| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220407143155.295187-2-krzysztof.kozlowski@linaro.org>
Date: Thu, 7 Apr 2022 16:31:55 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Li Yang <leoyang.li@....com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/2] arm64: dts: freescale: align SPI NOR node name with dtschema
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi | 2 +-
.../boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 2 +-
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe091965..6fab73d484b6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -104,21 +104,21 @@ &i2c3 {
&dspi {
status = "okay";
- dflash0: n25q128a@0 {
+ dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
- dflash1: sst25wf040b@1 {
+ dflash1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
- dflash2: en25s64@2 {
+ dflash2: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
@@ -129,7 +129,7 @@ dflash2: en25s64@2 {
&qspi {
status = "okay";
- flash0: s25fl256s1@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
@@ -138,7 +138,7 @@ flash0: s25fl256s1@0 {
spi-tx-bus-width = <4>;
reg = <0>;
};
- flash2: s25fl256s1@2 {
+ flash2: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4fcb35f..f8135c5c252d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -100,7 +100,7 @@ &i2c3 {
&dspi {
status = "okay";
- dflash0: n25q512a@0 {
+ dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
index 7c4af71baab9..0dbdc9ec3fe5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -98,7 +98,7 @@ &flexspi {
pinctrl-1 = <&pinctrl_flexspi1>;
status = "okay";
- flash0: spi-flash@0 {
+ flash0: flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 22a5ef771d4e..8f90eb02550d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -66,7 +66,7 @@ &ecspi1 {
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
spi-max-frequency = <80000000>;
reg = <0>;
--
2.32.0
Powered by blists - more mailing lists