Message-ID: <aaa78c1f1bfa7b8da8d8be0f3dcf2a42c9b838fd.camel@kernel.org>
Date:   Thu, 07 Apr 2022 09:23:11 -0400
From:   Jeff Layton <jlayton@...nel.org>
To:     Luís Henriques <lhenriques@...e.de>,
        Xiubo Li <xiubli@...hat.com>
Cc:     Ilya Dryomov <idryomov@...il.com>, ceph-devel@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] ceph: invalidate pages when doing DIO in encrypted
 inodes

On Thu, 2022-04-07 at 12:55 +0100, Luís Henriques wrote:
> Xiubo Li <xiubli@...hat.com> writes:
> 
> > On 4/6/22 9:41 PM, Jeff Layton wrote:
> > > On Wed, 2022-04-06 at 21:10 +0800, Xiubo Li wrote:
> > > > On 4/6/22 7:48 PM, Jeff Layton wrote:
> > > > > On Wed, 2022-04-06 at 12:33 +0100, Luís Henriques wrote:
> > > > > > Xiubo Li <xiubli@...hat.com> writes:
> > > > > > 
> > > > > > > On 4/6/22 6:57 PM, Luís Henriques wrote:
> > > > > > > > Xiubo Li <xiubli@...hat.com> writes:
> > > > > > > > 
> > > > > > > > > On 4/1/22 9:32 PM, Luís Henriques wrote:
> > > > > > > > > > When doing DIO on an encrypted node, we need to invalidate the page cache in
> > > > > > > > > > the range being written to, otherwise the cache will include invalid data.
> > > > > > > > > > 
> > > > > > > > > > Signed-off-by: Luís Henriques <lhenriques@...e.de>
> > > > > > > > > > ---
> > > > > > > > > >      fs/ceph/file.c | 11 ++++++++++-
> > > > > > > > > >      1 file changed, 10 insertions(+), 1 deletion(-)
> > > > > > > > > > 
> > > > > > > > > > Changes since v1:
> > > > > > > > > > - Replaced truncate_inode_pages_range() by invalidate_inode_pages2_range
> > > > > > > > > > - Call fscache_invalidate with FSCACHE_INVAL_DIO_WRITE if we're doing DIO
> > > > > > > > > > 
> > > > > > > > > > Note: I'm not really sure this last change is required, it doesn't really
> > > > > > > > > > affect generic/647 result, but seems to be the most correct.
> > > > > > > > > > 
> > > > > > > > > > diff --git a/fs/ceph/file.c b/fs/ceph/file.c
> > > > > > > > > > index 5072570c2203..b2743c342305 100644
> > > > > > > > > > --- a/fs/ceph/file.c
> > > > > > > > > > +++ b/fs/ceph/file.c
> > > > > > > > > > @@ -1605,7 +1605,7 @@ ceph_sync_write(struct kiocb *iocb, struct iov_iter *from, loff_t pos,
> > > > > > > > > >      	if (ret < 0)
> > > > > > > > > >      		return ret;
> > > > > > > > > >      -	ceph_fscache_invalidate(inode, false);
> > > > > > > > > > +	ceph_fscache_invalidate(inode, (iocb->ki_flags & IOCB_DIRECT));
> > > > > > > > > >      	ret = invalidate_inode_pages2_range(inode->i_mapping,
> > > > > > > > > >      					    pos >> PAGE_SHIFT,
> > > > > > > > > >      					    (pos + count - 1) >> PAGE_SHIFT);
> > > > > > > > > The above has already invalidated the pages, why doesn't it work ?
> > > > > > > > I suspect the reason is because later on we loop through the number of
> > > > > > > > pages, call copy_page_from_iter() and then ceph_fscrypt_encrypt_pages().
> > > > > > > Checked the 'copy_page_from_iter()', it will do the kmap for the pages but will
> > > > > > > kunmap them again later. And they shouldn't update the i_mapping if I didn't
> > > > > > > miss something important.
> > > > > > > 
> > > > > > > For 'ceph_fscrypt_encrypt_pages()' it will encrypt/dencrypt the context inplace,
> > > > > > > IMO if it needs to map the page and it should also unmap it just like in
> > > > > > > 'copy_page_from_iter()'.
> > > > > > > 
> > > > > > > I thought it possibly be when we need to do RMW, it may will update the
> > > > > > > i_mapping when reading contents, but I checked the code didn't find any
> > > > > > > place is doing this. So I am wondering where tha page caches come from ? If that
> > > > > > > page caches really from reading the contents, then we should discard it instead
> > > > > > > of flushing it back ?
> > > > > > > 
> > > > > > > BTW, what's the problem without this fixing ? xfstest fails ?
> > > > > > Yes, generic/647 fails if you run it with test_dummy_encryption.  And I've
> > > > > > also checked that the RMW code was never executed in this test.
> > > > > > 
> > > > > > But yeah I have assumed (perhaps wrongly) that the kmap/kunmap could
> > > > > > change the inode->i_mapping.
> > > > > > 
> > > > > No, kmap/unmap are all about high memory and 32-bit architectures. Those
> > > > > functions are usually no-ops on 64-bit arches.
> > > > Yeah, right.
> > > > 
> > > > So they do nothing here.
> > > > 
> > > > > > In my debugging this seemed to be the case
> > > > > > for the O_DIRECT path.  That's why I added this extra call here.
> > > > > > 
> > > > > I agree with Xiubo that we really shouldn't need to invalidate multiple
> > > > > times.
> > > > > 
> > > > > I guess in this test, we have a DIO write racing with an mmap read
> > > > > Probably what's happening is either that we can't invalidate the page
> > > > > because it needs to be cleaned, or the mmap read is racing in just after
> > > > > the invalidate occurs but before writeback.
> > > > This sounds a possible case.
> > > > 
> > > > 
> > > > > In any case, it might be interesting to see whether you're getting
> > > > > -EBUSY back from the new invalidate_inode_pages2 calls with your patch.
> > > > > 
> > > > If it's really this case maybe this should be retried some where ?
> > > > 
> > > Possibly, or we may need to implement ->launder_folio.
> > > 
> > > Either way, we need to understand what's happening first and then we can
> > > figure out a solution for it.
> > 
> > Yeah, make sense.
> > 
> 
> OK, so here's what I got so far:
> 
> When we run this test *without* test_dummy_encryption, ceph_direct_read_write()
> will be called and invalidate_inode_pages2_range() will do pretty much
> nothing because the mapping will be empty (mapping_empty(inode->i_mapping)
> will return 1).  If we use encryption, ceph_sync_write() will be called
> instead and the mapping, obviously, be will be empty as well.
> 
> The difference between in encrypted vs non-encrypted (and the reason the
> test passes without encryption) is that ceph_direct_read_write()
> (non-encrypted) will call truncate_inode_pages_range() at a stage where
> the mapping is not empty anymore (iter_get_bvecs_alloc will take care of
> that).
> 

Wait...why does iter_get_bvecs_alloc populate the mapping? The iter in
this case is almost certainly an iov_iter from userland so none of this
should have anything to do with the pagecache.

I suspect the faulting in occurs via the mmap reader task, and that the
truncate_inode_pages_range calls just happen enough to invalidate it.

>  In the encryption path (ceph_sync_write) the mapping will be
> filled with copy_page_from_iter(), which will fault and do the read.
> Because we don't have the truncate_inode_pages_range(), the cache will
> contain invalid data after the write.  And that's why the extra
> invalidate_inode_pages2_range (or truncate_...) fixes this.
> 

I think what we may want to do is consider adding these calls into
ceph_page_mkwrite:

        if (direct_lock)
                ceph_start_io_direct(inode);
        else
                ceph_start_io_write(inode);

...and similar ones (for read) in ceph_filemap_fault, along with "end"
calls to end the I/Os.

This is how we handle races between buffered read/write and direct I/O,
and I suspect the mmap codepaths may just need similar treatment.

Thoughts?
-- 
Jeff Layton <jlayton@...nel.org>

Powered by blists - more mailing lists