[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5d5d4590-18fc-1d94-08e3-7ffde8d9146d@baylibre.com>
Date: Mon, 11 Apr 2022 09:27:46 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: Lucas Tanure <tanure@...ux.com>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: linux-i2c@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register
definitions
On 09/04/2022 18:43, Lucas Tanure wrote:
> Differentiate between masks and shifts
>
> Signed-off-by: Lucas Tanure <tanure@...ux.com>
> ---
> drivers/i2c/busses/i2c-meson.c | 41 ++++++++++++++++++----------------
> 1 file changed, 22 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
> index 07eb819072c4..4b4a5b2d77ab 100644
> --- a/drivers/i2c/busses/i2c-meson.c
> +++ b/drivers/i2c/busses/i2c-meson.c
> @@ -30,18 +30,21 @@
> #define REG_TOK_RDATA1 0x1c
>
> /* Control register fields */
> -#define REG_CTRL_START BIT(0)
> -#define REG_CTRL_ACK_IGNORE BIT(1)
> -#define REG_CTRL_STATUS BIT(2)
> -#define REG_CTRL_ERROR BIT(3)
> -#define REG_CTRL_CLKDIV GENMASK(21, 12)
> -#define REG_CTRL_CLKDIVEXT GENMASK(29, 28)
> -
> -#define REG_SLV_ADDR GENMASK(7, 0)
> -#define REG_SLV_SDA_FILTER GENMASK(10, 8)
> -#define REG_SLV_SCL_FILTER GENMASK(13, 11)
> -#define REG_SLV_SCL_LOW GENMASK(27, 16)
> -#define REG_SLV_SCL_LOW_EN BIT(28)
> +#define REG_CTRL_START BIT(0)
> +#define REG_CTRL_ACK_IGNORE BIT(1)
> +#define REG_CTRL_STATUS BIT(2)
> +#define REG_CTRL_ERROR BIT(3)
> +#define REG_CTRL_CLKDIV_SHIFT 12
> +#define REG_CTRL_CLKDIV_MASK GENMASK(21, REG_CTRL_CLKDIV_SHIFT)
> +#define REG_CTRL_CLKDIVEXT_SHIFT 28
> +#define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, REG_CTRL_CLKDIVEXT_SHIFT)
> +
> +#define REG_SLV_ADDR_MASK GENMASK(7, 0)
> +#define REG_SLV_SDA_FILTER_MASK GENMASK(10, 8)
> +#define REG_SLV_SCL_FILTER_MASK GENMASK(13, 11)
> +#define REG_SLV_SCL_LOW_SHIFT 16
> +#define REG_SLV_SCL_LOW_MASK GENMASK(27, REG_SLV_SCL_LOW_SHIFT)
> +#define REG_SLV_SCL_LOW_EN BIT(28)
>
> #define I2C_TIMEOUT_MS 500
> #define FILTER_DELAY 15
> @@ -149,11 +152,11 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
> div = GENMASK(11, 0);
> }
>
> - meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV,
> - FIELD_PREP(REG_CTRL_CLKDIV, div & GENMASK(9, 0)));
> + meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
> + FIELD_PREP(REG_CTRL_CLKDIV_MASK, div & GENMASK(9, 0)));
>
> - meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT,
> - FIELD_PREP(REG_CTRL_CLKDIVEXT, div >> 10));
> + meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
> + FIELD_PREP(REG_CTRL_CLKDIVEXT_MASK, div >> 10));
>
> /* Disable HIGH/LOW mode */
> meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_SCL_LOW_EN, 0);
> @@ -292,8 +295,8 @@ static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
> TOKEN_SLAVE_ADDR_WRITE;
>
>
> - meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR,
> - FIELD_PREP(REG_SLV_ADDR, msg->addr << 1));
> + meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR_MASK,
> + FIELD_PREP(REG_SLV_ADDR_MASK, msg->addr << 1));
>
> meson_i2c_add_token(i2c, TOKEN_START);
> meson_i2c_add_token(i2c, token);
> @@ -467,7 +470,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
>
> /* Disable filtering */
> meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
> - REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
> + REG_SLV_SDA_FILTER_MASK | REG_SLV_SCL_FILTER_MASK, 0);
>
> meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
>
Reviewed-by: Neil Armstrong <narmstrong@...libre.com>
Powered by blists - more mailing lists