linux-kernel - [tip: x86/irq] x86/PCI: Add support for the SiS85C497 PIRQ router

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <164958807049.4207.2725071892682453211.tip-bot2@tip-bot2>
Date:   Sun, 10 Apr 2022 10:54:30 -0000
From:   "tip-bot2 for Maciej W. Rozycki" <tip-bot2@...utronix.de>
To:     linux-tip-commits@...r.kernel.org
Cc:     "Maciej W. Rozycki" <macro@...am.me.uk>,
        Thomas Gleixner <tglx@...utronix.de>,
        Nikolai Zhubr <zhubr.2@...il.com>, x86@...nel.org,
        linux-kernel@...r.kernel.org
Subject: [tip: x86/irq] x86/PCI: Add support for the SiS85C497 PIRQ router

The following commit has been merged into the x86/irq branch of tip:

Commit-ID:     fe62bc23620fa027162e05594a610ff5e556496a
Gitweb:        https://git.kernel.org/tip/fe62bc23620fa027162e05594a610ff5e556496a
Author:        Maciej W. Rozycki <macro@...am.me.uk>
AuthorDate:    Thu, 31 Mar 2022 08:10:46 +01:00
Committer:     Thomas Gleixner <tglx@...utronix.de>
CommitterDate: Sun, 10 Apr 2022 12:48:14 +02:00

x86/PCI: Add support for the SiS85C497 PIRQ router

The SiS 85C496/497 486 Green PC VESA/ISA/PCI Chipset has support for PCI 
steering and the ELCR register implemented.  These features are handled 
by the SiS85C497 AT Bus Controller & Megacell (ATM) ISA bridge, however 
the device is wired as a peer bridge directly to the host bus and has 
its PCI configuration registers decoded at addresses 0x80-0xff by the 
accompanying SiS85C496 PCI & CPU Memory Controller (PCM) host bridge[1].  
Therefore we need to match on the host bridge's vendor and device ID.

Like with the SiS85C503 PIRQ router handle link value ranges of 1-4 and 
0xc0-0xc3, corresponding respectively to PIRQ line numbers counted from 
1 and link register PCI configuration space addresses.

References:

[1]  "486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0,
     Silicon Integrated Systems Corp., July 1995, Part IV, Section 3. 
     "PCI Configuration Space Registers (00h ~ FFh)", p. 114

Signed-off-by: Maciej W. Rozycki <macro@...am.me.uk>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Tested-by: Nikolai Zhubr <zhubr.2@...il.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610490.22465@angie.orcam.me.uk

---
 arch/x86/pci/irq.c | 80 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 80 insertions(+)

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index e5bc9f7..4b0e008 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -580,6 +580,81 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 	return 1;
 }
 
+
+/*
+ *	PIRQ routing for the SiS85C497 AT Bus Controller & Megacell (ATM)
+ *	ISA bridge used with the SiS 85C496/497 486 Green PC VESA/ISA/PCI
+ *	Chipset.
+ *
+ *	There are four PCI INTx#-to-IRQ Link registers provided in the
+ *	SiS85C497 part of the peculiar combined 85C496/497 configuration
+ *	space decoded by the SiS85C496 PCI & CPU Memory Controller (PCM)
+ *	host bridge, at 0xc0/0xc1/0xc2/0xc3 respectively for the PCI INT
+ *	A/B/C/D lines.  Bit 7 enables the respective link if set and bits
+ *	3:0 select the 8259A IRQ line as follows:
+ *
+ *	0000 : Reserved
+ *	0001 : Reserved
+ *	0010 : Reserved
+ *	0011 : IRQ3
+ *	0100 : IRQ4
+ *	0101 : IRQ5
+ *	0110 : IRQ6
+ *	0111 : IRQ7
+ *	1000 : Reserved
+ *	1001 : IRQ9
+ *	1010 : IRQ10
+ *	1011 : IRQ11
+ *	1100 : IRQ12
+ *	1101 : Reserved
+ *	1110 : IRQ14
+ *	1111 : IRQ15
+ *
+ *	We avoid using a reserved value for disabled links, hence the
+ *	choice of IRQ15 for that case.
+ *
+ *	References:
+ *
+ *	"486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0,
+ *	Silicon Integrated Systems Corp., July 1995
+ */
+
+#define PCI_SIS497_INTA_TO_IRQ_LINK	0xc0u
+
+#define PIRQ_SIS497_IRQ_MASK		0x0fu
+#define PIRQ_SIS497_IRQ_ENABLE		0x80u
+
+static int pirq_sis497_get(struct pci_dev *router, struct pci_dev *dev,
+			   int pirq)
+{
+	int reg;
+	u8 x;
+
+	reg = pirq;
+	if (reg >= 1 && reg <= 4)
+		reg += PCI_SIS497_INTA_TO_IRQ_LINK - 1;
+
+	pci_read_config_byte(router, reg, &x);
+	return (x & PIRQ_SIS497_IRQ_ENABLE) ? (x & PIRQ_SIS497_IRQ_MASK) : 0;
+}
+
+static int pirq_sis497_set(struct pci_dev *router, struct pci_dev *dev,
+			   int pirq, int irq)
+{
+	int reg;
+	u8 x;
+
+	reg = pirq;
+	if (reg >= 1 && reg <= 4)
+		reg += PCI_SIS497_INTA_TO_IRQ_LINK - 1;
+
+	pci_read_config_byte(router, reg, &x);
+	x &= ~(PIRQ_SIS497_IRQ_MASK | PIRQ_SIS497_IRQ_ENABLE);
+	x |= irq ? (PIRQ_SIS497_IRQ_ENABLE | irq) : PIRQ_SIS497_IRQ_MASK;
+	pci_write_config_byte(router, reg, x);
+	return 1;
+}
+
 /*
  *	PIRQ routing for SiS 85C503 router used in several SiS chipsets.
  *	We have to deal with the following issues here:
@@ -962,6 +1037,11 @@ static __init int serverworks_router_probe(struct irq_router *r,
 static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
 	switch (device) {
+	case PCI_DEVICE_ID_SI_496:
+		r->name = "SiS85C497";
+		r->get = pirq_sis497_get;
+		r->set = pirq_sis497_set;
+		return 1;
 	case PCI_DEVICE_ID_SI_503:
 		r->name = "SiS85C503";
 		r->get = pirq_sis503_get;