[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1649740652-17515-3-git-send-email-quic_rohiagar@quicinc.com>
Date: Tue, 12 Apr 2022 10:47:32 +0530
From: Rohit Agarwal <quic_rohiagar@...cinc.com>
To: agross@...nel.org, bjorn.andersson@...aro.org, kishon@...com,
vkoul@...nel.org, robh+dt@...nel.org, krzk+dt@...nel.org
Cc: manivannan.sadhasivam@...aro.org, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Rohit Agarwal <quic_rohiagar@...cinc.com>
Subject: [PATCH 2/2] phy: qcom-qmp: Add support for SDX65 QMP PHY
Add support for USB3 QMP PHY found in SDX65 platform. SDX65 uses
version 5.0.0 of the QMP PHY IP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@...cinc.com>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 76 +++++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 8ea87c6..58506b8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -2535,6 +2535,50 @@ static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
};
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
+};
+
+static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
@@ -4217,6 +4261,35 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
.pwrdn_delay_max = 1005, /* us */
};
+static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sdx65_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
+ .rx_tbl = sdx65_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_sdx55_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8350_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
.type = PHY_TYPE_UFS,
.nlanes = 2,
@@ -6044,6 +6117,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,sdx55-qmp-usb3-uni-phy",
.data = &sdx55_usb3_uniphy_cfg,
}, {
+ .compatible = "qcom,sdx65-qmp-usb3-uni-phy",
+ .data = &sdx65_usb3_uniphy_cfg,
+ }, {
.compatible = "qcom,sm8350-qmp-usb3-phy",
.data = &sm8350_usb3phy_cfg,
}, {
--
2.7.4
Powered by blists - more mailing lists