linux-kernel - [PATCH 2/3] serial: stm32: add KGDB support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220407123109.132035-3-valentin.caron@foss.st.com>
Date:   Thu, 7 Apr 2022 14:31:08 +0200
From:   Valentin Caron <valentin.caron@...s.st.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jonathan Corbet <corbet@....net>
CC:     Jiri Slaby <jirislaby@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Erwan Le Ray <erwan.leray@...s.st.com>,
        Valentin Caron <valentin.caron@...s.st.com>,
        <linux-serial@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>
Subject: [PATCH 2/3] serial: stm32: add KGDB support

Add support for KGDB in stm32 serial driver by implementing characters
polling callbacks (poll_init, poll_get_char and poll_put_char).

Signed-off-by: Erwan Le Ray <erwan.leray@...s.st.com>
Signed-off-by: Jean Philippe Romain <jean-philippe.romain@...s.st.com>
Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
 drivers/tty/serial/stm32-usart.c | 38 ++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 83895da84891..d2cf789c7997 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -37,6 +37,7 @@
 
 static void stm32_usart_stop_tx(struct uart_port *port);
 static void stm32_usart_transmit_chars(struct uart_port *port);
+static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch);
 
 static inline struct stm32_port *to_stm32_port(struct uart_port *port)
 {
@@ -1222,6 +1223,34 @@ static void stm32_usart_pm(struct uart_port *port, unsigned int state,
 	}
 }
 
+#if defined(CONFIG_CONSOLE_POLL)
+
+ /* Callbacks for characters polling in debug context (i.e. KGDB). */
+static int stm32_usart_poll_init(struct uart_port *port)
+{
+	struct stm32_port *stm32_port = to_stm32_port(port);
+
+	return clk_prepare_enable(stm32_port->clk);
+}
+
+static int stm32_usart_poll_get_char(struct uart_port *port)
+{
+	struct stm32_port *stm32_port = to_stm32_port(port);
+	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+	unsigned int ret;
+
+	if (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_RXNE))
+		return NO_POLL_CHAR;
+
+	return readl_relaxed(port->membase + ofs->rdr) & stm32_port->rdr_mask;
+}
+
+static void stm32_usart_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+	stm32_usart_console_putchar(port, ch);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
 static const struct uart_ops stm32_uart_ops = {
 	.tx_empty	= stm32_usart_tx_empty,
 	.set_mctrl	= stm32_usart_set_mctrl,
@@ -1243,6 +1272,11 @@ static const struct uart_ops stm32_uart_ops = {
 	.request_port	= stm32_usart_request_port,
 	.config_port	= stm32_usart_config_port,
 	.verify_port	= stm32_usart_verify_port,
+#if defined(CONFIG_CONSOLE_POLL)
+	.poll_init      = stm32_usart_poll_init,
+	.poll_get_char	= stm32_usart_poll_get_char,
+	.poll_put_char	= stm32_usart_poll_put_char,
+#endif /* CONFIG_CONSOLE_POLL */
 };
 
 /*
@@ -1640,8 +1674,7 @@ static int stm32_usart_serial_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_SERIAL_STM32_CONSOLE
-static void stm32_usart_console_putchar(struct uart_port *port, unsigned char ch)
+static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch)
 {
 	struct stm32_port *stm32_port = to_stm32_port(port);
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
@@ -1658,6 +1691,7 @@ static void stm32_usart_console_putchar(struct uart_port *port, unsigned char ch
 	writel_relaxed(ch, port->membase + ofs->tdr);
 }
 
+#ifdef CONFIG_SERIAL_STM32_CONSOLE
 static void stm32_usart_console_write(struct console *co, const char *s,
 				      unsigned int cnt)
 {
-- 
2.25.1