[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220411152234.12678-4-max.oss.09@gmail.com>
Date: Mon, 11 Apr 2022 17:22:23 +0200
From: Max Krummenacher <max.oss.09@...il.com>
To: max.krummenacher@...adex.com
Cc: Arnd Bergmann <arnd@...db.de>, Fabio Estevam <festevam@...il.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
NXP Linux Team <linux-imx@....com>,
Olof Johansson <olof@...om.net>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
soc@...nel.org
Subject: [PATCH v2 03/14] ARM: dts: imx6dl-colibri: Drop dedicated v1.1 device tree
From: Max Krummenacher <max.krummenacher@...adex.com>
Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0
with the possibility to use SD cards in UHS mode if the carrier board
does not have 3.3V pull up resistor.
The dedicated device tree kept the feature switched of by setting
the no-1-8-v property and thus does not offer anything different
than what the regular device tree does.
Thus drop the dedicated device tree and merge the preparation to
allow enabling the feature should a carrier without pull ups
be used into the regular device tree.
Signed-off-by: Max Krummenacher <max.krummenacher@...adex.com>
---
(no changes since v1)
arch/arm/boot/dts/Makefile | 1 -
.../boot/dts/imx6dl-colibri-v1_1-eval-v3.dts | 31 -------------
.../boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi | 44 -------------------
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 29 +++++++++++-
4 files changed, 27 insertions(+), 78 deletions(-)
delete mode 100644 arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
delete mode 100644 arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 252353fb4e3b..ae3cac8e653b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -459,7 +459,6 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
imx6dl-colibri-eval-v3.dtb \
- imx6dl-colibri-v1_1-eval-v3.dtb \
imx6dl-cubox-i.dtb \
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
deleted file mode 100644
index 223275f028f1..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6dl-colibri-eval-v3.dts"
-#include "imx6qdl-colibri-v1_1-uhs.dtsi"
-
-/ {
- model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
- compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
- "toradex,colibri_imx6dl-v1_1",
- "toradex,colibri_imx6dl-eval-v3",
- "toradex,colibri_imx6dl",
- "fsl,imx6dl";
-};
-
-/* Colibri MMC */
-&usdhc1 {
- status = "okay";
- /*
- * Please make sure your carrier board does not pull-up any of
- * the MMC/SD signals to 3.3 volt before attempting to activate
- * UHS-I support.
- * To let signaling voltage be changed to 1.8V, please
- * delete no-1-8-v property (example below):
- * /delete-property/no-1-8-v;
- */
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
deleted file mode 100644
index 7672fbfc29be..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&iomuxc {
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
- >;
- };
-};
-
-/* Colibri MMC */
-&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
- vmmc-supply = <®_module_3v3>;
- vqmmc-supply = <&vgen3_reg>;
- wakeup-source;
- keep-power-in-suspend;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 4e2a309c93fa..16d38bc78b2a 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -370,11 +370,14 @@
/* Colibri MMC */
&usdhc1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
disable-wp;
- vqmmc-supply = <®_module_3v3>;
+ vmmc-supply = <®_module_3v3>;
+ vqmmc-supply = <&vgen3_reg>;
bus-width = <4>;
no-1-8-v;
status = "disabled";
@@ -692,6 +695,28 @@
>;
};
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
--
2.20.1
Powered by blists - more mailing lists