ struct hisi_ptt_filter_desc *filter;
+ int ret = -EINVAL;
+
+ hisi_ptt->trace_ctrl.is_port = FIELD_GET(HISI_PTT_PMU_FILTER_IS_PORT, config);
+ val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, config);
+
+ /*
+ * Port filters are defined as bit mask. For port filters, check
+ * the bits in the @val are within the range of hisi_ptt->port_mask
+ * and whether it's empty or not, otherwise user has specified
+ * some unsupported root ports.
+ *
+ * For Requester ID filters, walk the available filter list to see
+ * whether we have one matched.
+ */
+ if (!hisi_ptt->trace_ctrl.is_port) {
+ list_for_each_entry(filter, &hisi_ptt->req_filters, list)
+ if (val == hisi_ptt_get_filter_val(filter->pdev)) {
+ ret = 0;
+ break;
+ }
+ } else if (bitmap_subset(&val, &port_mask, BITS_PER_LONG)) {
+ ret = 0;
+ }
+
+ if (ret)
+ return ret;
+
+ hisi_ptt->trace_ctrl.filter = val;
+ return 0;
+}
+
+static int hisi_ptt_pmu_event_init(struct perf_event *event)
+{
+ /*
+ * The supported value of the direction parameter. See hisi_ptt.rst
+ * documentation for more details.
+ */
+ static const u32 hisi_ptt_trace_available_direction[] = {
+ 0,
+ 1,
+ 2,
+ 3,
+ };
+ /* Different types can be set simultaneously */
+ static const u32 hisi_ptt_trace_available_type[] = {
+ 1, /* posted_request */
+ 2, /* non-posted_request */
+ 4, /* completion */
+ };
+ static const u32 hisi_ptt_trace_availble_format[] = {
+ 0, /* 4DW */
+ 1, /* 8DW */
+ };
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ int ret;
+ u32 val;
+
+ if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type)
+ return -ENOENT;
+
+ mutex_lock(&hisi_ptt->mutex);
+
+ ret = hisi_ptt_trace_init_filter(hisi_ptt, event->attr.config);
+ if (ret < 0)
+ goto out;
+
+ val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config);
+ ret = hisi_ptt_trace_valid_config_onehot(val, hisi_ptt_trace_available_direction,
+ ARRAY_SIZE(hisi_ptt_trace_available_direction));
+ if (ret < 0)
+ goto out;
+ ctrl->direction = val;
+
+ val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config);
+ ret = hisi_ptt_trace_valid_config(val, hisi_ptt_trace_available_type,
+ ARRAY_SIZE(hisi_ptt_trace_available_type));
+ if (ret < 0)
+ goto out;
+ ctrl->type = val;
+
+ val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config);
+ ret = hisi_ptt_trace_valid_config_onehot(val, hisi_ptt_trace_availble_format,
+ ARRAY_SIZE(hisi_ptt_trace_availble_format));
+ if (ret < 0)
+ goto out;
+ ctrl->format = val;
+
+out:
+ mutex_unlock(&hisi_ptt->mutex);
+ return ret;
+}
+
+static void *hisi_ptt_pmu_setup_aux(struct perf_event *event, void **pages,
+ int nr_pages, bool overwrite)
+{
+ struct hisi_ptt_pmu_buf *buf;
+ struct page **pagelist;
+ int i;
+
+ if (overwrite) {
+ dev_warn(event->pmu->dev, "Overwrite mode is not supported\n");
+ return NULL;
+ }
+
+ /* If the pages size less than buffers, we cannot start trace */
+ if (nr_pages < HISI_PTT_TRACE_TOTAL_BUF_SIZE / PAGE_SIZE)
+ return NULL;
+
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return NULL;
+
+ pagelist = kcalloc(nr_pages, sizeof(*pagelist), GFP_KERNEL);
+ if (!pagelist) {
+ kfree(buf);
+ return NULL;
+ }
+
+ for (i = 0; i < nr_pages; i++)
+ pagelist[i] = virt_to_page(pages[i]);
+
+ buf->base = vmap(pagelist, nr_pages, VM_MAP, PAGE_KERNEL);
+ if (!buf->base) {
+ kfree(pagelist);
+ kfree(buf);
+ return NULL;
+ }
+
+ buf->nr_pages = nr_pages;
+ buf->length = nr_pages * PAGE_SIZE;
+ buf->pos = 0;
+
+ kfree(pagelist);
+ return buf;
+}
+
+static void hisi_ptt_pmu_free_aux(void *aux)
+{
+ struct hisi_ptt_pmu_buf *buf = aux;
+
+ vunmap(buf->base);
+ kfree(buf);
+}
+
+static void hisi_ptt_pmu_start(struct perf_event *event, int flags)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle;
+ struct hw_perf_event *hwc = &event->hw;
+ struct hisi_ptt_pmu_buf *buf;
+ int cpu = event->cpu;
+ int ret;
+
+ hwc->state = 0;
+ mutex_lock(&hisi_ptt->mutex);
+ if (hisi_ptt->trace_ctrl.started) {
+ pci_dbg(hisi_ptt->pdev, "trace has already started\n");
+ goto stop;
+ }
+
+ if (cpu == -1)
+ cpu = hisi_ptt->trace_ctrl.default_cpu;
+
+ /*
+ * Handle the interrupt on the same cpu which starts the trace to avoid
+ * context mismatch. Otherwise we'll trigger the WARN from the perf
+ * core in event_function_local().
+ */
+ WARN_ON(irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ),
+ cpumask_of(cpu)));
+
+ ret = hisi_ptt_alloc_trace_buf(hisi_ptt);
+ if (ret) {
+ pci_dbg(hisi_ptt->pdev, "alloc trace buf failed, ret = %d\n", ret);
+ goto stop;
+ }
+
+ buf = perf_aux_output_begin(handle, event);
+ if (!buf) {
+ pci_dbg(hisi_ptt->pdev, "aux output begin failed\n");
+ goto stop;
+ }
+
+ buf->pos = handle->head % buf->length;
+
+ ret = hisi_ptt_trace_start(hisi_ptt);
+ if (ret) {
+ pci_dbg(hisi_ptt->pdev, "trace start failed, ret = %d\n", ret);
+ perf_aux_output_end(handle, 0);
+ goto stop;
+ }
+
+ mutex_unlock(&hisi_ptt->mutex);
+ return;
+stop:
+ event->hw.state |= PERF_HES_STOPPED;
+ mutex_unlock(&hisi_ptt->mutex);
+}
+
+static void hisi_ptt_pmu_stop(struct perf_event *event, int flags)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
+
+ mutex_lock(&hisi_ptt->mutex);
+ if (hisi_ptt->trace_ctrl.started) {
+ hisi_ptt_trace_end(hisi_ptt);
+ WARN(!hisi_ptt_wait_trace_hw_idle(hisi_ptt), "Device is still busy");
+ hisi_ptt_update_aux(hisi_ptt, hisi_ptt->trace_ctrl.buf_index, true);
+ }
+ mutex_unlock(&hisi_ptt->mutex);
+
+ hwc->state |= PERF_HES_STOPPED;
+ perf_event_update_userpage(event);
+ hwc->state |= PERF_HES_UPTODATE;
+}
+
+static int hisi_ptt_pmu_add(struct perf_event *event, int flags)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int cpu = event->cpu;
+
+ /*
+ * Only allow the default cpu to add the event if user doesn't specify
+ * the cpus.
+ */
+ if (cpu == -1 && smp_processor_id() != hisi_ptt->trace_ctrl.default_cpu)
+ return 0;
+
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+ if (flags & PERF_EF_START) {
+ hisi_ptt_pmu_start(event, PERF_EF_RELOAD);
+ if (hwc->state & PERF_HES_STOPPED)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void hisi_ptt_pmu_del(struct perf_event *event, int flags)
+{
+ hisi_ptt_pmu_stop(event, PERF_EF_UPDATE);
+}
+
+static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt)
+{
+ u16 core_id, sicl_id;
+ char *pmu_name;
+ u32 reg;
+
+ hisi_ptt->hisi_ptt_pmu = (struct pmu) {
+ .module = THIS_MODULE,
+ .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
+ .task_ctx_nr = perf_sw_context,
+ .attr_groups = hisi_ptt_pmu_groups,
+ .event_init = hisi_ptt_pmu_event_init,
+ .setup_aux = hisi_ptt_pmu_setup_aux,
+ .free_aux = hisi_ptt_pmu_free_aux,
+ .start = hisi_ptt_pmu_start,
+ .stop = hisi_ptt_pmu_stop,
+ .add = hisi_ptt_pmu_add,
+ .del = hisi_ptt_pmu_del,
+ };
+
+ reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
+ core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
+ sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
+
+ pmu_name = devm_kasprintf(&hisi_ptt->pdev->dev, GFP_KERNEL, "hisi_ptt%u_%u",
+ sicl_id, core_id);
+ if (!pmu_name)
+ return -ENOMEM;
+
+ return perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1);
+}
+
+/*
+ * The DMA of PTT trace can only use direct mapping, due to some
+ * hardware restriction. Check whether there is an IOMMU or the
+ * policy of the IOMMU domain is passthrough, otherwise the trace
+ * cannot work.
+ *
+ * The PTT device is supposed to behind the ARM SMMUv3, which
+ * should have passthrough the device by a quirk.
+ */
+static int hisi_ptt_check_iommu_mapping(struct pci_dev *pdev)
+{
+ struct iommu_domain *iommu_domain;
+
+ iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
+ if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
+ return 0;
+
+ return -EOPNOTSUPP;
+}
+
+static int hisi_ptt_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct hisi_ptt *hisi_ptt;
+ int ret;
+
+ ret = hisi_ptt_check_iommu_mapping(pdev);
+ if (ret) {
+ pci_err(pdev, "requires direct DMA mappings\n");
+ return ret;
+ }
+
+ hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
+ if (!hisi_ptt)
+ return -ENOMEM;
+
+ mutex_init(&hisi_ptt->mutex);
+ hisi_ptt->pdev = pdev;
+ pci_set_drvdata(pdev, hisi_ptt);
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ pci_err(pdev, "failed to enable device, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = pcim_iomap_regions(pdev, BIT(2), DRV_NAME);
+ if (ret) {
+ pci_err(pdev, "failed to remap io memory, ret = %d\n", ret);
+ return ret;
+ }
+
+ hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
+
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (ret) {
+ pci_err(pdev, "failed to set 64 bit dma mask, ret = %d\n", ret);
+ return ret;
+ }
+
+ pci_set_master(pdev);
+
+ ret = hisi_ptt_register_irq(hisi_ptt);
+ if (ret)
+ return ret;
+
+ ret = hisi_ptt_init_ctrls(hisi_ptt);
+ if (ret) {
+ pci_err(pdev, "failed to init controls, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = hisi_ptt_register_pmu(hisi_ptt);
+ if (ret) {
+ pci_err(pdev, "failed to register PMU device, ret = %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void hisi_ptt_remove(struct pci_dev *pdev)
+{
+ struct hisi_ptt *hisi_ptt = pci_get_drvdata(pdev);
+
+ /*
+ * We have to manually unregister the PMU device rather than make it
+ * devres managed to keep order that the PMU device's unregistration
+ * is prior to the release of DMA buffers. As the DMA buffers are
+ * devm allocated when necessary which is after the registration of
+ * the PMU device.
+ */
+ perf_pmu_unregister(&hisi_ptt->hisi_ptt_pmu);
+}
+
+static const struct pci_device_id hisi_ptt_id_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl);
+
+static struct pci_driver hisi_ptt_driver = {
+ .name = DRV_NAME,
+ .id_table = hisi_ptt_id_tbl,
+ .probe = hisi_ptt_probe,
+ .remove = hisi_ptt_remove,
+};
+module_pci_driver(hisi_ptt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yicong Yang <yangyicong@...ilicon.com>");
+MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device");
diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h
new file mode 100644
index 000000000000..29b6d6293d6c
--- /dev/null
+++ b/drivers/hwtracing/ptt/hisi_ptt.h
@@ -0,0 +1,166 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for HiSilicon PCIe tune and trace device
+ *
+ * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
+ * Author: Yicong Yang <yangyicong@...ilicon.com>
+ */
+
+#ifndef _HISI_PTT_H
+#define _HISI_PTT_H
+
+#include <linux/bits.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/perf_event.h>
+#include <linux/types.h>
+
+#define DRV_NAME "hisi_ptt"
+
+/*
+ * The definition of the device registers and register fields.
+ */
+#define HISI_PTT_TRACE_ADDR_SIZE 0x0800
+#define HISI_PTT_TRACE_ADDR_BASE_LO_0 0x0810
+#define HISI_PTT_TRACE_ADDR_BASE_HI_0 0x0814
+#define HISI_PTT_TRACE_ADDR_STRIDE 0x8
+#define HISI_PTT_TRACE_CTRL 0x0850
+#define HISI_PTT_TRACE_CTRL_EN BIT(0)
+#define HISI_PTT_TRACE_CTRL_RST BIT(1)
+#define HISI_PTT_TRACE_CTRL_RXTX_SEL GENMASK(3, 2)
+#define HISI_PTT_TRACE_CTRL_TYPE_SEL GENMASK(7, 4)
+#define HISI_PTT_TRACE_CTRL_DATA_FORMAT BIT(14)
+#define HISI_PTT_TRACE_CTRL_FILTER_MODE BIT(15)
+#define HISI_PTT_TRACE_CTRL_TARGET_SEL GENMASK(31, 16)
+#define HISI_PTT_TRACE_INT_STAT 0x0890
+#define HISI_PTT_TRACE_INT_STAT_MASK GENMASK(3, 0)
+#define HISI_PTT_TRACE_INT_MASK 0x0894
+#define HISI_PTT_TRACE_WR_STS 0x08a0
+#define HISI_PTT_TRACE_WR_STS_WRITE GENMASK(27, 0)
+#define HISI_PTT_TRACE_WR_STS_BUFFER GENMASK(29, 28)
+#define HISI_PTT_TRACE_STS 0x08b0
+#define HISI_PTT_TRACE_IDLE BIT(0)
+#define HISI_PTT_DEVICE_RANGE 0x0fe0
+#define HISI_PTT_DEVICE_RANGE_UPPER GENMASK(31, 16)
+#define HISI_PTT_DEVICE_RANGE_LOWER GENMASK(15, 0)
+#define HISI_PTT_LOCATION 0x0fe8
+#define HISI_PTT_CORE_ID GENMASK(15, 0)
+#define HISI_PTT_SICL_ID GENMASK(31, 16)
+
+/* Parameters of PTT trace DMA part. */
+#define HISI_PTT_TRACE_DMA_IRQ 0
+#define HISI_PTT_TRACE_BUF_CNT 4
+#define HISI_PTT_TRACE_BUF_SIZE SZ_4M
+#define HISI_PTT_TRACE_TOTAL_BUF_SIZE (HISI_PTT_TRACE_BUF_SIZE * \
+ HISI_PTT_TRACE_BUF_CNT)
+/* Wait time for hardware DMA to reset */
+#define HISI_PTT_RESET_TIMEOUT_US 10UL
+#define HISI_PTT_RESET_POLL_INTERVAL_US 1UL
+/* Poll timeout and interval for waiting hardware work to finish */
+#define HISI_PTT_WAIT_TRACE_TIMEOUT_US 100UL
+#define HISI_PTT_WAIT_POLL_INTERVAL_US 10UL
+
+#define HISI_PCIE_CORE_PORT_ID(devfn) (PCI_FUNC(devfn) << 1)
+
+/**
+ * struct hisi_ptt_dma_buffer - describe a single trace buffer of PTT trace.
+ * The detail of the data format is described
+ * in the documentation of PTT device.
+ * @dma: DMA address of this buffer visible to the device
+ * @addr: virtual address of this buffer visible to the cpu
+ */
+struct hisi_ptt_dma_buffer {
+ dma_addr_t dma;
+ void *addr;
+};
+
+/**
+ * struct hisi_ptt_trace_ctrl - control and status of PTT trace
+ * @trace_buf: array of the trace buffers for holding the trace data.
+ * the length will be HISI_PTT_TRACE_BUF_CNT.
+ * @handle: perf output handle of current trace session
+ * @default_cpu: default cpu to start the trace session
+ * @buf_index: the index of current using trace buffer
+ * @started: current trace status, true for started
+ * @is_port: whether we're tracing root port or not
+ * @direction: direction of the TLP headers to trace
+ * @filter: filter value for tracing the TLP headers
+ * @format: format of the TLP headers to trace
+ * @type: type of the TLP headers to trace
+ */
+struct hisi_ptt_trace_ctrl {
+ struct hisi_ptt_dma_buffer *trace_buf;
+ struct perf_output_handle handle;
+ int default_cpu;
+ u32 buf_index;
+ bool started;
+ bool is_port;
+ u32 direction:2;
+ u32 filter:16;
+ u32 format:1;
+ u32 type:4;
+};
+
+/**
+ * struct hisi_ptt_filter_desc - descriptor of the PTT trace filter
+ * @list: entry of this descriptor in the filter list
+ * @pdev: pci_dev related to this filter
+ */
+struct hisi_ptt_filter_desc {
+ struct list_head list;
+ struct pci_dev *pdev;
+};
+
+
+/**
+ * struct hisi_ptt_pmu_buf - descriptor of the AUX buffer of PTT trace
+ * @length: size of the AUX buffer
+ * @nr_pages: number of pages of the AUX buffer
+ * @base: start address of AUX buffer
+ * @pos: position in the AUX buffer to commit traced data
+ */
+struct hisi_ptt_pmu_buf {
+ size_t length;
+ int nr_pages;
+ void *base;
+ long pos;
+};
+
+/**
+ * struct hisi_ptt - per PTT device data
+ * @trace_ctrl: the control information of PTT trace
+ * @hisi_ptt_pmu: the pum device of trace
+ * @iobase: base IO address of the device
+ * @pdev: pci_dev of this PTT device
+ * @mutex: mutex to protect the filter list and serialize the perf process.
+ * @upper: the upper BDF range of the PCI devices managed by this PTT device
+ * @lower: the lower BDF range of the PCI devices managed by this PTT device
+ * @port_filters: the filter list of root ports
+ * @req_filters: the filter list of requester ID
+ * @port_mask: port mask of the managed root ports
+ */
+struct hisi_ptt {
+ struct hisi_ptt_trace_ctrl trace_ctrl;
+ struct pmu hisi_ptt_pmu;
+ void __iomem *iobase;
+ struct pci_dev *pdev;
+ struct mutex mutex;
+ u32 upper;
+ u32 lower;
+
+ /*
+ * The trace TLP headers can either be filtered by certain
+ * root port, or by the requester ID. Organize the filters
+ * by @port_filters and @req_filters here. The mask of all
+ * the valid ports is also cached for doing sanity check
+ * of user input.
+ */
+ struct list_head port_filters;
+ struct list_head req_filters;
+ u16 port_mask;
+};
+
+#define to_hisi_ptt(pmu) container_of(pmu, struct hisi_ptt, hisi_ptt_pmu)
+
+#endif /* _HISI_PTT_H */
--
2.24.0
Powered by blists - more mailing lists