[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <db475c5f8ff801ca0e48d89f5257de491f173b0b.camel@mediatek.com>
Date: Tue, 12 Apr 2022 15:37:48 +0800
From: Rex-BC Chen <rex-bc.chen@...iatek.com>
To: <xinlei.lee@...iatek.com>, <chunkuang.hu@...nel.org>,
<p.zabel@...gutronix.de>, <airlied@...ux.ie>, <daniel@...ll.ch>,
<matthias.bgg@...il.com>
CC: <dri-devel@...ts.freedesktop.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <jitao.shi@...iatek.com>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH v4,1/4] drm/mediatek: Adjust the timing of mipi signal
from LP00 to LP11
On Mon, 2022-04-11 at 10:31 +0800, xinlei.lee@...iatek.com wrote:
> From: Jitao Shi <jitao.shi@...iatek.com>
>
> Old sequence:
> 1. Pull the MIPI signal high
> 2. Delay & Dsi_reset
> 3. Set the dsi timing register
> 4. dsi clk & lanes leave ulp mode and enter hs mode
>
> The sequence after patching is:
> 1. Set the dsi timing register
> 2. Pull the MIPI signal high
> 3. Delay & Dsi_reset
> 4. dsi clk & lanes leave ulp mode and enter hs mode
>
> Fixes: 2dd8075d2185 ("drm/mediatek: mtk_dsi: Use the drm_panel_bridge
> API")
>
> Signed-off-by: Jitao Shi <jitao.shi@...iatek.com>
> Signed-off-by: Xinlei Lee <xinlei.lee@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ccb0511b9cd5..262c027d8c2f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -649,14 +649,14 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> mtk_dsi_reset_engine(dsi);
> mtk_dsi_phy_timconfig(dsi);
>
> - mtk_dsi_rxtx_control(dsi);
> - usleep_range(30, 100);
> - mtk_dsi_reset_dphy(dsi);
> mtk_dsi_ps_control_vact(dsi);
> mtk_dsi_set_vm_cmd(dsi);
> mtk_dsi_config_vdo_timing(dsi);
> mtk_dsi_set_interrupt_enable(dsi);
>
> + mtk_dsi_rxtx_control(dsi);
> + usleep_range(30, 100);
> + mtk_dsi_reset_dphy(dsi);
> mtk_dsi_clk_ulp_mode_leave(dsi);
> mtk_dsi_lane0_ulp_mode_leave(dsi);
> mtk_dsi_clk_hs_mode(dsi, 0);
Reviewed-by: Rex-BC Chen <rex-bc.chen@...iatek.com>
Powered by blists - more mailing lists