| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220407075726.17771-30-yong.wu@mediatek.com>
Date: Thu, 7 Apr 2022 15:57:21 +0800
From: Yong Wu <yong.wu@...iatek.com>
To: Joerg Roedel <joro@...tes.org>, Rob Herring <robh+dt@...nel.org>,
"Matthias Brugger" <matthias.bgg@...il.com>,
Will Deacon <will@...nel.org>
CC: Robin Murphy <robin.murphy@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Tomasz Figa <tfiga@...omium.org>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<iommu@...ts.linux-foundation.org>,
Hsin-Yi Wang <hsinyi@...omium.org>, <yong.wu@...iatek.com>,
<youlin.pei@...iatek.com>, <anan.sun@...iatek.com>,
<xueqi.zhang@...iatek.com>, <yen-chang.chen@...iatek.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@...labora.com>,
<mingyuan.ma@...iatek.com>, <yf.wang@...iatek.com>,
<libo.kang@...iatek.com>, <chengci.xu@...iatek.com>
Subject: [PATCH v6 29/34] iommu/mediatek: Initialise bank HW for each a bank
The mt8195 IOMMU HW max support 5 banks, and regarding the banks'
registers, it looks like:
----------------------------------------
|bank0 | bank1 | bank2 | bank3 | bank4|
----------------------------------------
|global |
|control| null
|regs |
-----------------------------------------
|bank |bank |bank |bank |bank |
|regs |regs |regs |regs |regs |
| | | | | |
-----------------------------------------
Each bank has some special bank registers and it share bank0's global
control registers. this patch initialise the bank hw with the bankid.
In the hw_init, we always initialise bank0's control register since
we don't know if the bank0 is initialised.
Additionally, About each bank's register base, always delta 0x1000.
like bank[x + 1] = bank[x] + 0x1000.
Signed-off-by: Yong Wu <yong.wu@...iatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
drivers/iommu/mtk_iommu.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index f2a29399f10f..9c27b99ca0cd 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -259,7 +259,7 @@ static void mtk_iommu_unbind(struct device *dev)
static const struct iommu_ops mtk_iommu_ops;
-static int mtk_iommu_hw_init(const struct mtk_iommu_data *data);
+static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int bankid);
#define MTK_IOMMU_TLB_ADDR(iova) ({ \
dma_addr_t _addr = iova; \
@@ -642,12 +642,14 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
mutex_lock(&data->mutex);
bank = &data->bank[bankid];
- if (!bank->m4u_dom) { /* Initialize the M4U HW */
+ if (!bank->m4u_dom) { /* Initialize the M4U HW for each a BANK */
ret = pm_runtime_resume_and_get(m4udev);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(m4udev, "pm get fail(%d) in attach.\n", ret);
goto err_unlock;
+ }
- ret = mtk_iommu_hw_init(data);
+ ret = mtk_iommu_hw_init(data, bankid);
if (ret) {
pm_runtime_put(m4udev);
goto err_unlock;
@@ -897,11 +899,16 @@ static const struct iommu_ops mtk_iommu_ops = {
}
};
-static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
+static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int bankid)
{
+ const struct mtk_iommu_bank_data *bankx = &data->bank[bankid];
const struct mtk_iommu_bank_data *bank0 = &data->bank[0];
u32 regval;
+ /*
+ * Global control settings are in bank0. May re-init these global registers
+ * since no sure if there is bank0 consumers.
+ */
if (data->plat_data->m4u_plat == M4U_MT8173) {
regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
@@ -944,13 +951,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
}
writel_relaxed(regval, bank0->base + REG_MMU_MISC_CTRL);
+ /* Independent settings for each bank */
regval = F_L2_MULIT_HIT_EN |
F_TABLE_WALK_FAULT_INT_EN |
F_PREETCH_FIFO_OVERFLOW_INT_EN |
F_MISS_FIFO_OVERFLOW_INT_EN |
F_PREFETCH_FIFO_ERR_INT_EN |
F_MISS_FIFO_ERR_INT_EN;
- writel_relaxed(regval, bank0->base + REG_MMU_INT_CONTROL0);
+ writel_relaxed(regval, bankx->base + REG_MMU_INT_CONTROL0);
regval = F_INT_TRANSLATION_FAULT |
F_INT_MAIN_MULTI_HIT_FAULT |
@@ -959,19 +967,19 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
F_INT_TLB_MISS_FAULT |
F_INT_MISS_TRANSACTION_FIFO_FAULT |
F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
- writel_relaxed(regval, bank0->base + REG_MMU_INT_MAIN_CONTROL);
+ writel_relaxed(regval, bankx->base + REG_MMU_INT_MAIN_CONTROL);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
else
regval = lower_32_bits(data->protect_base) |
upper_32_bits(data->protect_base);
- writel_relaxed(regval, bank0->base + REG_MMU_IVRP_PADDR);
+ writel_relaxed(regval, bankx->base + REG_MMU_IVRP_PADDR);
- if (devm_request_irq(bank0->parent_dev, bank0->irq, mtk_iommu_isr, 0,
- dev_name(bank0->parent_dev), (void *)bank0)) {
- writel_relaxed(0, bank0->base + REG_MMU_PT_BASE_ADDR);
- dev_err(bank0->parent_dev, "Failed @ IRQ-%d Request\n", bank0->irq);
+ if (devm_request_irq(bankx->parent_dev, bankx->irq, mtk_iommu_isr, 0,
+ dev_name(bankx->parent_dev), (void *)bankx)) {
+ writel_relaxed(0, bankx->base + REG_MMU_PT_BASE_ADDR);
+ dev_err(bankx->parent_dev, "Failed @ IRQ-%d Request\n", bankx->irq);
return -ENODEV;
}
--
2.18.0
Powered by blists - more mailing lists