| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1649321104-31322-2-git-send-email-quic_c_sanm@quicinc.com>
Date: Thu, 7 Apr 2022 14:14:59 +0530
From: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
To: Rob Herring <robh+dt@...nel.org>, Andy Gross <agross@...nel.org>,
"Bjorn Andersson" <bjorn.andersson@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
"Matthias Kaehlcke" <mka@...omium.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_pkondeti@...cinc.com>, <quic_ppratap@...cinc.com>,
<quic_kriskura@...cinc.com>, <quic_vpulyala@...cinc.com>,
Sandeep Maheswaram <quic_c_sanm@...cinc.com>
Subject: [PATCH v12 1/6] usb: dwc3: core: Host wake up support from system suspend
During suspend read the status of all port and set hs phy mode
based on current speed. Use this hs phy mode to configure wakeup
interrupts in qcom glue driver.
Also check during suspend if any wakeup capable devices are
connected to the controller (directly or through hubs), if there
are none set a flag to indicate that the PHY is powered
down during suspend.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
---
drivers/usb/dwc3/core.c | 29 ++++++++++++++++++++---------
drivers/usb/dwc3/core.h | 4 ++++
drivers/usb/dwc3/host.c | 25 +++++++++++++++++++++++++
3 files changed, 49 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1170b80..b102a22 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -32,6 +32,7 @@
#include <linux/usb/gadget.h>
#include <linux/usb/of.h>
#include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
#include "core.h"
#include "gadget.h"
@@ -1723,6 +1724,7 @@ static int dwc3_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dwc);
dwc3_cache_hwparams(dwc);
+ device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source"));
spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);
@@ -1865,6 +1867,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
u32 reg;
+ struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci);
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1877,10 +1880,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
- if (!PMSG_IS_AUTO(msg)) {
- dwc3_core_exit(dwc);
- break;
- }
+ dwc3_set_phy_speed_mode(dwc);
/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
@@ -1896,6 +1896,16 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+
+ if (!PMSG_IS_AUTO(msg)) {
+ if (device_may_wakeup(dwc->dev) &&
+ usb_wakeup_enabled_descendants(hcd->self.root_hub)) {
+ dwc->phy_power_off = false;
+ } else {
+ dwc->phy_power_off = true;
+ dwc3_core_exit(dwc);
+ }
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* do nothing during runtime_suspend */
@@ -1939,11 +1949,12 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
case DWC3_GCTL_PRTCAP_HOST:
if (!PMSG_IS_AUTO(msg)) {
- ret = dwc3_core_init_for_resume(dwc);
- if (ret)
- return ret;
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
- break;
+ if (dwc->phy_power_off) {
+ ret = dwc3_core_init_for_resume(dwc);
+ if (ret)
+ return ret;
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+ }
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5c9d467..de58995 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1154,6 +1154,9 @@ struct dwc3 {
bool phys_ready;
+ unsigned int hs_phy_mode;
+ bool phy_power_off;
+
struct ulpi *ulpi;
bool ulpi_ready;
@@ -1537,6 +1540,7 @@ int dwc3_core_soft_reset(struct dwc3 *dwc);
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
void dwc3_host_exit(struct dwc3 *dwc);
+void dwc3_set_phy_speed_mode(struct dwc3 *dwc);
#else
static inline int dwc3_host_init(struct dwc3 *dwc)
{ return 0; }
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index eda8719..74e7d92 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include "core.h"
+#include "../host/xhci.h"
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
int irq, char *name)
@@ -138,3 +139,27 @@ void dwc3_host_exit(struct dwc3 *dwc)
{
platform_device_unregister(dwc->xhci);
}
+
+void dwc3_set_phy_speed_mode(struct dwc3 *dwc)
+{
+
+ int i, num_ports;
+ u32 reg;
+ struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci);
+ struct xhci_hcd *xhci_hcd = hcd_to_xhci(hcd);
+
+ dwc->hs_phy_mode = 0;
+
+ reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+
+ num_ports = HCS_MAX_PORTS(reg);
+ for (i = 0; i < num_ports; i++) {
+ reg = readl(&xhci_hcd->op_regs->port_status_base + i * NUM_PORT_REGS);
+ if (reg & PORT_PE) {
+ if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+ dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+ else if (DEV_LOWSPEED(reg))
+ dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+ }
+ }
+}
--
2.7.4
Powered by blists - more mailing lists