linux-kernel - Re: [PATCH V2 13/15] cpufreq: mediatek: Link CCI device to CPU

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f4c5177fe99cc62b78083d3e8192d97065b2dad2.camel@mediatek.com>
Date:   Mon, 11 Apr 2022 19:51:18 +0800
From:   Rex-BC Chen <rex-bc.chen@...iatek.com>
To:     Kevin Hilman <khilman@...libre.com>, <rafael@...nel.org>,
        <viresh.kumar@...aro.org>, <robh+dt@...nel.org>,
        <krzk+dt@...nel.org>
CC:     <matthias.bgg@...il.com>, <jia-wei.chang@...iatek.com>,
        <roger.lu@...iatek.com>, <hsinyi@...gle.com>,
        <linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH V2 13/15] cpufreq: mediatek: Link CCI device to CPU

On Fri, 2022-04-08 at 13:54 -0700, Kevin Hilman wrote:
> Rex-BC Chen <rex-bc.chen@...iatek.com> writes:
> 
> > From: Jia-Wei Chang <jia-wei.chang@...iatek.com>
> > 
> > In some MediaTek SoCs, like MT8183, CPU and CCI share the same
> > power
> > supplies. Cpufreq needs to check if CCI devfreq exists and wait
> > until
> > CCI devfreq ready before scaling frequency.
> > 
> > - Add is_ccifreq_ready() to link CCI device to CPI, and CPU will
> > start
> >   DVFS when CCI is ready.
> > - Add platform data for MT8183.
> > 
> > Signed-off-by: Jia-Wei Chang <jia-wei.chang@...iatek.com>
> 
> The checks here are not enough, and will lead to unexpected behavior.
> IIUC, before doing DVFS, you're checking:
> 
> 1) if the "cci" DT node is present and
> 2) if the driver for that device is bound
> 
> If both those conditions are not met, you don't actually fail, you
> just
> silently do nothing in ->set_target().  As Angelo pointed out also,
> this
> is not a good idea, and will be rather confusing to users.
> 
> The same thing would happen if the cci DT node was present, but the
> CCI
> devfreq driver was disabled.  Silent failure would also be quite
> unexpected behavior.  Similarily, if the cci DT node is not present
> at
> all (like it is in current upstream DT), this CPUfreq driver will
> silently do nothing.  Not good.
> 
> So, this patch needs to handle several scenarios:
> 
> 1) CCI DT node not present
> 
> In this case, the driver should still operate normally.  With no CCI
> node, or driver there's no conflict.
> 
> 2) CCI DT present/enabled but not yet bound
> 
> In this case, you could return -EAGAIN as suggested by Angelo, or
> maybe
> better, it should do a deferred probe.
> 
> 3) CCI DT present, but driver disabled
> 
> This case is similar to (1), this driver should continue to work.
> 
> Kevin

Hello Kevin,

Thanks for your review.
I will review these three situations and do some modification.

BRs,
Rex