[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220411100443.15132-5-shubhrajyoti.datta@xilinx.com>
Date: Mon, 11 Apr 2022 15:34:42 +0530
From: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
To: <linux-clk@...r.kernel.org>
CC: <robh+dt@...nel.org>, <gregkh@...uxfoundation.org>,
<sboyd@...nel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Subject: [PATCH v14 4/5] clk: clocking-wizard: Fix the reconfig for 5.2
The 5.2 the reconfig is triggered by writing 7 followed by
2 to the reconfig reg. Add the same. Also 6.0 is backward
compatible so it should be fine.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
---
drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
index 1e0818eb0435..61c40e06e381 100644
--- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
@@ -44,6 +44,8 @@
#define WZRD_DR_INIT_REG_OFFSET 0x25C
#define WZRD_DR_DIV_TO_PHASE_OFFSET 4
#define WZRD_DR_BEGIN_DYNA_RECONF 0x03
+#define WZRD_DR_BEGIN_DYNA_RECONF_5_2 0x07
+#define WZRD_DR_BEGIN_DYNA_RECONF1_5_2 0x02
#define WZRD_USEC_POLL 10
#define WZRD_TIMEOUT_POLL 1000
@@ -165,7 +167,9 @@ static int clk_wzrd_dynamic_reconfig(struct clk_hw *hw, unsigned long rate,
goto err_reconfig;
/* Initiate reconfiguration */
- writel(WZRD_DR_BEGIN_DYNA_RECONF,
+ writel(WZRD_DR_BEGIN_DYNA_RECONF_5_2,
+ divider->base + WZRD_DR_INIT_REG_OFFSET);
+ writel(WZRD_DR_BEGIN_DYNA_RECONF1_5_2,
divider->base + WZRD_DR_INIT_REG_OFFSET);
/* Check status register */
@@ -224,7 +228,7 @@ static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
void __iomem *div_addr = divider->base + divider->offset;
- rate_div = ((parent_rate * 1000) / rate);
+ rate_div = DIV_ROUND_DOWN_ULL(parent_rate * 1000, rate);
clockout0_div = rate_div / 1000;
pre = DIV_ROUND_CLOSEST((parent_rate * 1000), rate);
@@ -246,7 +250,9 @@ static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
return err;
/* Initiate reconfiguration */
- writel(WZRD_DR_BEGIN_DYNA_RECONF,
+ writel(WZRD_DR_BEGIN_DYNA_RECONF_5_2,
+ divider->base + WZRD_DR_INIT_REG_OFFSET);
+ writel(WZRD_DR_BEGIN_DYNA_RECONF1_5_2,
divider->base + WZRD_DR_INIT_REG_OFFSET);
/* Check status register */
--
2.17.1
Powered by blists - more mailing lists