| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Apr 2022 22:07:01 +0530
From: Vinod Polimera <quic_vpolimer@...cinc.com>
To: dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc: Vinod Polimera <quic_vpolimer@...cinc.com>,
linux-kernel@...r.kernel.org, robdclark@...il.com,
dmitry.baryshkov@...aro.org, dianders@...omium.org,
quic_kalyant@...cinc.com
Subject: [PATCH v8 2/2] drm/msm/disp/dpu1: add inline rotation support for sc7280
- Some DPU versions support inline rot90. It is supported only for
limited amount of UBWC formats.
- There are two versions of inline rotators, v1 (present on sm8250 and
sm7250) and v2 (sc7280). These versions differ in the list of supported
formats and in the scaler possibilities.
Co-developed-by: Kalyan Thota <quic_kalyant@...cinc.com>
Signed-off-by: Kalyan Thota <quic_kalyant@...cinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@...cinc.com>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 43 ++++++++-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 16 +++
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 129 ++++++++++++++++++++-----
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 2 +
4 files changed, 161 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index a4fe77c..85b539d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -35,6 +35,9 @@
BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT))
+#define VIG_SC7280_MASK \
+ (VIG_SC7180_MASK | BIT(DPU_SSPP_INLINE_ROTATION))
+
#define DMA_SDM845_MASK \
(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
@@ -203,6 +206,11 @@ static const uint32_t plane_formats_yuv[] = {
DRM_FORMAT_YVU420,
};
+static const u32 rotation_v2_formats[] = {
+ DRM_FORMAT_NV12,
+ /* TODO add formats after validation */
+};
+
/*************************************************************
* DPU sub blocks config
*************************************************************/
@@ -642,7 +650,6 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = {
*************************************************************/
/* SSPP common configuration */
-
#define _VIG_SBLK(num, sdma_pri, qseed_ver) \
{ \
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
@@ -660,6 +667,27 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = {
.num_formats = ARRAY_SIZE(plane_formats_yuv), \
.virt_format_list = plane_formats, \
.virt_num_formats = ARRAY_SIZE(plane_formats), \
+ .rotation_cfg = NULL, \
+ }
+
+#define _VIG_SBLK_ROT(num, sdma_pri, qseed_ver, rot_cfg) \
+ { \
+ .maxdwnscale = MAX_DOWNSCALE_RATIO, \
+ .maxupscale = MAX_UPSCALE_RATIO, \
+ .smart_dma_priority = sdma_pri, \
+ .src_blk = {.name = STRCAT("sspp_src_", num), \
+ .id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \
+ .scaler_blk = {.name = STRCAT("sspp_scaler", num), \
+ .id = qseed_ver, \
+ .base = 0xa00, .len = 0xa0,}, \
+ .csc_blk = {.name = STRCAT("sspp_csc", num), \
+ .id = DPU_SSPP_CSC_10BIT, \
+ .base = 0x1a00, .len = 0x100,}, \
+ .format_list = plane_formats_yuv, \
+ .num_formats = ARRAY_SIZE(plane_formats_yuv), \
+ .virt_format_list = plane_formats, \
+ .virt_num_formats = ARRAY_SIZE(plane_formats), \
+ .rotation_cfg = rot_cfg, \
}
#define _DMA_SBLK(num, sdma_pri) \
@@ -684,6 +712,12 @@ static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);
+static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
+ .rot_maxheight = 1088,
+ .rot_num_formats = ARRAY_SIZE(rotation_v2_formats),
+ .rot_format_list = rotation_v2_formats,
+};
+
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3);
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
@@ -751,6 +785,9 @@ static const struct dpu_sspp_cfg sdm845_sspp[] = {
static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 =
_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4);
+static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 =
+ _VIG_SBLK_ROT("0", 4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2);
+
static const struct dpu_sspp_cfg sc7180_sspp[] = {
SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
@@ -791,8 +828,8 @@ static const struct dpu_sspp_cfg sm8250_sspp[] = {
};
static const struct dpu_sspp_cfg sc7280_sspp[] = {
- SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
- sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK,
+ sc7280_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_CURSOR_SDM845_MASK,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index b85b24b..35dd5c4 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -112,6 +112,7 @@ enum {
* @DPU_SSPP_TS_PREFILL Supports prefill with traffic shaper
* @DPU_SSPP_TS_PREFILL_REC1 Supports prefill with traffic shaper multirec
* @DPU_SSPP_CDP Supports client driven prefetch
+ * @DPU_SSPP_INLINE_ROTATION Support inline rotation
* @DPU_SSPP_MAX maximum value
*/
enum {
@@ -132,6 +133,7 @@ enum {
DPU_SSPP_TS_PREFILL,
DPU_SSPP_TS_PREFILL_REC1,
DPU_SSPP_CDP,
+ DPU_SSPP_INLINE_ROTATION,
DPU_SSPP_MAX
};
@@ -315,6 +317,18 @@ struct dpu_qos_lut_tbl {
};
/**
+ * struct dpu_rotation_cfg - define inline rotation config
+ * @rot_maxheight: max pre rotated height allowed for rotation
+ * @rot_num_formats: number of elements in @rot_format_list
+ * @rot_format_list: list of supported rotator formats
+ */
+struct dpu_rotation_cfg {
+ u32 rot_maxheight;
+ size_t rot_num_formats;
+ const u32 *rot_format_list;
+};
+
+/**
* struct dpu_caps - define DPU capabilities
* @max_mixer_width max layer mixer line width support.
* @max_mixer_blendstages max layer mixer blend stages or
@@ -369,6 +383,7 @@ struct dpu_caps {
* @num_formats: Number of supported formats
* @virt_format_list: Pointer to list of supported formats for virtual planes
* @virt_num_formats: Number of supported formats for virtual planes
+ * @dpu_rotation_cfg: inline rotation configuration
*/
struct dpu_sspp_sub_blks {
u32 creq_vblank;
@@ -390,6 +405,7 @@ struct dpu_sspp_sub_blks {
u32 num_formats;
const u32 *virt_format_list;
u32 virt_num_formats;
+ const struct dpu_rotation_cfg *rotation_cfg;
};
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 3216cda..c77c3d9d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -528,11 +528,19 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
struct dpu_plane_state *pstate,
uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
struct dpu_hw_scaler3_cfg *scale_cfg,
- struct dpu_hw_pixel_ext *pixel_ext,
const struct dpu_format *fmt,
uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
{
uint32_t i;
+ bool inline_rotation = pstate->rotation & DRM_MODE_ROTATE_90;
+
+ /*
+ * For inline rotation cases, scaler config is post-rotation,
+ * so swap the dimensions here. However, pixel extension will
+ * need pre-rotation settings.
+ */
+ if (inline_rotation)
+ swap(src_w, src_h);
scale_cfg->phase_step_x[DPU_SSPP_COMP_0] =
mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w);
@@ -571,11 +579,6 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H;
scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
}
-
- pixel_ext->num_ext_pxls_top[i] =
- scale_cfg->src_height[i];
- pixel_ext->num_ext_pxls_left[i] =
- scale_cfg->src_width[i];
}
if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h)
&& (src_w == dst_w))
@@ -591,6 +594,24 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
scale_cfg->enable = 1;
}
+static void _dpu_plane_setup_pixel_ext(struct dpu_hw_scaler3_cfg *scale_cfg,
+ struct dpu_hw_pixel_ext *pixel_ext,
+ uint32_t src_w, uint32_t src_h,
+ uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
+{
+ int i;
+
+ for (i = 0; i < DPU_MAX_PLANES; i++) {
+ if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) {
+ src_w /= chroma_subsmpl_h;
+ src_h /= chroma_subsmpl_v;
+ }
+
+ pixel_ext->num_ext_pxls_top[i] = src_h;
+ pixel_ext->num_ext_pxls_left[i] = src_w;
+ }
+}
+
static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
{
/* S15.16 format */
@@ -654,6 +675,10 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format);
struct dpu_hw_scaler3_cfg scaler3_cfg;
struct dpu_hw_pixel_ext pixel_ext;
+ u32 src_width = drm_rect_width(&pipe_cfg->src_rect);
+ u32 src_height = drm_rect_height(&pipe_cfg->src_rect);
+ u32 dst_width = drm_rect_width(&pipe_cfg->dst_rect);
+ u32 dst_height = drm_rect_height(&pipe_cfg->dst_rect);
memset(&scaler3_cfg, 0, sizeof(scaler3_cfg));
memset(&pixel_ext, 0, sizeof(pixel_ext));
@@ -661,13 +686,17 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
/* don't chroma subsample if decimating */
/* update scaler. calculate default config for QSEED3 */
_dpu_plane_setup_scaler3(pdpu, pstate,
- drm_rect_width(&pipe_cfg->src_rect),
- drm_rect_height(&pipe_cfg->src_rect),
- drm_rect_width(&pipe_cfg->dst_rect),
- drm_rect_height(&pipe_cfg->dst_rect),
- &scaler3_cfg, &pixel_ext, fmt,
+ src_width,
+ src_height,
+ dst_width,
+ dst_height,
+ &scaler3_cfg, fmt,
info->hsub, info->vsub);
+ /* configure pixel extension based on scalar config */
+ _dpu_plane_setup_pixel_ext(&scaler3_cfg, &pixel_ext,
+ src_width, src_height, info->hsub, info->vsub);
+
if (pdpu->pipe_hw->ops.setup_pe)
pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw,
&pixel_ext);
@@ -956,6 +985,34 @@ static bool dpu_plane_validate_src(struct drm_rect *src,
drm_rect_equals(fb_rect, src);
}
+static int dpu_plane_check_inline_rotation(struct dpu_plane *pdpu,
+ const struct dpu_sspp_sub_blks *sblk,
+ struct drm_rect src, const struct dpu_format *fmt)
+{
+ size_t num_formats;
+ const u32 *supported_formats;
+
+ if (!sblk->rotation_cfg) {
+ DPU_ERROR("invalid rotation cfg\n");
+ return -EINVAL;
+ }
+
+ if (drm_rect_width(&src) > sblk->rotation_cfg->rot_maxheight) {
+ DPU_DEBUG_PLANE(pdpu, "invalid height for inline rot:%d max:%d\n",
+ src.y2, sblk->rotation_cfg->rot_maxheight);
+ return -EINVAL;
+ }
+
+ supported_formats = sblk->rotation_cfg->rot_format_list;
+ num_formats = sblk->rotation_cfg->rot_num_formats;
+
+ if (!DPU_FORMAT_IS_UBWC(fmt) ||
+ !dpu_find_format(fmt->base.pixel_format, supported_formats, num_formats))
+ return -EINVAL;
+
+ return 0;
+}
+
static int dpu_plane_atomic_check(struct drm_plane *plane,
struct drm_atomic_state *state)
{
@@ -968,15 +1025,19 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
const struct dpu_format *fmt;
struct drm_rect src, dst, fb_rect = { 0 };
uint32_t min_src_size, max_linewidth;
+ unsigned int rotation;
+ uint32_t supported_rotations;
+ const struct dpu_sspp_cfg *pipe_hw_caps = pdpu->pipe_hw->cap;
+ const struct dpu_sspp_sub_blks *sblk = pdpu->pipe_hw->cap->sblk;
if (new_plane_state->crtc)
crtc_state = drm_atomic_get_new_crtc_state(state,
new_plane_state->crtc);
- min_scale = FRAC_16_16(1, pdpu->pipe_hw->cap->sblk->maxupscale);
+ min_scale = FRAC_16_16(1, sblk->maxupscale);
ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
min_scale,
- pdpu->pipe_hw->cap->sblk->maxdwnscale << 16,
+ sblk->maxdwnscale << 16,
true, true);
if (ret) {
DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
@@ -1002,8 +1063,8 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
if (DPU_FORMAT_IS_YUV(fmt) &&
- (!(pdpu->pipe_hw->cap->features & DPU_SSPP_SCALER) ||
- !(pdpu->pipe_hw->cap->features & DPU_SSPP_CSC_ANY))) {
+ (!(pipe_hw_caps->features & DPU_SSPP_SCALER) ||
+ !(pipe_hw_caps->features & DPU_SSPP_CSC_ANY))) {
DPU_DEBUG_PLANE(pdpu,
"plane doesn't have scaler/csc for yuv\n");
return -EINVAL;
@@ -1036,6 +1097,22 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
return -E2BIG;
}
+ supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
+
+ if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
+ supported_rotations |= DRM_MODE_ROTATE_90;
+
+ rotation = drm_rotation_simplify(new_plane_state->rotation,
+ supported_rotations);
+
+ if ((pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) &&
+ (rotation & DRM_MODE_ROTATE_90)) {
+ ret = dpu_plane_check_inline_rotation(pdpu, sblk, src, fmt);
+ if (ret)
+ return ret;
+ }
+
+ pstate->rotation = rotation;
pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
return 0;
@@ -1151,21 +1228,19 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
pstate->multirect_mode);
if (pdpu->pipe_hw->ops.setup_format) {
- unsigned int rotation;
+ unsigned int rotation = pstate->rotation;
src_flags = 0x0;
- rotation = drm_rotation_simplify(state->rotation,
- DRM_MODE_ROTATE_0 |
- DRM_MODE_REFLECT_X |
- DRM_MODE_REFLECT_Y);
-
if (rotation & DRM_MODE_REFLECT_X)
src_flags |= DPU_SSPP_FLIP_LR;
if (rotation & DRM_MODE_REFLECT_Y)
src_flags |= DPU_SSPP_FLIP_UD;
+ if (rotation & DRM_MODE_ROTATE_90)
+ src_flags |= DPU_SSPP_ROT_90;
+
/* update format */
pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags,
pstate->multirect_index);
@@ -1458,6 +1533,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
struct dpu_kms *kms = to_dpu_kms(priv->kms);
int zpos_max = DPU_ZPOS_MAX;
uint32_t num_formats;
+ uint32_t supported_rotations;
int ret = -EINVAL;
/* create and zero local structure */
@@ -1526,12 +1602,13 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
BIT(DRM_MODE_BLEND_PREMULTI) |
BIT(DRM_MODE_BLEND_COVERAGE));
+ supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
+
+ if (pdpu->pipe_hw->cap->features & BIT(DPU_SSPP_INLINE_ROTATION))
+ supported_rotations |= DRM_MODE_ROTATE_MASK;
+
drm_plane_create_rotation_property(plane,
- DRM_MODE_ROTATE_0,
- DRM_MODE_ROTATE_0 |
- DRM_MODE_ROTATE_180 |
- DRM_MODE_REFLECT_X |
- DRM_MODE_REFLECT_Y);
+ DRM_MODE_ROTATE_0, supported_rotations);
drm_plane_enable_fb_damage_clips(plane);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 50781e2..e146310 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -26,6 +26,7 @@
* @plane_fetch_bw: calculated BW per plane
* @plane_clk: calculated clk per plane
* @needs_dirtyfb: whether attached CRTC needs pixel data explicitly flushed
+ * @rotation: simplified drm rotation hint
*/
struct dpu_plane_state {
struct drm_plane_state base;
@@ -40,6 +41,7 @@ struct dpu_plane_state {
u64 plane_clk;
bool needs_dirtyfb;
+ unsigned int rotation;
};
/**
--
2.7.4
Powered by blists - more mailing lists