[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <09fd563f-4a2c-f670-51c2-0e5ff023816d@quicinc.com>
Date: Fri, 8 Apr 2022 13:30:43 -0700
From: Kuogee Hsieh <quic_khsieh@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
<robdclark@...il.com>, <sean@...rly.run>, <swboyd@...omium.org>,
<vkoul@...nel.org>, <daniel@...ll.ch>, <airlied@...ux.ie>,
<agross@...nel.org>, <bjorn.andersson@...aro.org>
CC: <quic_abhinavk@...cinc.com>, <quic_aravindh@...cinc.com>,
<quic_sbillaka@...cinc.com>, <freedreno@...ts.freedesktop.org>,
<dri-devel@...ts.freedesktop.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] drm/msm/dp: enhance both connect and disconnect
pending_timeout handle
On 4/8/2022 5:27 AM, Dmitry Baryshkov wrote:
> On 07/04/2022 00:28, Kuogee Hsieh wrote:
>> dp_hpd_plug_handle() is responsible for setting up main link and send
>> uevent to notify user space framework to start video stream. Similarly,
>> dp_hdp_unplug_handle is responsible to send uevent to notify user space
>> framework to stop video stream and then tear down main link.
>> However there are rare cases, such as in the middle of system
>> suspending,
>> that uevent could not be delivered to user space framework. Therefore
>> some kind of recover mechanism armed by timer need to be in place in the
>> case of user space framework does not respond to uevent.
>
> Hmm, how does userpsace 'respond' to the uevent? The driver should
> send hotplug notifications to userspace, but it must not expect any
> particular reaction. The userspace might be as simple, as fbdev
> emulation, but the driver still should function correctly.
yes, driver is function correctly by setting up main link. but it does
not know which resolution to display.
It send hotplug notification through uevent to framework after main link
is ready.
Framework is responsible to set up MDP timing engine to start video stream.
However it does not know which
>
>> This patch have both dp_conenct_pending_timeout and
>> dp_disconnect_pending_timeout are used to stop video stream and tear
>> down
>> main link and eventually restore DP driver state to known default
>> DISCONNECTED state in the case of timer fired due to framework does not
>> respond to uevent so that DP driver can recover itself gracefully at
>> next
>> dongle unplug followed by plugin event.
>>
>> Changes in v2:
>> -- replace dp_display_usbpd_disconnect_cb with
>> dp_display_notify_disconnect
>>
>> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on
>> Snapdragon Chipsets")
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
>> ---
>> drivers/gpu/drm/msm/dp/dp_ctrl.c | 36 ++++++++++++++++++++-----
>> drivers/gpu/drm/msm/dp/dp_ctrl.h | 1 +
>> drivers/gpu/drm/msm/dp/dp_display.c | 54
>> ++++++++++++++++++++++++++++---------
>> 3 files changed, 72 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> index dcd0126..48990fb 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
>> @@ -1910,15 +1910,12 @@ int dp_ctrl_off_link_stream(struct dp_ctrl
>> *dp_ctrl)
>> return ret;
>> }
>> -int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
>> +int dp_ctrl_off_link(struct dp_ctrl *dp_ctrl)
>> {
>> struct dp_ctrl_private *ctrl;
>> struct dp_io *dp_io;
>> struct phy *phy;
>> - int ret = 0;
>> -
>> - if (!dp_ctrl)
>> - return -EINVAL;
>> + int ret;
>> ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> dp_io = &ctrl->parser->io;
>> @@ -1926,7 +1923,34 @@ int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
>> dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
>> - dp_catalog_ctrl_reset(ctrl->catalog);
>> + ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
>> + if (ret) {
>> + DRM_ERROR("Failed to disable link clocks. ret=%d\n", ret);
>> + }
>> +
>> + DRM_DEBUG_DP("Before, phy=%p init_count=%d power_on=%d\n",
>> + phy, phy->init_count, phy->power_count);
>> +
>> + phy_power_off(phy);
>> +
>> + DRM_DEBUG_DP("After, phy=%p init_count=%d power_on=%d\n",
>> + phy, phy->init_count, phy->power_count);
>> +
>> + return ret;
>> +}
>> +
>> +int dp_ctrl_off(struct dp_ctrl *dp_ctrl)
>> +{
>> + struct dp_ctrl_private *ctrl;
>> + struct dp_io *dp_io;
>> + struct phy *phy;
>> + int ret;
>> +
>> + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
>> + dp_io = &ctrl->parser->io;
>> + phy = dp_io->phy;
>> +
>> + dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
>> ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
>> if (ret)
>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> b/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> index 2433edb..ffafe17 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
>> @@ -22,6 +22,7 @@ struct dp_ctrl {
>> int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
>> int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
>> int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
>> +int dp_ctrl_off_link(struct dp_ctrl *dp_ctrl);
>> int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
>> void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl);
>> void dp_ctrl_isr(struct dp_ctrl *dp_ctrl);
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> index 178b774..a6200a5 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -451,11 +451,14 @@ static int dp_display_usbpd_configure_cb(struct
>> device *dev)
>> static int dp_display_usbpd_disconnect_cb(struct device *dev)
>> {
>> + return 0;
>> +}
>> +
>> +static void dp_display_notify_disconnect(struct device *dev)
>> +{
>> struct dp_display_private *dp = dev_get_dp_display_private(dev);
>> dp_add_event(dp, EV_USER_NOTIFICATION, false, 0);
>> -
>> - return 0;
>> }
>> static void dp_display_handle_video_request(struct
>> dp_display_private *dp)
>> @@ -593,10 +596,16 @@ static int dp_connect_pending_timeout(struct
>> dp_display_private *dp, u32 data)
>> mutex_lock(&dp->event_mutex);
>> + /*
>> + * main link had been setup but video is not ready yet
>> + * only tear down main link
>> + */
>> state = dp->hpd_state;
>> if (state == ST_CONNECT_PENDING) {
>> - dp->hpd_state = ST_CONNECTED;
>> DRM_DEBUG_DP("type=%d\n", dp->dp_display.connector_type);
>> + dp_ctrl_off_link(dp->ctrl);
>> + dp_display_host_phy_exit(dp);
>> + dp->hpd_state = ST_DISCONNECTED;
>> }
>> mutex_unlock(&dp->event_mutex);
>> @@ -645,6 +654,7 @@ static int dp_hpd_unplug_handle(struct
>> dp_display_private *dp, u32 data)
>> if (dp->link->sink_count == 0) {
>> dp_display_host_phy_exit(dp);
>> }
>> + dp_display_notify_disconnect(&dp->pdev->dev);
>> mutex_unlock(&dp->event_mutex);
>> return 0;
>> }
>> @@ -661,19 +671,22 @@ static int dp_hpd_unplug_handle(struct
>> dp_display_private *dp, u32 data)
>> return 0;
>> }
>> - dp->hpd_state = ST_DISCONNECT_PENDING;
>> -
>> /* disable HPD plug interrupts */
>> dp_catalog_hpd_config_intr(dp->catalog,
>> DP_DP_HPD_PLUG_INT_MASK, false);
>> /*
>> * We don't need separate work for disconnect as
>> * connect/attention interrupts are disabled
>> - */
>> - dp_display_usbpd_disconnect_cb(&dp->pdev->dev);
>> + */
>> + dp_display_notify_disconnect(&dp->pdev->dev);
>> - /* start sentinel checking in case of missing uevent */
>> - dp_add_event(dp, EV_DISCONNECT_PENDING_TIMEOUT, 0,
>> DP_TIMEOUT_5_SECOND);
>> + if (state == ST_DISPLAY_OFF) {
>> + dp->hpd_state = ST_DISCONNECTED;
>> + } else {
>> + /* start sentinel checking in case of missing uevent */
>> + dp_add_event(dp, EV_DISCONNECT_PENDING_TIMEOUT, 0,
>> DP_TIMEOUT_5_SECOND);
>> + dp->hpd_state = ST_DISCONNECT_PENDING;
>> + }
>> /* signal the disconnect event early to ensure proper
>> teardown */
>> dp_display_handle_plugged_change(&dp->dp_display, false);
>> @@ -695,10 +708,16 @@ static int dp_disconnect_pending_timeout(struct
>> dp_display_private *dp, u32 data
>> mutex_lock(&dp->event_mutex);
>> + /*
>> + * main link had been set up and video is ready
>> + * tear down main link, video stream and phy
>> + */
>> state = dp->hpd_state;
>> if (state == ST_DISCONNECT_PENDING) {
>> - dp->hpd_state = ST_DISCONNECTED;
>> DRM_DEBUG_DP("type=%d\n", dp->dp_display.connector_type);
>> + dp_ctrl_off(dp->ctrl);
>> + dp_display_host_phy_exit(dp);
>> + dp->hpd_state = ST_DISCONNECTED;
>> }
>> mutex_unlock(&dp->event_mutex);
>> @@ -1571,6 +1590,12 @@ int msm_dp_display_enable(struct msm_dp *dp,
>> struct drm_encoder *encoder)
>> mutex_lock(&dp_display->event_mutex);
>> + state = dp_display->hpd_state;
>> + if (state == ST_DISCONNECTED) {
>> + mutex_unlock(&dp_display->event_mutex);
>> + return rc;
>> + }
>> +
>> /* stop sentinel checking */
>> dp_del_event(dp_display, EV_CONNECT_PENDING_TIMEOUT);
>> @@ -1588,8 +1613,6 @@ int msm_dp_display_enable(struct msm_dp *dp,
>> struct drm_encoder *encoder)
>> return rc;
>> }
>> - state = dp_display->hpd_state;
>> -
>> if (state == ST_DISPLAY_OFF)
>> dp_display_host_phy_init(dp_display);
>> @@ -1638,13 +1661,18 @@ int msm_dp_display_disable(struct msm_dp
>> *dp, struct drm_encoder *encoder)
>> /* stop sentinel checking */
>> dp_del_event(dp_display, EV_DISCONNECT_PENDING_TIMEOUT);
>> + state = dp_display->hpd_state;
>> + if (state == ST_DISCONNECTED || state == ST_DISPLAY_OFF) {
>> + mutex_unlock(&dp_display->event_mutex);
>> + return rc;
>> + }
>> +
>> dp_display_disable(dp_display, 0);
>> rc = dp_display_unprepare(dp);
>> if (rc)
>> DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
>> - state = dp_display->hpd_state;
>> if (state == ST_DISCONNECT_PENDING) {
>> /* completed disconnection */
>> dp_display->hpd_state = ST_DISCONNECTED;
>
>
Powered by blists - more mailing lists