[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <s5h7d7wc75u.wl-tiwai@suse.de>
Date: Mon, 11 Apr 2022 11:15:41 +0200
From: Takashi Iwai <tiwai@...e.de>
To: Zheyu Ma <zheyuma97@...il.com>
Cc: perex@...ex.cz, tiwai@...e.com, alsa-devel@...a-project.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [BUG] ALSA: echoaudio: warning when the driver fails to probe
On Mon, 11 Apr 2022 11:06:09 +0200,
Takashi Iwai wrote:
>
> On Mon, 11 Apr 2022 10:49:53 +0200,
> Zheyu Ma wrote:
> >
> > On Mon, Apr 11, 2022 at 3:41 PM Takashi Iwai <tiwai@...e.de> wrote:
> > >
> > > On Sun, 10 Apr 2022 11:13:55 +0200,
> > > Zheyu Ma wrote:
> > > >
> > > > Hello,
> > > >
> > > > I found a bug in echoaudio.c.
> > > > When the driver fails at the function snd_echo_create(), it should
> > > > release resources requested before, otherwise we will get the
> > > > following warning:
> > > >
> > > > [ 3.262866] remove_proc_entry: removing non-empty directory
> > > > 'irq/21', leaking at least 'snd_indigodj'
> > > > [ 3.263577] WARNING: CPU: 3 PID: 261 at fs/proc/generic.c:717
> > > > remove_proc_entry+0x389/0x3f0
> > > > [ 3.267098] RIP: 0010:remove_proc_entry+0x389/0x3f0
> > > > [ 3.269976] Call Trace:
> > > > [ 3.269979] <TASK>
> > > > [ 3.269988] unregister_irq_proc+0x14c/0x170
> > > > [ 3.269997] irq_free_descs+0x94/0xe0
> > > > [ 3.270004] mp_unmap_irq+0xb6/0x100
> > > > [ 3.270011] acpi_unregister_gsi_ioapic+0x27/0x40
> > > > [ 3.270017] acpi_pci_irq_disable+0x1d3/0x320
> > > > [ 3.270025] pci_disable_device+0x1ad/0x380
> > > > [ 3.270034] pcim_release+0x566/0x6d0
> > > > [ 3.270046] devres_release_all+0x1f1/0x2c0
> > > > [ 3.270057] really_probe+0xe0/0x920
> > >
> > > Could you try the patch below?
> >
> > The following patch works for me, the previous warning disappears, thank you.
> > But I got another error, I have no idea about it.
>
> OK, that's bad, it's basically the destructor order problem.
> Could you try the patch below instead of the previous one?
Sorry, the below one instead.
Takashi
---
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -1889,13 +1889,20 @@ static void snd_echo_free(struct snd_card *card)
if (chip->comm_page)
rest_in_peace(chip);
- if (chip->irq >= 0)
- free_irq(chip->irq, chip);
-
/* release chip data */
free_firmware_cache(chip);
}
+static void do_free_irq(void *p)
+{
+ struct echoaudio *chip = p;
+
+ if (chip->irq >= 0) {
+ free_irq(chip->irq, chip);
+ chip->irq = -1;
+ }
+}
+
/* <--snd_echo_probe() */
static int snd_echo_create(struct snd_card *card,
struct pci_dev *pci)
@@ -1936,6 +1943,9 @@ static int snd_echo_create(struct snd_card *card,
return -ENOMEM;
}
+ err = devm_add_action(card->dev, do_free_irq, chip);
+ if (err < 0)
+ return err;
if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip)) {
dev_err(chip->card->dev, "cannot grab irq\n");
@@ -1946,8 +1956,6 @@ static int snd_echo_create(struct snd_card *card,
dev_dbg(card->dev, "pci=%p irq=%d subdev=%04x Init hardware...\n",
chip->pci, chip->irq, chip->pci->subsystem_device);
- card->private_free = snd_echo_free;
-
/* Create the DSP comm page - this is the area of memory used for most
of the communication with the DSP, which accesses it via bus mastering */
chip->commpage_dma_buf =
@@ -1957,6 +1965,7 @@ static int snd_echo_create(struct snd_card *card,
return -ENOMEM;
chip->comm_page_phys = chip->commpage_dma_buf->addr;
chip->comm_page = (struct comm_page *)chip->commpage_dma_buf->area;
+ card->private_free = snd_echo_free;
err = init_hw(chip, chip->pci->device, chip->pci->subsystem_device);
if (err >= 0)
Powered by blists - more mailing lists