| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220413033503.3962-2-vburru@marvell.com>
Date: Tue, 12 Apr 2022 20:34:57 -0700
From: Veerasenareddy Burru <vburru@...vell.com>
To: <vburru@...vell.com>, <davem@...emloft.net>, <kuba@...nel.org>,
<corbet@....net>, <netdev@...r.kernel.org>,
<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: Abhijit Ayarekar <aayarekar@...vell.com>,
Satananda Burla <sburla@...vell.com>
Subject: [net-next PATCH v5 1/7] octeon_ep: Add driver framework and device initialization
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC.
Add implementation to load module, initilaize, register network device,
cleanup and unload module.
Signed-off-by: Veerasenareddy Burru <vburru@...vell.com>
Signed-off-by: Abhijit Ayarekar <aayarekar@...vell.com>
Signed-off-by: Satananda Burla <sburla@...vell.com>
---
V4 -> V5:
- fix clang reported errors: remove unused functions.
- address review comments:
> remove unused data structures "octep_wk" and "octep_wq".
> don't use static inline in C files; just use "static".
- fix spelling mistakes.
V3 -> V4:
- fix build errors observed with "make W=1 C=1".
- add __iomem attribute for the variables used to access registers.
V2 -> V3:
- fix the Title overline & underline mismatch in octeon_ep.rst,
reported by kernel test robot:
"Reported-by: kernel test robot <lkp@...el.com>"
V1 -> V2:
- split the patch into smaller patches.
- fix build errors observed with clang and "make W=1 C=1".
.../device_drivers/ethernet/index.rst | 1 +
.../ethernet/marvell/octeon_ep.rst | 35 ++
MAINTAINERS | 7 +
drivers/net/ethernet/marvell/Kconfig | 1 +
drivers/net/ethernet/marvell/Makefile | 1 +
.../net/ethernet/marvell/octeon_ep/Kconfig | 20 +
.../net/ethernet/marvell/octeon_ep/Makefile | 9 +
.../marvell/octeon_ep/octep_cn9k_pf.c | 241 +++++++++
.../ethernet/marvell/octeon_ep/octep_config.h | 204 +++++++
.../marvell/octeon_ep/octep_ctrl_mbox.c | 64 +++
.../marvell/octeon_ep/octep_ctrl_mbox.h | 170 ++++++
.../marvell/octeon_ep/octep_ctrl_net.c | 42 ++
.../marvell/octeon_ep/octep_ctrl_net.h | 299 ++++++++++
.../ethernet/marvell/octeon_ep/octep_main.c | 511 ++++++++++++++++++
.../ethernet/marvell/octeon_ep/octep_main.h | 364 +++++++++++++
.../marvell/octeon_ep/octep_regs_cn9k_pf.h | 367 +++++++++++++
.../net/ethernet/marvell/octeon_ep/octep_rx.c | 42 ++
.../net/ethernet/marvell/octeon_ep/octep_rx.h | 199 +++++++
.../net/ethernet/marvell/octeon_ep/octep_tx.c | 43 ++
.../net/ethernet/marvell/octeon_ep/octep_tx.h | 284 ++++++++++
20 files changed, 2904 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/Kconfig
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/Makefile
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_config.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_main.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_main.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_rx.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_rx.h
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_tx.c
create mode 100644 drivers/net/ethernet/marvell/octeon_ep/octep_tx.h
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 6b5dc203da2b..21a97703421d 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -39,6 +39,7 @@ Contents:
intel/iavf
intel/ice
marvell/octeontx2
+ marvell/octeon_ep
mellanox/mlx5
microsoft/netvsc
neterion/s2io
diff --git a/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
new file mode 100644
index 000000000000..bc562c49011b
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst
@@ -0,0 +1,35 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+====================================================================
+Linux kernel networking driver for Marvell's Octeon PCI Endpoint NIC
+====================================================================
+
+Network driver for Marvell's Octeon PCI EndPoint NIC.
+Copyright (c) 2020 Marvell International Ltd.
+
+Contents
+========
+
+- `Overview`_
+- `Supported Devices`_
+- `Interface Control`_
+
+Overview
+========
+This driver implements networking functionality of Marvell's Octeon PCI
+EndPoint NIC.
+
+Supported Devices
+=================
+Currently, this driver support following devices:
+ * Network controller: Cavium, Inc. Device b200
+
+Interface Control
+=================
+Network Interface control like changing mtu, link speed, link down/up are
+done by writing command to mailbox command queue, a mailbox interface
+implemented through a reserved region in BAR4.
+This driver writes the commands into the mailbox and the firmware on the
+Octeon device processes them. The firmware also sends unsolicited notifications
+to driver for events suchs as link change, through notification queue
+implemented as part of mailbox interface.
diff --git a/MAINTAINERS b/MAINTAINERS
index fd768d43e048..9b0480f1b153 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11828,6 +11828,13 @@ S: Supported
F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
F: drivers/mmc/host/sdhci-xenon*
+MARVELL OCTEON ENDPOINT DRIVER
+M: Veerasenareddy Burru <vburru@...vell.com>
+M: Abhijit Ayarekar <aayarekar@...vell.com>
+L: netdev@...r.kernel.org
+S: Supported
+F: drivers/net/ethernet/marvell/octeon_ep
+
MATROX FRAMEBUFFER DRIVER
L: linux-fbdev@...r.kernel.org
S: Orphan
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index fe0989c0fc25..4cb55724001b 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -177,6 +177,7 @@ config SKY2_DEBUG
source "drivers/net/ethernet/marvell/octeontx2/Kconfig"
+source "drivers/net/ethernet/marvell/octeon_ep/Kconfig"
source "drivers/net/ethernet/marvell/prestera/Kconfig"
endif # NET_VENDOR_MARVELL
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
index 9f88fe822555..ceba4aa4f026 100644
--- a/drivers/net/ethernet/marvell/Makefile
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_MVPP2) += mvpp2/
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SKY2) += sky2.o
+obj-y += octeon_ep/
obj-y += octeontx2/
obj-y += prestera/
diff --git a/drivers/net/ethernet/marvell/octeon_ep/Kconfig b/drivers/net/ethernet/marvell/octeon_ep/Kconfig
new file mode 100644
index 000000000000..0d7db815340e
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Marvell's Octeon PCI Endpoint NIC Driver Configuration
+#
+
+config OCTEON_EP
+ tristate "Marvell Octeon PCI Endpoint NIC Driver"
+ depends on 64BIT
+ depends on PCI
+ depends on PTP_1588_CLOCK_OPTIONAL
+ help
+ This driver supports networking functionality of Marvell's
+ Octeon PCI Endpoint NIC.
+
+ To know the list of devices supported by this driver, refer
+ documentation in
+ <file:Documentation/networking/device_drivers/ethernet/marvell/octeon_ep.rst>.
+
+ To compile this drivers as a module, choose M here. Name of the
+ module is octeon_ep.
diff --git a/drivers/net/ethernet/marvell/octeon_ep/Makefile b/drivers/net/ethernet/marvell/octeon_ep/Makefile
new file mode 100644
index 000000000000..6e2db8e80b4a
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Network driver for Marvell's Octeon PCI Endpoint NIC
+#
+
+obj-$(CONFIG_OCTEON_EP) += octeon_ep.o
+
+octeon_ep-y := octep_main.o octep_cn9k_pf.o octep_tx.o octep_rx.o \
+ octep_ctrl_mbox.o octep_ctrl_net.o
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
new file mode 100644
index 000000000000..a38b52788619
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include "octep_config.h"
+#include "octep_main.h"
+#include "octep_regs_cn9k_pf.h"
+
+/* Names of Hardware non-queue generic interrupts */
+static char *cn93_non_ioq_msix_names[] = {
+ "epf_ire_rint",
+ "epf_ore_rint",
+ "epf_vfire_rint0",
+ "epf_vfire_rint1",
+ "epf_vfore_rint0",
+ "epf_vfore_rint1",
+ "epf_mbox_rint0",
+ "epf_mbox_rint1",
+ "epf_oei_rint",
+ "epf_dma_rint",
+ "epf_dma_vf_rint0",
+ "epf_dma_vf_rint1",
+ "epf_pp_vf_rint0",
+ "epf_pp_vf_rint1",
+ "epf_misc_rint",
+ "epf_rsvd",
+};
+
+/* Reset all hardware Tx/Rx queues */
+static void octep_reset_io_queues_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Initialize windowed addresses to access some hardware registers */
+static void octep_setup_pci_window_regs_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Configure Hardware mapping: inform hardware which rings belong to PF. */
+static void octep_configure_ring_mapping_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Initialize configuration limits and initial active config 93xx PF. */
+static void octep_init_config_cn93_pf(struct octep_device *oct)
+{
+ struct octep_config *conf = oct->conf;
+ struct pci_dev *pdev = oct->pdev;
+ u64 val;
+
+ /* Read ring configuration:
+ * PF ring count, number of VFs and rings per VF supported
+ */
+ val = octep_read_csr64(oct, CN93_SDP_EPF_RINFO);
+ conf->sriov_cfg.max_rings_per_vf = CN93_SDP_EPF_RINFO_RPVF(val);
+ conf->sriov_cfg.active_rings_per_vf = conf->sriov_cfg.max_rings_per_vf;
+ conf->sriov_cfg.max_vfs = CN93_SDP_EPF_RINFO_NVFS(val);
+ conf->sriov_cfg.active_vfs = conf->sriov_cfg.max_vfs;
+ conf->sriov_cfg.vf_srn = CN93_SDP_EPF_RINFO_SRN(val);
+
+ val = octep_read_csr64(oct, CN93_SDP_MAC_PF_RING_CTL(oct->pcie_port));
+ conf->pf_ring_cfg.srn = CN93_SDP_MAC_PF_RING_CTL_SRN(val);
+ conf->pf_ring_cfg.max_io_rings = CN93_SDP_MAC_PF_RING_CTL_RPPF(val);
+ conf->pf_ring_cfg.active_io_rings = conf->pf_ring_cfg.max_io_rings;
+ dev_info(&pdev->dev, "pf_srn=%u rpvf=%u nvfs=%u rppf=%u\n",
+ conf->pf_ring_cfg.srn, conf->sriov_cfg.active_rings_per_vf,
+ conf->sriov_cfg.active_vfs, conf->pf_ring_cfg.active_io_rings);
+
+ conf->iq.num_descs = OCTEP_IQ_MAX_DESCRIPTORS;
+ conf->iq.instr_type = OCTEP_64BYTE_INSTR;
+ conf->iq.pkind = 0;
+ conf->iq.db_min = OCTEP_DB_MIN;
+ conf->iq.intr_threshold = OCTEP_IQ_INTR_THRESHOLD;
+
+ conf->oq.num_descs = OCTEP_OQ_MAX_DESCRIPTORS;
+ conf->oq.buf_size = OCTEP_OQ_BUF_SIZE;
+ conf->oq.refill_threshold = OCTEP_OQ_REFILL_THRESHOLD;
+ conf->oq.oq_intr_pkt = OCTEP_OQ_INTR_PKT_THRESHOLD;
+ conf->oq.oq_intr_time = OCTEP_OQ_INTR_TIME_THRESHOLD;
+
+ conf->msix_cfg.non_ioq_msix = CN93_NUM_NON_IOQ_INTR;
+ conf->msix_cfg.ioq_msix = conf->pf_ring_cfg.active_io_rings;
+ conf->msix_cfg.non_ioq_msix_names = cn93_non_ioq_msix_names;
+
+ conf->ctrl_mbox_cfg.barmem_addr = (void __iomem *)oct->mmio[2].hw_addr + (0x400000ull * 7);
+}
+
+/* Setup registers for a hardware Tx Queue */
+static void octep_setup_iq_regs_cn93_pf(struct octep_device *oct, int iq_no)
+{
+}
+
+/* Setup registers for a hardware Rx Queue */
+static void octep_setup_oq_regs_cn93_pf(struct octep_device *oct, int oq_no)
+{
+}
+
+/* Setup registers for a PF mailbox */
+static void octep_setup_mbox_regs_cn93_pf(struct octep_device *oct, int q_no)
+{
+}
+
+/* Interrupts handler for all non-queue generic interrupts. */
+static irqreturn_t octep_non_ioq_intr_handler_cn93_pf(void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+/* Tx/Rx queue interrupt handler */
+static irqreturn_t octep_ioq_intr_handler_cn93_pf(void *data)
+{
+ return IRQ_HANDLED;
+}
+
+/* soft reset of 93xx */
+static int octep_soft_reset_cn93_pf(struct octep_device *oct)
+{
+ dev_info(&oct->pdev->dev, "CN93XX: Doing soft reset\n");
+
+ octep_write_csr64(oct, CN93_SDP_WIN_WR_MASK_REG, 0xFF);
+
+ /* Set core domain reset bit */
+ OCTEP_PCI_WIN_WRITE(oct, CN93_RST_CORE_DOMAIN_W1S, 1);
+ /* Wait for 100ms as Octeon resets. */
+ mdelay(100);
+ /* clear core domain reset bit */
+ OCTEP_PCI_WIN_WRITE(oct, CN93_RST_CORE_DOMAIN_W1C, 1);
+
+ return 0;
+}
+
+/* Re-initialize Octeon hardware registers */
+static void octep_reinit_regs_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Enable all interrupts */
+static void octep_enable_interrupts_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Disable all interrupts */
+static void octep_disable_interrupts_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Get new Octeon Read Index: index of descriptor that Octeon reads next. */
+static u32 octep_update_iq_read_index_cn93_pf(struct octep_iq *iq)
+{
+ return 0;
+}
+
+/* Enable a hardware Tx Queue */
+static void octep_enable_iq_cn93_pf(struct octep_device *oct, int iq_no)
+{
+}
+
+/* Enable a hardware Rx Queue */
+static void octep_enable_oq_cn93_pf(struct octep_device *oct, int oq_no)
+{
+}
+
+/* Enable all hardware Tx/Rx Queues assined to PF */
+static void octep_enable_io_queues_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Disable a hardware Tx Queue assined to PF */
+static void octep_disable_iq_cn93_pf(struct octep_device *oct, int iq_no)
+{
+}
+
+/* Disable a hardware Rx Queue assined to PF */
+static void octep_disable_oq_cn93_pf(struct octep_device *oct, int oq_no)
+{
+}
+
+/* Disable all hardware Tx/Rx Queues assined to PF */
+static void octep_disable_io_queues_cn93_pf(struct octep_device *oct)
+{
+}
+
+/* Dump hardware registers (including Tx/Rx queues) for debugging. */
+static void octep_dump_registers_cn93_pf(struct octep_device *oct)
+{
+}
+
+/**
+ * octep_device_setup_cn93_pf() - Setup Octeon device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * - initialize hardware operations.
+ * - get target side pcie port number for the device.
+ * - setup window access to hardware registers.
+ * - set initial configuration and max limits.
+ * - setup hardware mapping of rings to the PF device.
+ */
+void octep_device_setup_cn93_pf(struct octep_device *oct)
+{
+ oct->hw_ops.setup_iq_regs = octep_setup_iq_regs_cn93_pf;
+ oct->hw_ops.setup_oq_regs = octep_setup_oq_regs_cn93_pf;
+ oct->hw_ops.setup_mbox_regs = octep_setup_mbox_regs_cn93_pf;
+
+ oct->hw_ops.non_ioq_intr_handler = octep_non_ioq_intr_handler_cn93_pf;
+ oct->hw_ops.ioq_intr_handler = octep_ioq_intr_handler_cn93_pf;
+ oct->hw_ops.soft_reset = octep_soft_reset_cn93_pf;
+ oct->hw_ops.reinit_regs = octep_reinit_regs_cn93_pf;
+
+ oct->hw_ops.enable_interrupts = octep_enable_interrupts_cn93_pf;
+ oct->hw_ops.disable_interrupts = octep_disable_interrupts_cn93_pf;
+
+ oct->hw_ops.update_iq_read_idx = octep_update_iq_read_index_cn93_pf;
+
+ oct->hw_ops.enable_iq = octep_enable_iq_cn93_pf;
+ oct->hw_ops.enable_oq = octep_enable_oq_cn93_pf;
+ oct->hw_ops.enable_io_queues = octep_enable_io_queues_cn93_pf;
+
+ oct->hw_ops.disable_iq = octep_disable_iq_cn93_pf;
+ oct->hw_ops.disable_oq = octep_disable_oq_cn93_pf;
+ oct->hw_ops.disable_io_queues = octep_disable_io_queues_cn93_pf;
+ oct->hw_ops.reset_io_queues = octep_reset_io_queues_cn93_pf;
+
+ oct->hw_ops.dump_registers = octep_dump_registers_cn93_pf;
+
+ octep_setup_pci_window_regs_cn93_pf(oct);
+
+ oct->pcie_port = octep_read_csr64(oct, CN93_SDP_MAC_NUMBER) & 0xff;
+ dev_info(&oct->pdev->dev,
+ "Octeon device using PCIE Port %d\n", oct->pcie_port);
+
+ octep_init_config_cn93_pf(oct);
+ octep_configure_ring_mapping_cn93_pf(oct);
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_config.h b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
new file mode 100644
index 000000000000..f208f3f9a447
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_config.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_CONFIG_H_
+#define _OCTEP_CONFIG_H_
+
+/* Tx instruction types by length */
+#define OCTEP_32BYTE_INSTR 32
+#define OCTEP_64BYTE_INSTR 64
+
+/* Tx Queue: maximum descriptors per ring */
+#define OCTEP_IQ_MAX_DESCRIPTORS 1024
+/* Minimum input (Tx) requests to be enqueued to ring doorbell */
+#define OCTEP_DB_MIN 1
+/* Packet threshold for Tx queue interrupt */
+#define OCTEP_IQ_INTR_THRESHOLD 0x0
+
+/* Rx Queue: maximum descriptors per ring */
+#define OCTEP_OQ_MAX_DESCRIPTORS 1024
+
+/* Rx buffer size: Use page size buffers.
+ * Build skb from allocated page buffer once the packet is received.
+ * When a gathered packet is received, make head page as skb head and
+ * page buffers in consecutive Rx descriptors as fragments.
+ */
+#define OCTEP_OQ_BUF_SIZE (SKB_WITH_OVERHEAD(PAGE_SIZE))
+#define OCTEP_OQ_PKTS_PER_INTR 128
+#define OCTEP_OQ_REFILL_THRESHOLD (OCTEP_OQ_MAX_DESCRIPTORS / 4)
+
+#define OCTEP_OQ_INTR_PKT_THRESHOLD 1
+#define OCTEP_OQ_INTR_TIME_THRESHOLD 10
+
+#define OCTEP_MSIX_NAME_SIZE (IFNAMSIZ + 32)
+
+/* Tx Queue wake threshold
+ * wakeup a stopped Tx queue if minimum 2 descriptors are available.
+ * Even a skb with fragments consume only one Tx queue descriptor entry.
+ */
+#define OCTEP_WAKE_QUEUE_THRESHOLD 2
+
+/* Minimum MTU supported by Octeon network interface */
+#define OCTEP_MIN_MTU ETH_MIN_MTU
+/* Maximum MTU supported by Octeon interface*/
+#define OCTEP_MAX_MTU (10000 - (ETH_HLEN + ETH_FCS_LEN))
+/* Default MTU */
+#define OCTEP_DEFAULT_MTU 1500
+
+/* Macros to get octeon config params */
+#define CFG_GET_IQ_CFG(cfg) ((cfg)->iq)
+#define CFG_GET_IQ_NUM_DESC(cfg) ((cfg)->iq.num_descs)
+#define CFG_GET_IQ_INSTR_TYPE(cfg) ((cfg)->iq.instr_type)
+#define CFG_GET_IQ_PKIND(cfg) ((cfg)->iq.pkind)
+#define CFG_GET_IQ_INSTR_SIZE(cfg) (64)
+#define CFG_GET_IQ_DB_MIN(cfg) ((cfg)->iq.db_min)
+#define CFG_GET_IQ_INTR_THRESHOLD(cfg) ((cfg)->iq.intr_threshold)
+
+#define CFG_GET_OQ_NUM_DESC(cfg) ((cfg)->oq.num_descs)
+#define CFG_GET_OQ_BUF_SIZE(cfg) ((cfg)->oq.buf_size)
+#define CFG_GET_OQ_REFILL_THRESHOLD(cfg) ((cfg)->oq.refill_threshold)
+#define CFG_GET_OQ_INTR_PKT(cfg) ((cfg)->oq.oq_intr_pkt)
+#define CFG_GET_OQ_INTR_TIME(cfg) ((cfg)->oq.oq_intr_time)
+
+#define CFG_GET_PORTS_MAX_IO_RINGS(cfg) ((cfg)->pf_ring_cfg.max_io_rings)
+#define CFG_GET_PORTS_ACTIVE_IO_RINGS(cfg) ((cfg)->pf_ring_cfg.active_io_rings)
+#define CFG_GET_PORTS_PF_SRN(cfg) ((cfg)->pf_ring_cfg.srn)
+
+#define CFG_GET_DPI_PKIND(cfg) ((cfg)->core_cfg.dpi_pkind)
+#define CFG_GET_CORE_TICS_PER_US(cfg) ((cfg)->core_cfg.core_tics_per_us)
+#define CFG_GET_COPROC_TICS_PER_US(cfg) ((cfg)->core_cfg.coproc_tics_per_us)
+
+#define CFG_GET_MAX_VFS(cfg) ((cfg)->sriov_cfg.max_vfs)
+#define CFG_GET_ACTIVE_VFS(cfg) ((cfg)->sriov_cfg.active_vfs)
+#define CFG_GET_MAX_RPVF(cfg) ((cfg)->sriov_cfg.max_rings_per_vf)
+#define CFG_GET_ACTIVE_RPVF(cfg) ((cfg)->sriov_cfg.active_rings_per_vf)
+#define CFG_GET_VF_SRN(cfg) ((cfg)->sriov_cfg.vf_srn)
+
+#define CFG_GET_IOQ_MSIX(cfg) ((cfg)->msix_cfg.ioq_msix)
+#define CFG_GET_NON_IOQ_MSIX(cfg) ((cfg)->msix_cfg.non_ioq_msix)
+#define CFG_GET_NON_IOQ_MSIX_NAMES(cfg) ((cfg)->msix_cfg.non_ioq_msix_names)
+
+#define CFG_GET_CTRL_MBOX_MEM_ADDR(cfg) ((cfg)->ctrl_mbox_cfg.barmem_addr)
+
+/* Hardware Tx Queue configuration. */
+struct octep_iq_config {
+ /* Size of the Input queue (number of commands) */
+ u16 num_descs;
+
+ /* Command size - 32 or 64 bytes */
+ u16 instr_type;
+
+ /* pkind for packets sent to Octeon */
+ u16 pkind;
+
+ /* Minimum number of commands pending to be posted to Octeon before driver
+ * hits the Input queue doorbell.
+ */
+ u16 db_min;
+
+ /* Trigger the IQ interrupt when processed cmd count reaches
+ * this level.
+ */
+ u32 intr_threshold;
+};
+
+/* Hardware Rx Queue configuration. */
+struct octep_oq_config {
+ /* Size of Output queue (number of descriptors) */
+ u16 num_descs;
+
+ /* Size of buffer in this Output queue. */
+ u16 buf_size;
+
+ /* The number of buffers that were consumed during packet processing
+ * by the driver on this Output queue before the driver attempts to
+ * replenish the descriptor ring with new buffers.
+ */
+ u16 refill_threshold;
+
+ /* Interrupt Coalescing (Packet Count). Octeon will interrupt the host
+ * only if it sent as many packets as specified by this field.
+ * The driver usually does not use packet count interrupt coalescing.
+ */
+ u32 oq_intr_pkt;
+
+ /* Interrupt Coalescing (Time Interval). Octeon will interrupt the host
+ * if at least one packet was sent in the time interval specified by
+ * this field. The driver uses time interval interrupt coalescing by
+ * default. The time is specified in microseconds.
+ */
+ u32 oq_intr_time;
+};
+
+/* Tx/Rx configuration */
+struct octep_pf_ring_config {
+ /* Max number of IOQs */
+ u16 max_io_rings;
+
+ /* Number of active IOQs */
+ u16 active_io_rings;
+
+ /* Starting IOQ number: this changes based on which PEM is used */
+ u16 srn;
+};
+
+/* Octeon Hardware SRIOV config */
+struct octep_sriov_config {
+ /* Max number of VF devices supported */
+ u16 max_vfs;
+
+ /* Number of VF devices enabled */
+ u16 active_vfs;
+
+ /* Max number of rings assigned to VF */
+ u8 max_rings_per_vf;
+
+ /* Number of rings enabled per VF */
+ u8 active_rings_per_vf;
+
+ /* starting ring number of VF's: ring-0 of VF-0 of the PF */
+ u16 vf_srn;
+};
+
+/* Octeon MSI-x config. */
+struct octep_msix_config {
+ /* Number of IOQ interrupts */
+ u16 ioq_msix;
+
+ /* Number of Non IOQ interrupts */
+ u16 non_ioq_msix;
+
+ /* Names of Non IOQ interrupts */
+ char **non_ioq_msix_names;
+};
+
+struct octep_ctrl_mbox_config {
+ /* Barmem address for control mbox */
+ void __iomem *barmem_addr;
+};
+
+/* Data Structure to hold configuration limits and active config */
+struct octep_config {
+ /* Input Queue attributes. */
+ struct octep_iq_config iq;
+
+ /* Output Queue attributes. */
+ struct octep_oq_config oq;
+
+ /* NIC Port Configuration */
+ struct octep_pf_ring_config pf_ring_cfg;
+
+ /* SRIOV configuration of the PF */
+ struct octep_sriov_config sriov_cfg;
+
+ /* MSI-X interrupt config */
+ struct octep_msix_config msix_cfg;
+
+ /* ctrl mbox config */
+ struct octep_ctrl_mbox_config ctrl_mbox_cfg;
+};
+#endif /* _OCTEP_CONFIG_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.c b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.c
new file mode 100644
index 000000000000..5479f64d5bfc
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+
+#include "octep_ctrl_mbox.h"
+#include "octep_config.h"
+#include "octep_main.h"
+
+/* Timeout in msecs for message response */
+#define OCTEP_CTRL_MBOX_MSG_TIMEOUT_MS 100
+/* Time in msecs to wait for message response */
+#define OCTEP_CTRL_MBOX_MSG_WAIT_MS 10
+
+#define OCTEP_CTRL_MBOX_INFO_MAGIC_NUM_OFFSET(m) (m)
+#define OCTEP_CTRL_MBOX_INFO_BARMEM_SZ_OFFSET(m) ((m) + 8)
+#define OCTEP_CTRL_MBOX_INFO_HOST_VERSION_OFFSET(m) ((m) + 16)
+#define OCTEP_CTRL_MBOX_INFO_HOST_STATUS_OFFSET(m) ((m) + 24)
+#define OCTEP_CTRL_MBOX_INFO_FW_VERSION_OFFSET(m) ((m) + 136)
+#define OCTEP_CTRL_MBOX_INFO_FW_STATUS_OFFSET(m) ((m) + 144)
+
+#define OCTEP_CTRL_MBOX_H2FQ_INFO_OFFSET(m) ((m) + OCTEP_CTRL_MBOX_INFO_SZ)
+#define OCTEP_CTRL_MBOX_H2FQ_PROD_OFFSET(m) (OCTEP_CTRL_MBOX_H2FQ_INFO_OFFSET(m))
+#define OCTEP_CTRL_MBOX_H2FQ_CONS_OFFSET(m) ((OCTEP_CTRL_MBOX_H2FQ_INFO_OFFSET(m)) + 4)
+#define OCTEP_CTRL_MBOX_H2FQ_ELEM_SZ_OFFSET(m) ((OCTEP_CTRL_MBOX_H2FQ_INFO_OFFSET(m)) + 8)
+#define OCTEP_CTRL_MBOX_H2FQ_ELEM_CNT_OFFSET(m) ((OCTEP_CTRL_MBOX_H2FQ_INFO_OFFSET(m)) + 12)
+
+#define OCTEP_CTRL_MBOX_F2HQ_INFO_OFFSET(m) ((m) + \
+ OCTEP_CTRL_MBOX_INFO_SZ + \
+ OCTEP_CTRL_MBOX_H2FQ_INFO_SZ)
+#define OCTEP_CTRL_MBOX_F2HQ_PROD_OFFSET(m) (OCTEP_CTRL_MBOX_F2HQ_INFO_OFFSET(m))
+#define OCTEP_CTRL_MBOX_F2HQ_CONS_OFFSET(m) ((OCTEP_CTRL_MBOX_F2HQ_INFO_OFFSET(m)) + 4)
+#define OCTEP_CTRL_MBOX_F2HQ_ELEM_SZ_OFFSET(m) ((OCTEP_CTRL_MBOX_F2HQ_INFO_OFFSET(m)) + 8)
+#define OCTEP_CTRL_MBOX_F2HQ_ELEM_CNT_OFFSET(m) ((OCTEP_CTRL_MBOX_F2HQ_INFO_OFFSET(m)) + 12)
+
+#define OCTEP_CTRL_MBOX_Q_OFFSET(m, i) ((m) + \
+ (sizeof(struct octep_ctrl_mbox_msg) * (i)))
+
+int octep_ctrl_mbox_init(struct octep_ctrl_mbox *mbox)
+{
+ return -EINVAL;
+}
+
+int octep_ctrl_mbox_recv(struct octep_ctrl_mbox *mbox, struct octep_ctrl_mbox_msg *msg)
+{
+ return -EINVAL;
+}
+
+int octep_ctrl_mbox_uninit(struct octep_ctrl_mbox *mbox)
+{
+ return -EINVAL;
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.h b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.h
new file mode 100644
index 000000000000..d5ad58c6bbaa
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_mbox.h
@@ -0,0 +1,170 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+ #ifndef __OCTEP_CTRL_MBOX_H__
+#define __OCTEP_CTRL_MBOX_H__
+
+/* barmem structure
+ * |===========================================|
+ * |Info (16 + 120 + 120 = 256 bytes) |
+ * |-------------------------------------------|
+ * |magic number (8 bytes) |
+ * |bar memory size (4 bytes) |
+ * |reserved (4 bytes) |
+ * |-------------------------------------------|
+ * |host version (8 bytes) |
+ * |host status (8 bytes) |
+ * |host reserved (104 bytes) |
+ * |-------------------------------------------|
+ * |fw version (8 bytes) |
+ * |fw status (8 bytes) |
+ * |fw reserved (104 bytes) |
+ * |===========================================|
+ * |Host to Fw Queue info (16 bytes) |
+ * |-------------------------------------------|
+ * |producer index (4 bytes) |
+ * |consumer index (4 bytes) |
+ * |element size (4 bytes) |
+ * |element count (4 bytes) |
+ * |===========================================|
+ * |Fw to Host Queue info (16 bytes) |
+ * |-------------------------------------------|
+ * |producer index (4 bytes) |
+ * |consumer index (4 bytes) |
+ * |element size (4 bytes) |
+ * |element count (4 bytes) |
+ * |===========================================|
+ * |Host to Fw Queue |
+ * |-------------------------------------------|
+ * |((elem_sz + hdr(8 bytes)) * elem_cnt) bytes|
+ * |===========================================|
+ * |===========================================|
+ * |Fw to Host Queue |
+ * |-------------------------------------------|
+ * |((elem_sz + hdr(8 bytes)) * elem_cnt) bytes|
+ * |===========================================|
+ */
+
+#define OCTEP_CTRL_MBOX_MAGIC_NUMBER 0xdeaddeadbeefbeefull
+
+/* Size of mbox info in bytes */
+#define OCTEP_CTRL_MBOX_INFO_SZ 256
+/* Size of mbox host to target queue info in bytes */
+#define OCTEP_CTRL_MBOX_H2FQ_INFO_SZ 16
+/* Size of mbox target to host queue info in bytes */
+#define OCTEP_CTRL_MBOX_F2HQ_INFO_SZ 16
+/* Size of mbox queue in bytes */
+#define OCTEP_CTRL_MBOX_Q_SZ(sz, cnt) (((sz) + 8) * (cnt))
+/* Size of mbox in bytes */
+#define OCTEP_CTRL_MBOX_SZ(hsz, hcnt, fsz, fcnt) (OCTEP_CTRL_MBOX_INFO_SZ + \
+ OCTEP_CTRL_MBOX_H2FQ_INFO_SZ + \
+ OCTEP_CTRL_MBOX_F2HQ_INFO_SZ + \
+ OCTEP_CTRL_MBOX_Q_SZ(hsz, hcnt) + \
+ OCTEP_CTRL_MBOX_Q_SZ(fsz, fcnt))
+
+/* Valid request message */
+#define OCTEP_CTRL_MBOX_MSG_HDR_FLAG_REQ BIT(0)
+/* Valid response message */
+#define OCTEP_CTRL_MBOX_MSG_HDR_FLAG_RESP BIT(1)
+/* Valid notification, no response required */
+#define OCTEP_CTRL_MBOX_MSG_HDR_FLAG_NOTIFY BIT(2)
+
+enum octep_ctrl_mbox_status {
+ OCTEP_CTRL_MBOX_STATUS_INVALID = 0,
+ OCTEP_CTRL_MBOX_STATUS_INIT,
+ OCTEP_CTRL_MBOX_STATUS_READY,
+ OCTEP_CTRL_MBOX_STATUS_UNINIT
+};
+
+/* mbox message */
+union octep_ctrl_mbox_msg_hdr {
+ u64 word0;
+ struct {
+ /* OCTEP_CTRL_MBOX_MSG_HDR_FLAG_* */
+ u32 flags;
+ /* size of message in words excluding header */
+ u32 sizew;
+ };
+};
+
+/* mbox message */
+struct octep_ctrl_mbox_msg {
+ /* mbox transaction header */
+ union octep_ctrl_mbox_msg_hdr hdr;
+ /* pointer to message buffer */
+ void *msg;
+};
+
+/* Mbox queue */
+struct octep_ctrl_mbox_q {
+ /* q element size, should be aligned to unsigned long */
+ u16 elem_sz;
+ /* q element count, should be power of 2 */
+ u16 elem_cnt;
+ /* q mask */
+ u16 mask;
+ /* producer address in bar mem */
+ void __iomem *hw_prod;
+ /* consumer address in bar mem */
+ void __iomem *hw_cons;
+ /* q base address in bar mem */
+ void __iomem *hw_q;
+};
+
+struct octep_ctrl_mbox {
+ /* host driver version */
+ u64 version;
+ /* size of bar memory */
+ u32 barmem_sz;
+ /* pointer to BAR memory */
+ void __iomem *barmem;
+ /* user context for callback, can be null */
+ void *user_ctx;
+ /* callback handler for processing request, called from octep_ctrl_mbox_recv */
+ int (*process_req)(void *user_ctx, struct octep_ctrl_mbox_msg *msg);
+ /* host-to-fw queue */
+ struct octep_ctrl_mbox_q h2fq;
+ /* fw-to-host queue */
+ struct octep_ctrl_mbox_q f2hq;
+ /* lock for h2fq */
+ struct mutex h2fq_lock;
+ /* lock for f2hq */
+ struct mutex f2hq_lock;
+};
+
+/* Initialize control mbox.
+ *
+ * @param mbox: non-null pointer to struct octep_ctrl_mbox.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_ctrl_mbox_init(struct octep_ctrl_mbox *mbox);
+
+/* Send mbox message.
+ *
+ * @param mbox: non-null pointer to struct octep_ctrl_mbox.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_ctrl_mbox_send(struct octep_ctrl_mbox *mbox, struct octep_ctrl_mbox_msg *msg);
+
+/* Retrieve mbox message.
+ *
+ * @param mbox: non-null pointer to struct octep_ctrl_mbox.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_ctrl_mbox_recv(struct octep_ctrl_mbox *mbox, struct octep_ctrl_mbox_msg *msg);
+
+/* Uninitialize control mbox.
+ *
+ * @param ep: non-null pointer to struct octep_ctrl_mbox.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_ctrl_mbox_uninit(struct octep_ctrl_mbox *mbox);
+
+#endif /* __OCTEP_CTRL_MBOX_H__ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
new file mode 100644
index 000000000000..021f888d8f6d
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/etherdevice.h>
+#include <linux/pci.h>
+
+#include "octep_config.h"
+#include "octep_main.h"
+#include "octep_ctrl_net.h"
+
+int octep_get_link_status(struct octep_device *oct)
+{
+ return 0;
+}
+
+void octep_set_link_status(struct octep_device *oct, bool up)
+{
+}
+
+void octep_set_rx_state(struct octep_device *oct, bool up)
+{
+}
+
+int octep_get_mac_addr(struct octep_device *oct, u8 *addr)
+{
+ return -1;
+}
+
+int octep_get_link_info(struct octep_device *oct)
+{
+ return -1;
+}
+
+int octep_set_link_info(struct octep_device *oct, struct octep_iface_link_info *link_info)
+{
+ return -1;
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h
new file mode 100644
index 000000000000..f23b58381322
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_ctrl_net.h
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+#ifndef __OCTEP_CTRL_NET_H__
+#define __OCTEP_CTRL_NET_H__
+
+/* Supported commands */
+enum octep_ctrl_net_cmd {
+ OCTEP_CTRL_NET_CMD_GET = 0,
+ OCTEP_CTRL_NET_CMD_SET,
+};
+
+/* Supported states */
+enum octep_ctrl_net_state {
+ OCTEP_CTRL_NET_STATE_DOWN = 0,
+ OCTEP_CTRL_NET_STATE_UP,
+};
+
+/* Supported replies */
+enum octep_ctrl_net_reply {
+ OCTEP_CTRL_NET_REPLY_OK = 0,
+ OCTEP_CTRL_NET_REPLY_GENERIC_FAIL,
+ OCTEP_CTRL_NET_REPLY_INVALID_PARAM,
+};
+
+/* Supported host to fw commands */
+enum octep_ctrl_net_h2f_cmd {
+ OCTEP_CTRL_NET_H2F_CMD_INVALID = 0,
+ OCTEP_CTRL_NET_H2F_CMD_MTU,
+ OCTEP_CTRL_NET_H2F_CMD_MAC,
+ OCTEP_CTRL_NET_H2F_CMD_GET_IF_STATS,
+ OCTEP_CTRL_NET_H2F_CMD_GET_XSTATS,
+ OCTEP_CTRL_NET_H2F_CMD_GET_Q_STATS,
+ OCTEP_CTRL_NET_H2F_CMD_LINK_STATUS,
+ OCTEP_CTRL_NET_H2F_CMD_RX_STATE,
+ OCTEP_CTRL_NET_H2F_CMD_LINK_INFO,
+};
+
+/* Supported fw to host commands */
+enum octep_ctrl_net_f2h_cmd {
+ OCTEP_CTRL_NET_F2H_CMD_INVALID = 0,
+ OCTEP_CTRL_NET_F2H_CMD_LINK_STATUS,
+};
+
+struct octep_ctrl_net_req_hdr {
+ /* sender id */
+ u16 sender;
+ /* receiver id */
+ u16 receiver;
+ /* octep_ctrl_net_h2t_cmd */
+ u16 cmd;
+ /* reserved */
+ u16 rsvd0;
+};
+
+/* get/set mtu request */
+struct octep_ctrl_net_h2f_req_cmd_mtu {
+ /* enum octep_ctrl_net_cmd */
+ u16 cmd;
+ /* 0-65535 */
+ u16 val;
+};
+
+/* get/set mac request */
+struct octep_ctrl_net_h2f_req_cmd_mac {
+ /* enum octep_ctrl_net_cmd */
+ u16 cmd;
+ /* xx:xx:xx:xx:xx:xx */
+ u8 addr[ETH_ALEN];
+};
+
+/* get if_stats, xstats, q_stats request */
+struct octep_ctrl_net_h2f_req_cmd_get_stats {
+ /* offset into barmem where fw should copy over stats */
+ u32 offset;
+};
+
+/* get/set link state, rx state */
+struct octep_ctrl_net_h2f_req_cmd_state {
+ /* enum octep_ctrl_net_cmd */
+ u16 cmd;
+ /* enum octep_ctrl_net_state */
+ u16 state;
+};
+
+/* link info */
+struct octep_ctrl_net_link_info {
+ /* Bitmap of Supported link speeds/modes */
+ u64 supported_modes;
+ /* Bitmap of Advertised link speeds/modes */
+ u64 advertised_modes;
+ /* Autonegotation state; bit 0=disabled; bit 1=enabled */
+ u8 autoneg;
+ /* Pause frames setting. bit 0=disabled; bit 1=enabled */
+ u8 pause;
+ /* Negotiated link speed in Mbps */
+ u32 speed;
+};
+
+/* get/set link info */
+struct octep_ctrl_net_h2f_req_cmd_link_info {
+ /* enum octep_ctrl_net_cmd */
+ u16 cmd;
+ /* struct octep_ctrl_net_link_info */
+ struct octep_ctrl_net_link_info info;
+};
+
+/* Host to fw request data */
+struct octep_ctrl_net_h2f_req {
+ struct octep_ctrl_net_req_hdr hdr;
+ union {
+ struct octep_ctrl_net_h2f_req_cmd_mtu mtu;
+ struct octep_ctrl_net_h2f_req_cmd_mac mac;
+ struct octep_ctrl_net_h2f_req_cmd_get_stats get_stats;
+ struct octep_ctrl_net_h2f_req_cmd_state link;
+ struct octep_ctrl_net_h2f_req_cmd_state rx;
+ struct octep_ctrl_net_h2f_req_cmd_link_info link_info;
+ };
+} __packed;
+
+struct octep_ctrl_net_resp_hdr {
+ /* sender id */
+ u16 sender;
+ /* receiver id */
+ u16 receiver;
+ /* octep_ctrl_net_h2t_cmd */
+ u16 cmd;
+ /* octep_ctrl_net_reply */
+ u16 reply;
+};
+
+/* get mtu response */
+struct octep_ctrl_net_h2f_resp_cmd_mtu {
+ /* 0-65535 */
+ u16 val;
+};
+
+/* get mac response */
+struct octep_ctrl_net_h2f_resp_cmd_mac {
+ /* xx:xx:xx:xx:xx:xx */
+ u8 addr[ETH_ALEN];
+};
+
+/* get link state, rx state response */
+struct octep_ctrl_net_h2f_resp_cmd_state {
+ /* enum octep_ctrl_net_state */
+ u16 state;
+};
+
+/* Host to fw response data */
+struct octep_ctrl_net_h2f_resp {
+ struct octep_ctrl_net_resp_hdr hdr;
+ union {
+ struct octep_ctrl_net_h2f_resp_cmd_mtu mtu;
+ struct octep_ctrl_net_h2f_resp_cmd_mac mac;
+ struct octep_ctrl_net_h2f_resp_cmd_state link;
+ struct octep_ctrl_net_h2f_resp_cmd_state rx;
+ struct octep_ctrl_net_link_info link_info;
+ };
+} __packed;
+
+/* link state notofication */
+struct octep_ctrl_net_f2h_req_cmd_state {
+ /* enum octep_ctrl_net_state */
+ u16 state;
+};
+
+/* Fw to host request data */
+struct octep_ctrl_net_f2h_req {
+ struct octep_ctrl_net_req_hdr hdr;
+ union {
+ struct octep_ctrl_net_f2h_req_cmd_state link;
+ };
+};
+
+/* Fw to host response data */
+struct octep_ctrl_net_f2h_resp {
+ struct octep_ctrl_net_resp_hdr hdr;
+};
+
+/* Size of host to fw octep_ctrl_mbox queue element */
+union octep_ctrl_net_h2f_data_sz {
+ struct octep_ctrl_net_h2f_req h2f_req;
+ struct octep_ctrl_net_h2f_resp h2f_resp;
+};
+
+/* Size of fw to host octep_ctrl_mbox queue element */
+union octep_ctrl_net_f2h_data_sz {
+ struct octep_ctrl_net_f2h_req f2h_req;
+ struct octep_ctrl_net_f2h_resp f2h_resp;
+};
+
+/* size of host to fw data in words */
+#define OCTEP_CTRL_NET_H2F_DATA_SZW ((sizeof(union octep_ctrl_net_h2f_data_sz)) / \
+ (sizeof(unsigned long)))
+
+/* size of fw to host data in words */
+#define OCTEP_CTRL_NET_F2H_DATA_SZW ((sizeof(union octep_ctrl_net_f2h_data_sz)) / \
+ (sizeof(unsigned long)))
+
+/* size in words of get/set mtu request */
+#define OCTEP_CTRL_NET_H2F_MTU_REQ_SZW 2
+/* size in words of get/set mac request */
+#define OCTEP_CTRL_NET_H2F_MAC_REQ_SZW 2
+/* size in words of get stats request */
+#define OCTEP_CTRL_NET_H2F_GET_STATS_REQ_SZW 2
+/* size in words of get/set state request */
+#define OCTEP_CTRL_NET_H2F_STATE_REQ_SZW 2
+/* size in words of get/set link info request */
+#define OCTEP_CTRL_NET_H2F_LINK_INFO_REQ_SZW 4
+
+/* size in words of get mtu response */
+#define OCTEP_CTRL_NET_H2F_GET_MTU_RESP_SZW 2
+/* size in words of set mtu response */
+#define OCTEP_CTRL_NET_H2F_SET_MTU_RESP_SZW 1
+/* size in words of get mac response */
+#define OCTEP_CTRL_NET_H2F_GET_MAC_RESP_SZW 2
+/* size in words of set mac response */
+#define OCTEP_CTRL_NET_H2F_SET_MAC_RESP_SZW 1
+/* size in words of get state request */
+#define OCTEP_CTRL_NET_H2F_GET_STATE_RESP_SZW 2
+/* size in words of set state request */
+#define OCTEP_CTRL_NET_H2F_SET_STATE_RESP_SZW 1
+/* size in words of get link info request */
+#define OCTEP_CTRL_NET_H2F_GET_LINK_INFO_RESP_SZW 4
+/* size in words of set link info request */
+#define OCTEP_CTRL_NET_H2F_SET_LINK_INFO_RESP_SZW 1
+
+/** Get link status from firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ *
+ * return value: link status 0=down, 1=up.
+ */
+int octep_get_link_status(struct octep_device *oct);
+
+/** Set link status in firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ * @param up: boolean status.
+ */
+void octep_set_link_status(struct octep_device *oct, bool up);
+
+/** Set rx state in firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ * @param up: boolean status.
+ */
+void octep_set_rx_state(struct octep_device *oct, bool up);
+
+/** Get mac address from firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ * @param addr: non-null pointer to mac address.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_get_mac_addr(struct octep_device *oct, u8 *addr);
+
+/** Set mac address in firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ * @param addr: non-null pointer to mac address.
+ */
+int octep_set_mac_addr(struct octep_device *oct, u8 *addr);
+
+/** Set mtu in firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ * @param mtu: mtu.
+ */
+int octep_set_mtu(struct octep_device *oct, int mtu);
+
+/** Get interface statistics from firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_get_if_stats(struct octep_device *oct);
+
+/** Get link info from firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ *
+ * return value: 0 on success, -errno on failure.
+ */
+int octep_get_link_info(struct octep_device *oct);
+
+/** Set link info in firmware.
+ *
+ * @param oct: non-null pointer to struct octep_device.
+ */
+int octep_set_link_info(struct octep_device *oct, struct octep_iface_link_info *link_info);
+
+#endif /* __OCTEP_CTRL_NET_H__ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
new file mode 100644
index 000000000000..3b55510b2550
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/vmalloc.h>
+
+#include "octep_config.h"
+#include "octep_main.h"
+#include "octep_ctrl_net.h"
+
+static struct workqueue_struct *octep_wq;
+
+/* Supported Devices */
+static const struct pci_device_id octep_pci_id_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, OCTEP_PCI_DEVICE_ID_CN93_PF)},
+ {0, },
+};
+MODULE_DEVICE_TABLE(pci, octep_pci_id_tbl);
+
+MODULE_AUTHOR("Veerasenareddy Burru <vburru@...vell.com>");
+MODULE_DESCRIPTION(OCTEP_DRV_STRING);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(OCTEP_DRV_VERSION_STR);
+
+static void octep_link_up(struct net_device *netdev)
+{
+ netif_carrier_on(netdev);
+ netif_tx_start_all_queues(netdev);
+}
+
+/**
+ * octep_open() - start the octeon network device.
+ *
+ * @netdev: pointer to kernel network device.
+ *
+ * setup Tx/Rx queues, interrupts and enable hardware operation of Tx/Rx queues
+ * and interrupts..
+ *
+ * Return: 0, on successfully setting up device and bring it up.
+ * -1, on any error.
+ */
+static int octep_open(struct net_device *netdev)
+{
+ struct octep_device *oct = netdev_priv(netdev);
+ int err, ret;
+
+ netdev_info(netdev, "Starting netdev ...\n");
+ netif_carrier_off(netdev);
+
+ oct->hw_ops.reset_io_queues(oct);
+
+ if (octep_setup_iqs(oct))
+ goto setup_iq_err;
+ if (octep_setup_oqs(oct))
+ goto setup_oq_err;
+
+ err = netif_set_real_num_tx_queues(netdev, oct->num_oqs);
+ if (err)
+ goto set_queues_err;
+ err = netif_set_real_num_rx_queues(netdev, oct->num_iqs);
+ if (err)
+ goto set_queues_err;
+
+ oct->link_info.admin_up = 1;
+ octep_set_rx_state(oct, true);
+
+ ret = octep_get_link_status(oct);
+ if (!ret)
+ octep_set_link_status(oct, true);
+
+ /* Enable the input and output queues for this Octeon device */
+ oct->hw_ops.enable_io_queues(oct);
+
+ /* Enable Octeon device interrupts */
+ oct->hw_ops.enable_interrupts(oct);
+
+ octep_oq_dbell_init(oct);
+
+ ret = octep_get_link_status(oct);
+ if (ret)
+ octep_link_up(netdev);
+
+ return 0;
+
+set_queues_err:
+ octep_free_oqs(oct);
+setup_oq_err:
+ octep_free_iqs(oct);
+setup_iq_err:
+ return -1;
+}
+
+/**
+ * octep_stop() - stop the octeon network device.
+ *
+ * @netdev: pointer to kernel network device.
+ *
+ * stop the device Tx/Rx operations, bring down the link and
+ * free up all resources allocated for Tx/Rx queues and interrupts.
+ */
+static int octep_stop(struct net_device *netdev)
+{
+ struct octep_device *oct = netdev_priv(netdev);
+
+ netdev_info(netdev, "Stopping the device ...\n");
+
+ /* Stop Tx from stack */
+ netif_tx_stop_all_queues(netdev);
+ netif_carrier_off(netdev);
+ netif_tx_disable(netdev);
+
+ octep_set_link_status(oct, false);
+ octep_set_rx_state(oct, false);
+
+ oct->link_info.admin_up = 0;
+ oct->link_info.oper_up = 0;
+
+ oct->hw_ops.disable_interrupts(oct);
+
+ octep_clean_iqs(oct);
+
+ oct->hw_ops.disable_io_queues(oct);
+ oct->hw_ops.reset_io_queues(oct);
+ octep_free_oqs(oct);
+ octep_free_iqs(oct);
+ netdev_info(netdev, "Device stopped !!\n");
+ return 0;
+}
+
+/**
+ * octep_start_xmit() - Enqueue packet to Octoen hardware Tx Queue.
+ *
+ * @skb: packet skbuff pointer.
+ * @netdev: kernel network device.
+ *
+ * Return: NETDEV_TX_BUSY, if Tx Queue is full.
+ * NETDEV_TX_OK, if successfully enqueued to hardware Tx queue.
+ */
+static netdev_tx_t octep_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ return NETDEV_TX_OK;
+}
+
+/**
+ * octep_tx_timeout_task - work queue task to Handle Tx queue timeout.
+ *
+ * @work: pointer to Tx queue timeout work_struct
+ *
+ * Stop and start the device so that it frees up all queue resources
+ * and restarts the queues, that potentially clears a Tx queue timeout
+ * condition.
+ **/
+static void octep_tx_timeout_task(struct work_struct *work)
+{
+ struct octep_device *oct = container_of(work, struct octep_device,
+ tx_timeout_task);
+ struct net_device *netdev = oct->netdev;
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ octep_stop(netdev);
+ octep_open(netdev);
+ }
+ rtnl_unlock();
+}
+
+/**
+ * octep_tx_timeout() - Handle Tx Queue timeout.
+ *
+ * @netdev: pointer to kernel network device.
+ * @txqueue: Timed out Tx queue number.
+ *
+ * Schedule a work to handle Tx queue timeout.
+ */
+static void octep_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+{
+ struct octep_device *oct = netdev_priv(netdev);
+
+ queue_work(octep_wq, &oct->tx_timeout_task);
+}
+
+static const struct net_device_ops octep_netdev_ops = {
+ .ndo_open = octep_open,
+ .ndo_stop = octep_stop,
+ .ndo_start_xmit = octep_start_xmit,
+ .ndo_tx_timeout = octep_tx_timeout,
+};
+
+/**
+ * octep_ctrl_mbox_task - work queue task to handle ctrl mbox messages.
+ *
+ * @work: pointer to ctrl mbox work_struct
+ *
+ * Poll ctrl mbox message queue and handle control messages from firmware.
+ **/
+static void octep_ctrl_mbox_task(struct work_struct *work)
+{
+ struct octep_device *oct = container_of(work, struct octep_device,
+ ctrl_mbox_task);
+ struct net_device *netdev = oct->netdev;
+ struct octep_ctrl_net_f2h_req req = {};
+ struct octep_ctrl_mbox_msg msg;
+ int ret = 0;
+
+ msg.msg = &req;
+ while (true) {
+ ret = octep_ctrl_mbox_recv(&oct->ctrl_mbox, &msg);
+ if (ret)
+ break;
+
+ switch (req.hdr.cmd) {
+ case OCTEP_CTRL_NET_F2H_CMD_LINK_STATUS:
+ if (netif_running(netdev)) {
+ if (req.link.state) {
+ dev_info(&oct->pdev->dev, "netif_carrier_on\n");
+ netif_carrier_on(netdev);
+ } else {
+ dev_info(&oct->pdev->dev, "netif_carrier_off\n");
+ netif_carrier_off(netdev);
+ }
+ }
+ break;
+ default:
+ pr_info("Unknown mbox req : %u\n", req.hdr.cmd);
+ break;
+ }
+ }
+}
+
+/**
+ * octep_device_setup() - Setup Octeon Device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Setup Octeon device hardware operations, configuration, etc ...
+ */
+int octep_device_setup(struct octep_device *oct)
+{
+ struct octep_ctrl_mbox *ctrl_mbox;
+ struct pci_dev *pdev = oct->pdev;
+ int i, ret;
+
+ /* allocate memory for oct->conf */
+ oct->conf = kzalloc(sizeof(*oct->conf), GFP_KERNEL);
+ if (!oct->conf)
+ return -ENOMEM;
+
+ /* Map BAR regions */
+ for (i = 0; i < OCTEP_MMIO_REGIONS; i++) {
+ oct->mmio[i].hw_addr =
+ ioremap(pci_resource_start(oct->pdev, i * 2),
+ pci_resource_len(oct->pdev, i * 2));
+ oct->mmio[i].mapped = 1;
+ }
+
+ oct->chip_id = pdev->device;
+ oct->rev_id = pdev->revision;
+ dev_info(&pdev->dev, "chip_id = 0x%x\n", pdev->device);
+
+ switch (oct->chip_id) {
+ case OCTEP_PCI_DEVICE_ID_CN93_PF:
+ dev_info(&pdev->dev,
+ "Setting up OCTEON CN93XX PF PASS%d.%d\n",
+ OCTEP_MAJOR_REV(oct), OCTEP_MINOR_REV(oct));
+ octep_device_setup_cn93_pf(oct);
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "%s: unsupported device\n", __func__);
+ goto unsupported_dev;
+ }
+
+ oct->pkind = CFG_GET_IQ_PKIND(oct->conf);
+
+ /* Initialize control mbox */
+ ctrl_mbox = &oct->ctrl_mbox;
+ ctrl_mbox->version = OCTEP_DRV_VERSION;
+ ctrl_mbox->barmem = CFG_GET_CTRL_MBOX_MEM_ADDR(oct->conf);
+ ret = octep_ctrl_mbox_init(ctrl_mbox);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize control mbox\n");
+ return -1;
+ }
+ oct->ctrl_mbox_ifstats_offset = OCTEP_CTRL_MBOX_SZ(ctrl_mbox->h2fq.elem_sz,
+ ctrl_mbox->h2fq.elem_cnt,
+ ctrl_mbox->f2hq.elem_sz,
+ ctrl_mbox->f2hq.elem_cnt);
+
+ return 0;
+
+unsupported_dev:
+ return -1;
+}
+
+/**
+ * octep_device_cleanup() - Cleanup Octeon Device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Cleanup Octeon device allocated resources.
+ */
+static void octep_device_cleanup(struct octep_device *oct)
+{
+ int i;
+
+ dev_info(&oct->pdev->dev, "Cleaning up Octeon Device ...\n");
+
+ for (i = 0; i < OCTEP_MAX_VF; i++) {
+ if (oct->mbox[i])
+ vfree(oct->mbox[i]);
+ oct->mbox[i] = NULL;
+ }
+
+ octep_ctrl_mbox_uninit(&oct->ctrl_mbox);
+
+ oct->hw_ops.soft_reset(oct);
+ for (i = 0; i < OCTEP_MMIO_REGIONS; i++) {
+ if (oct->mmio[i].mapped)
+ iounmap(oct->mmio[i].hw_addr);
+ }
+
+ kfree(oct->conf);
+ oct->conf = NULL;
+}
+
+/**
+ * octep_probe() - Octeon PCI device probe handler.
+ *
+ * @pdev: PCI device structure.
+ * @ent: entry in Octeon PCI device ID table.
+ *
+ * Initializes and enables the Octeon PCI device for network operations.
+ * Initializes Octeon private data structure and registers a network device.
+ */
+static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct octep_device *octep_dev = NULL;
+ struct net_device *netdev;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ return err;
+ }
+
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pdev->dev, "Failed to set DMA mask !!\n");
+ goto err_dma_mask;
+ }
+
+ err = pci_request_mem_regions(pdev, OCTEP_DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to map PCI memory regions\n");
+ goto err_pci_regions;
+ }
+
+ pci_enable_pcie_error_reporting(pdev);
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev_mq(sizeof(struct octep_device),
+ OCTEP_MAX_QUEUES);
+ if (!netdev) {
+ dev_err(&pdev->dev, "Failed to allocate netdev\n");
+ err = -ENOMEM;
+ goto err_alloc_netdev;
+ }
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ octep_dev = netdev_priv(netdev);
+ octep_dev->netdev = netdev;
+ octep_dev->pdev = pdev;
+ octep_dev->dev = &pdev->dev;
+ pci_set_drvdata(pdev, octep_dev);
+
+ err = octep_device_setup(octep_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Device setup failed\n");
+ goto err_octep_config;
+ }
+ INIT_WORK(&octep_dev->tx_timeout_task, octep_tx_timeout_task);
+ INIT_WORK(&octep_dev->ctrl_mbox_task, octep_ctrl_mbox_task);
+
+ netdev->netdev_ops = &octep_netdev_ops;
+ netif_carrier_off(netdev);
+
+ netdev->hw_features = NETIF_F_SG;
+ netdev->features |= netdev->hw_features;
+ netdev->min_mtu = OCTEP_MIN_MTU;
+ netdev->max_mtu = OCTEP_MAX_MTU;
+ netdev->mtu = OCTEP_DEFAULT_MTU;
+
+ octep_get_mac_addr(octep_dev, octep_dev->mac_addr);
+ eth_hw_addr_set(netdev, octep_dev->mac_addr);
+
+ if (register_netdev(netdev)) {
+ dev_err(&pdev->dev, "Failed to register netdev\n");
+ goto register_dev_err;
+ }
+ dev_info(&pdev->dev, "Device probe successful\n");
+ return 0;
+
+register_dev_err:
+ octep_device_cleanup(octep_dev);
+err_octep_config:
+ free_netdev(netdev);
+err_alloc_netdev:
+ pci_disable_pcie_error_reporting(pdev);
+ pci_release_mem_regions(pdev);
+err_pci_regions:
+err_dma_mask:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * octep_remove() - Remove Octeon PCI device from driver control.
+ *
+ * @pdev: PCI device structure of the Octeon device.
+ *
+ * Cleanup all resources allocated for the Octeon device.
+ * Unregister from network device and disable the PCI device.
+ */
+static void octep_remove(struct pci_dev *pdev)
+{
+ struct octep_device *oct = pci_get_drvdata(pdev);
+ struct net_device *netdev;
+
+ if (!oct)
+ return;
+
+ cancel_work_sync(&oct->tx_timeout_task);
+ cancel_work_sync(&oct->ctrl_mbox_task);
+ netdev = oct->netdev;
+ if (netdev->reg_state == NETREG_REGISTERED)
+ unregister_netdev(netdev);
+
+ octep_device_cleanup(oct);
+ pci_release_mem_regions(pdev);
+ free_netdev(netdev);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver octep_driver = {
+ .name = OCTEP_DRV_NAME,
+ .id_table = octep_pci_id_tbl,
+ .probe = octep_probe,
+ .remove = octep_remove,
+};
+
+/**
+ * octep_init_module() - Module initialiation.
+ *
+ * create common resource for the driver and register PCI driver.
+ */
+static int __init octep_init_module(void)
+{
+ int ret;
+
+ pr_info("%s: Loading %s ...\n", OCTEP_DRV_NAME, OCTEP_DRV_STRING);
+
+ /* work queue for all deferred tasks */
+ octep_wq = create_singlethread_workqueue(OCTEP_DRV_NAME);
+ if (!octep_wq) {
+ pr_err("%s: Failed to create common workqueue\n",
+ OCTEP_DRV_NAME);
+ return -ENOMEM;
+ }
+
+ ret = pci_register_driver(&octep_driver);
+ if (ret < 0) {
+ pr_err("%s: Failed to register PCI driver; err=%d\n",
+ OCTEP_DRV_NAME, ret);
+ return ret;
+ }
+
+ pr_info("%s: Loaded successfully !\n", OCTEP_DRV_NAME);
+
+ return ret;
+}
+
+/**
+ * octep_exit_module() - Module exit routine.
+ *
+ * unregister the driver with PCI subsystem and cleanup common resources.
+ */
+static void __exit octep_exit_module(void)
+{
+ pr_info("%s: Unloading ...\n", OCTEP_DRV_NAME);
+
+ pci_unregister_driver(&octep_driver);
+ destroy_workqueue(octep_wq);
+
+ pr_info("%s: Unloading complete\n", OCTEP_DRV_NAME);
+}
+
+module_init(octep_init_module);
+module_exit(octep_exit_module);
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
new file mode 100644
index 000000000000..4950b4418035
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
@@ -0,0 +1,364 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_MAIN_H_
+#define _OCTEP_MAIN_H_
+
+#include "octep_tx.h"
+#include "octep_rx.h"
+#include "octep_ctrl_mbox.h"
+
+#define OCTEP_DRV_VERSION_MAJOR 1
+#define OCTEP_DRV_VERSION_MINOR 0
+#define OCTEP_DRV_VERSION_VARIANT 0
+
+#define OCTEP_DRV_VERSION ((OCTEP_DRV_VERSION_MAJOR << 16) + \
+ (OCTEP_DRV_VERSION_MINOR << 8) + \
+ OCTEP_DRV_VERSION_VARIANT)
+
+#define OCTEP_DRV_VERSION_STR "1.0.0"
+#define OCTEP_DRV_NAME "octeon_ep"
+#define OCTEP_DRV_STRING "Marvell Octeon EndPoint NIC Driver"
+
+#define OCTEP_PCIID_CN93_PF 0xB200177d
+#define OCTEP_PCIID_CN93_VF 0xB203177d
+
+#define OCTEP_PCI_DEVICE_ID_CN93_PF 0xB200
+#define OCTEP_PCI_DEVICE_ID_CN93_VF 0xB203
+
+#define OCTEP_MAX_QUEUES 63
+#define OCTEP_MAX_IQ OCTEP_MAX_QUEUES
+#define OCTEP_MAX_OQ OCTEP_MAX_QUEUES
+#define OCTEP_MAX_VF 64
+
+#define OCTEP_MAX_MSIX_VECTORS OCTEP_MAX_OQ
+
+/* Flags to disable and enable Interrupts */
+#define OCTEP_INPUT_INTR (1)
+#define OCTEP_OUTPUT_INTR (2)
+#define OCTEP_MBOX_INTR (4)
+#define OCTEP_ALL_INTR 0xff
+
+#define OCTEP_IQ_INTR_RESEND_BIT 59
+#define OCTEP_OQ_INTR_RESEND_BIT 59
+
+#define OCTEP_MMIO_REGIONS 3
+/* PCI address space mapping information.
+ * Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of
+ * Octeon gets mapped to different physical address spaces in
+ * the kernel.
+ */
+struct octep_mmio {
+ /* The physical address to which the PCI address space is mapped. */
+ u8 __iomem *hw_addr;
+
+ /* Flag indicating the mapping was successful. */
+ int mapped;
+};
+
+struct octep_pci_win_regs {
+ u8 __iomem *pci_win_wr_addr;
+ u8 __iomem *pci_win_rd_addr;
+ u8 __iomem *pci_win_wr_data;
+ u8 __iomem *pci_win_rd_data;
+};
+
+struct octep_hw_ops {
+ void (*setup_iq_regs)(struct octep_device *oct, int q);
+ void (*setup_oq_regs)(struct octep_device *oct, int q);
+ void (*setup_mbox_regs)(struct octep_device *oct, int mbox);
+
+ irqreturn_t (*non_ioq_intr_handler)(void *ioq_vector);
+ irqreturn_t (*ioq_intr_handler)(void *ioq_vector);
+ int (*soft_reset)(struct octep_device *oct);
+ void (*reinit_regs)(struct octep_device *oct);
+ u32 (*update_iq_read_idx)(struct octep_iq *iq);
+
+ void (*enable_interrupts)(struct octep_device *oct);
+ void (*disable_interrupts)(struct octep_device *oct);
+
+ void (*enable_io_queues)(struct octep_device *oct);
+ void (*disable_io_queues)(struct octep_device *oct);
+ void (*enable_iq)(struct octep_device *oct, int q);
+ void (*disable_iq)(struct octep_device *oct, int q);
+ void (*enable_oq)(struct octep_device *oct, int q);
+ void (*disable_oq)(struct octep_device *oct, int q);
+ void (*reset_io_queues)(struct octep_device *oct);
+ void (*dump_registers)(struct octep_device *oct);
+};
+
+/* Octeon mailbox data */
+struct octep_mbox_data {
+ u32 cmd;
+ u32 total_len;
+ u32 recv_len;
+ u32 rsvd;
+ u64 *data;
+};
+
+/* Octeon device mailbox */
+struct octep_mbox {
+ /* A spinlock to protect access to this q_mbox. */
+ spinlock_t lock;
+
+ u32 q_no;
+ u32 state;
+
+ /* SLI_MAC_PF_MBOX_INT for PF, SLI_PKT_MBOX_INT for VF. */
+ void *mbox_int_reg;
+
+ /* SLI_PKT_PF_VF_MBOX_SIG(0) for PF,
+ * SLI_PKT_PF_VF_MBOX_SIG(1) for VF.
+ */
+ void *mbox_write_reg;
+
+ /* SLI_PKT_PF_VF_MBOX_SIG(1) for PF,
+ * SLI_PKT_PF_VF_MBOX_SIG(0) for VF.
+ */
+ void *mbox_read_reg;
+
+ struct octep_mbox_data mbox_data;
+};
+
+/* Tx/Rx queue vector per interrupt. */
+struct octep_ioq_vector {
+ char name[OCTEP_MSIX_NAME_SIZE];
+ struct napi_struct napi;
+ struct octep_device *octep_dev;
+ struct octep_iq *iq;
+ struct octep_oq *oq;
+ cpumask_t affinity_mask;
+};
+
+/* Octeon hardware/firmware offload capability flags. */
+#define OCTEP_CAP_TX_CHECKSUM BIT(0)
+#define OCTEP_CAP_RX_CHECKSUM BIT(1)
+#define OCTEP_CAP_TSO BIT(2)
+
+/* Link modes */
+enum octep_link_mode_bit_indices {
+ OCTEP_LINK_MODE_10GBASE_T = 0,
+ OCTEP_LINK_MODE_10GBASE_R,
+ OCTEP_LINK_MODE_10GBASE_CR,
+ OCTEP_LINK_MODE_10GBASE_KR,
+ OCTEP_LINK_MODE_10GBASE_LR,
+ OCTEP_LINK_MODE_10GBASE_SR,
+ OCTEP_LINK_MODE_25GBASE_CR,
+ OCTEP_LINK_MODE_25GBASE_KR,
+ OCTEP_LINK_MODE_25GBASE_SR,
+ OCTEP_LINK_MODE_40GBASE_CR4,
+ OCTEP_LINK_MODE_40GBASE_KR4,
+ OCTEP_LINK_MODE_40GBASE_LR4,
+ OCTEP_LINK_MODE_40GBASE_SR4,
+ OCTEP_LINK_MODE_50GBASE_CR2,
+ OCTEP_LINK_MODE_50GBASE_KR2,
+ OCTEP_LINK_MODE_50GBASE_SR2,
+ OCTEP_LINK_MODE_50GBASE_CR,
+ OCTEP_LINK_MODE_50GBASE_KR,
+ OCTEP_LINK_MODE_50GBASE_LR,
+ OCTEP_LINK_MODE_50GBASE_SR,
+ OCTEP_LINK_MODE_100GBASE_CR4,
+ OCTEP_LINK_MODE_100GBASE_KR4,
+ OCTEP_LINK_MODE_100GBASE_LR4,
+ OCTEP_LINK_MODE_100GBASE_SR4,
+ OCTEP_LINK_MODE_NBITS
+};
+
+/* Hardware interface link state information. */
+struct octep_iface_link_info {
+ /* Bitmap of Supported link speeds/modes. */
+ u64 supported_modes;
+
+ /* Bitmap of Advertised link speeds/modes. */
+ u64 advertised_modes;
+
+ /* Negotiated link speed in Mbps. */
+ u32 speed;
+
+ /* MTU */
+ u16 mtu;
+
+ /* Autonegotation state. */
+#define OCTEP_LINK_MODE_AUTONEG_SUPPORTED BIT(0)
+#define OCTEP_LINK_MODE_AUTONEG_ADVERTISED BIT(1)
+ u8 autoneg;
+
+ /* Pause frames setting. */
+#define OCTEP_LINK_MODE_PAUSE_SUPPORTED BIT(0)
+#define OCTEP_LINK_MODE_PAUSE_ADVERTISED BIT(1)
+ u8 pause;
+
+ /* Admin state of the link (ifconfig <iface> up/down */
+ u8 admin_up;
+
+ /* Operational state of the link: physical link is up down */
+ u8 oper_up;
+};
+
+/* The Octeon device specific private data structure.
+ * Each Octeon device has this structure to represent all its components.
+ */
+struct octep_device {
+ struct octep_config *conf;
+
+ /* Octeon Chip type. */
+ u16 chip_id;
+ u16 rev_id;
+
+ /* Device capabilities enabled */
+ u64 caps_enabled;
+ /* Device capabilities supported */
+ u64 caps_supported;
+
+ /* Pointer to basic Linux device */
+ struct device *dev;
+ /* Linux PCI device pointer */
+ struct pci_dev *pdev;
+ /* Netdev corresponding to the Octeon device */
+ struct net_device *netdev;
+
+ /* memory mapped io range */
+ struct octep_mmio mmio[OCTEP_MMIO_REGIONS];
+
+ /* MAC address */
+ u8 mac_addr[ETH_ALEN];
+
+ /* Tx queues (IQ: Instruction Queue) */
+ u16 num_iqs;
+ /* pkind value to be used in every Tx hardware descriptor */
+ u8 pkind;
+ /* Pointers to Octeon Tx queues */
+ struct octep_iq *iq[OCTEP_MAX_IQ];
+
+ /* Rx queues (OQ: Output Queue) */
+ u16 num_oqs;
+ /* Pointers to Octeon Rx queues */
+ struct octep_oq *oq[OCTEP_MAX_OQ];
+
+ /* Hardware port number of the PCIe interface */
+ u16 pcie_port;
+
+ /* PCI Window registers to access some hardware CSRs */
+ struct octep_pci_win_regs pci_win_regs;
+ /* Hardware operations */
+ struct octep_hw_ops hw_ops;
+
+ /* IRQ info */
+ u16 num_irqs;
+ u16 num_non_ioq_irqs;
+ char *non_ioq_irq_names;
+ struct msix_entry *msix_entries;
+ /* IOq information of it's corresponding MSI-X interrupt. */
+ struct octep_ioq_vector *ioq_vector[OCTEP_MAX_QUEUES];
+
+ /* Hardware Interface Tx statistics */
+ struct octep_iface_tx_stats iface_tx_stats;
+ /* Hardware Interface Rx statistics */
+ struct octep_iface_rx_stats iface_rx_stats;
+
+ /* Hardware Interface Link info like supported modes, aneg support */
+ struct octep_iface_link_info link_info;
+
+ /* Mailbox to talk to VFs */
+ struct octep_mbox *mbox[OCTEP_MAX_VF];
+
+ /* Work entry to handle Tx timeout */
+ struct work_struct tx_timeout_task;
+
+ /* control mbox over pf */
+ struct octep_ctrl_mbox ctrl_mbox;
+
+ /* offset for iface stats */
+ u32 ctrl_mbox_ifstats_offset;
+
+ /* Work entry to handle ctrl mbox interrupt */
+ struct work_struct ctrl_mbox_task;
+
+};
+
+static inline u16 OCTEP_MAJOR_REV(struct octep_device *oct)
+{
+ u16 rev = (oct->rev_id & 0xC) >> 2;
+
+ return (rev == 0) ? 1 : rev;
+}
+
+static inline u16 OCTEP_MINOR_REV(struct octep_device *oct)
+{
+ return (oct->rev_id & 0x3);
+}
+
+/* Octeon CSR read/write access APIs */
+#define octep_write_csr(octep_dev, reg_off, value) \
+ writel(value, (u8 *)(octep_dev)->mmio[0].hw_addr + (reg_off))
+
+#define octep_write_csr64(octep_dev, reg_off, val64) \
+ writeq(val64, (octep_dev)->mmio[0].hw_addr + (reg_off))
+
+#define octep_read_csr(octep_dev, reg_off) \
+ readl((u8 *)(octep_dev)->mmio[0].hw_addr + (reg_off))
+
+#define octep_read_csr64(octep_dev, reg_off) \
+ readq((octep_dev)->mmio[0].hw_addr + (reg_off))
+
+/* Read windowed register.
+ * @param oct - pointer to the Octeon device.
+ * @param addr - Address of the register to read.
+ *
+ * This routine is called to read from the indirectly accessed
+ * Octeon registers that are visible through a PCI BAR0 mapped window
+ * register.
+ * @return - 64 bit value read from the register.
+ */
+static inline u64
+OCTEP_PCI_WIN_READ(struct octep_device *oct, u64 addr)
+{
+ u64 val64;
+
+ addr |= 1ull << 53; /* read 8 bytes */
+ writeq(addr, oct->pci_win_regs.pci_win_rd_addr);
+ val64 = readq(oct->pci_win_regs.pci_win_rd_data);
+
+ dev_dbg(&oct->pdev->dev,
+ "%s: reg: 0x%016llx val: 0x%016llx\n", __func__, addr, val64);
+
+ return val64;
+}
+
+/* Write windowed register.
+ * @param oct - pointer to the Octeon device.
+ * @param addr - Address of the register to write
+ * @param val - Value to write
+ *
+ * This routine is called to write to the indirectly accessed
+ * Octeon registers that are visible through a PCI BAR0 mapped window
+ * register.
+ * @return Nothing.
+ */
+static inline void
+OCTEP_PCI_WIN_WRITE(struct octep_device *oct, u64 addr, u64 val)
+{
+ writeq(addr, oct->pci_win_regs.pci_win_wr_addr);
+ writeq(val, oct->pci_win_regs.pci_win_wr_data);
+
+ dev_dbg(&oct->pdev->dev,
+ "%s: reg: 0x%016llx val: 0x%016llx\n", __func__, addr, val);
+}
+
+int octep_device_setup(struct octep_device *oct);
+int octep_setup_iqs(struct octep_device *oct);
+void octep_free_iqs(struct octep_device *oct);
+void octep_clean_iqs(struct octep_device *oct);
+int octep_setup_oqs(struct octep_device *oct);
+void octep_free_oqs(struct octep_device *oct);
+void octep_oq_dbell_init(struct octep_device *oct);
+void octep_device_setup_cn93_pf(struct octep_device *oct);
+int octep_iq_process_completions(struct octep_iq *iq, u16 budget);
+int octep_oq_process_rx(struct octep_oq *oq, int budget);
+void octep_set_ethtool_ops(struct net_device *netdev);
+
+#endif /* _OCTEP_MAIN_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h b/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
new file mode 100644
index 000000000000..cc51149790ff
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
@@ -0,0 +1,367 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_REGS_CN9K_PF_H_
+#define _OCTEP_REGS_CN9K_PF_H_
+
+/* ############################ RST ######################### */
+#define CN93_RST_BOOT 0x000087E006001600ULL
+#define CN93_RST_CORE_DOMAIN_W1S 0x000087E006001820ULL
+#define CN93_RST_CORE_DOMAIN_W1C 0x000087E006001828ULL
+
+#define CN93_CONFIG_XPANSION_BAR 0x38
+#define CN93_CONFIG_PCIE_CAP 0x70
+#define CN93_CONFIG_PCIE_DEVCAP 0x74
+#define CN93_CONFIG_PCIE_DEVCTL 0x78
+#define CN93_CONFIG_PCIE_LINKCAP 0x7C
+#define CN93_CONFIG_PCIE_LINKCTL 0x80
+#define CN93_CONFIG_PCIE_SLOTCAP 0x84
+#define CN93_CONFIG_PCIE_SLOTCTL 0x88
+
+#define CN93_PCIE_SRIOV_FDL 0x188 /* 0x98 */
+#define CN93_PCIE_SRIOV_FDL_BIT_POS 0x10
+#define CN93_PCIE_SRIOV_FDL_MASK 0xFF
+
+#define CN93_CONFIG_PCIE_FLTMSK 0x720
+
+/* ################# Offsets of RING, EPF, MAC ######################### */
+#define CN93_RING_OFFSET (0x1ULL << 17)
+#define CN93_EPF_OFFSET (0x1ULL << 25)
+#define CN93_MAC_OFFSET (0x1ULL << 4)
+#define CN93_BIT_ARRAY_OFFSET (0x1ULL << 4)
+#define CN93_EPVF_RING_OFFSET (0x1ULL << 4)
+
+/* ################# Scratch Registers ######################### */
+#define CN93_SDP_EPF_SCRATCH 0x205E0
+
+/* ################# Window Registers ######################### */
+#define CN93_SDP_WIN_WR_ADDR64 0x20000
+#define CN93_SDP_WIN_RD_ADDR64 0x20010
+#define CN93_SDP_WIN_WR_DATA64 0x20020
+#define CN93_SDP_WIN_WR_MASK_REG 0x20030
+#define CN93_SDP_WIN_RD_DATA64 0x20040
+
+#define CN93_SDP_MAC_NUMBER 0x2C100
+
+/* ################# Global Previliged registers ######################### */
+#define CN93_SDP_EPF_RINFO 0x205F0
+
+#define CN93_SDP_EPF_RINFO_SRN(val) ((val) & 0xFF)
+#define CN93_SDP_EPF_RINFO_RPVF(val) (((val) >> 32) & 0xF)
+#define CN93_SDP_EPF_RINFO_NVFS(val) (((val) >> 48) && 0xFF)
+
+/* SDP Function select */
+#define CN93_SDP_FUNC_SEL_EPF_BIT_POS 8
+#define CN93_SDP_FUNC_SEL_FUNC_BIT_POS 0
+
+/* ##### RING IN (Into device from PCI: Tx Ring) REGISTERS #### */
+#define CN93_SDP_R_IN_CONTROL_START 0x10000
+#define CN93_SDP_R_IN_ENABLE_START 0x10010
+#define CN93_SDP_R_IN_INSTR_BADDR_START 0x10020
+#define CN93_SDP_R_IN_INSTR_RSIZE_START 0x10030
+#define CN93_SDP_R_IN_INSTR_DBELL_START 0x10040
+#define CN93_SDP_R_IN_CNTS_START 0x10050
+#define CN93_SDP_R_IN_INT_LEVELS_START 0x10060
+#define CN93_SDP_R_IN_PKT_CNT_START 0x10080
+#define CN93_SDP_R_IN_BYTE_CNT_START 0x10090
+
+#define CN93_SDP_R_IN_CONTROL(ring) \
+ (CN93_SDP_R_IN_CONTROL_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_ENABLE(ring) \
+ (CN93_SDP_R_IN_ENABLE_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_INSTR_BADDR(ring) \
+ (CN93_SDP_R_IN_INSTR_BADDR_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_INSTR_RSIZE(ring) \
+ (CN93_SDP_R_IN_INSTR_RSIZE_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_INSTR_DBELL(ring) \
+ (CN93_SDP_R_IN_INSTR_DBELL_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_CNTS(ring) \
+ (CN93_SDP_R_IN_CNTS_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_INT_LEVELS(ring) \
+ (CN93_SDP_R_IN_INT_LEVELS_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_PKT_CNT(ring) \
+ (CN93_SDP_R_IN_PKT_CNT_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_BYTE_CNT(ring) \
+ (CN93_SDP_R_IN_BYTE_CNT_START + ((ring) * CN93_RING_OFFSET))
+
+/* Rings per Virtual Function */
+#define CN93_R_IN_CTL_RPVF_MASK (0xF)
+#define CN93_R_IN_CTL_RPVF_POS (48)
+
+/* Number of instructions to be read in one MAC read request.
+ * setting to Max value(4)
+ */
+#define CN93_R_IN_CTL_IDLE (0x1ULL << 28)
+#define CN93_R_IN_CTL_RDSIZE (0x3ULL << 25)
+#define CN93_R_IN_CTL_IS_64B (0x1ULL << 24)
+#define CN93_R_IN_CTL_D_NSR (0x1ULL << 8)
+#define CN93_R_IN_CTL_D_ESR (0x1ULL << 6)
+#define CN93_R_IN_CTL_D_ROR (0x1ULL << 5)
+#define CN93_R_IN_CTL_NSR (0x1ULL << 3)
+#define CN93_R_IN_CTL_ESR (0x1ULL << 1)
+#define CN93_R_IN_CTL_ROR (0x1ULL << 0)
+
+#define CN93_R_IN_CTL_MASK (CN93_R_IN_CTL_RDSIZE | CN93_R_IN_CTL_IS_64B)
+
+/* ##### RING OUT (out from device to PCI host: Rx Ring) REGISTERS #### */
+#define CN93_SDP_R_OUT_CNTS_START 0x10100
+#define CN93_SDP_R_OUT_INT_LEVELS_START 0x10110
+#define CN93_SDP_R_OUT_SLIST_BADDR_START 0x10120
+#define CN93_SDP_R_OUT_SLIST_RSIZE_START 0x10130
+#define CN93_SDP_R_OUT_SLIST_DBELL_START 0x10140
+#define CN93_SDP_R_OUT_CONTROL_START 0x10150
+#define CN93_SDP_R_OUT_ENABLE_START 0x10160
+#define CN93_SDP_R_OUT_PKT_CNT_START 0x10180
+#define CN93_SDP_R_OUT_BYTE_CNT_START 0x10190
+
+#define CN93_SDP_R_OUT_CONTROL(ring) \
+ (CN93_SDP_R_OUT_CONTROL_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_ENABLE(ring) \
+ (CN93_SDP_R_OUT_ENABLE_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_SLIST_BADDR(ring) \
+ (CN93_SDP_R_OUT_SLIST_BADDR_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_SLIST_RSIZE(ring) \
+ (CN93_SDP_R_OUT_SLIST_RSIZE_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_SLIST_DBELL(ring) \
+ (CN93_SDP_R_OUT_SLIST_DBELL_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_CNTS(ring) \
+ (CN93_SDP_R_OUT_CNTS_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_INT_LEVELS(ring) \
+ (CN93_SDP_R_OUT_INT_LEVELS_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_PKT_CNT(ring) \
+ (CN93_SDP_R_OUT_PKT_CNT_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_BYTE_CNT(ring) \
+ (CN93_SDP_R_OUT_BYTE_CNT_START + ((ring) * CN93_RING_OFFSET))
+
+/*------------------ R_OUT Masks ----------------*/
+#define CN93_R_OUT_INT_LEVELS_BMODE BIT_ULL(63)
+#define CN93_R_OUT_INT_LEVELS_TIMET (32)
+
+#define CN93_R_OUT_CTL_IDLE BIT_ULL(40)
+#define CN93_R_OUT_CTL_ES_I BIT_ULL(34)
+#define CN93_R_OUT_CTL_NSR_I BIT_ULL(33)
+#define CN93_R_OUT_CTL_ROR_I BIT_ULL(32)
+#define CN93_R_OUT_CTL_ES_D BIT_ULL(30)
+#define CN93_R_OUT_CTL_NSR_D BIT_ULL(29)
+#define CN93_R_OUT_CTL_ROR_D BIT_ULL(28)
+#define CN93_R_OUT_CTL_ES_P BIT_ULL(26)
+#define CN93_R_OUT_CTL_NSR_P BIT_ULL(25)
+#define CN93_R_OUT_CTL_ROR_P BIT_ULL(24)
+#define CN93_R_OUT_CTL_IMODE BIT_ULL(23)
+
+/* ############### Interrupt Moderation Registers ############### */
+#define CN93_SDP_R_IN_INT_MDRT_CTL0_START 0x10280
+#define CN93_SDP_R_IN_INT_MDRT_CTL1_START 0x102A0
+#define CN93_SDP_R_IN_INT_MDRT_DBG_START 0x102C0
+
+#define CN93_SDP_R_OUT_INT_MDRT_CTL0_START 0x10380
+#define CN93_SDP_R_OUT_INT_MDRT_CTL1_START 0x103A0
+#define CN93_SDP_R_OUT_INT_MDRT_DBG_START 0x103C0
+
+#define CN93_SDP_R_IN_INT_MDRT_CTL0(ring) \
+ (CN93_SDP_R_IN_INT_MDRT_CTL0_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_INT_MDRT_CTL1(ring) \
+ (CN93_SDP_R_IN_INT_MDRT_CTL1_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_INT_MDRT_DBG(ring) \
+ (CN93_SDP_R_IN_INT_MDRT_DBG_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_INT_MDRT_CTL0(ring) \
+ (CN93_SDP_R_OUT_INT_MDRT_CTL0_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_INT_MDRT_CTL1(ring) \
+ (CN93_SDP_R_OUT_INT_MDRT_CTL1_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_INT_MDRT_DBG(ring) \
+ (CN93_SDP_R_OUT_INT_MDRT_DBG_START + ((ring) * CN93_RING_OFFSET))
+
+/* ##################### Mail Box Registers ########################## */
+/* INT register for VF. when a MBOX write from PF happed to a VF,
+ * corresponding bit will be set in this register as well as in
+ * PF_VF_INT register.
+ *
+ * This is a RO register, the int can be cleared by writing 1 to PF_VF_INT
+ */
+/* Basically first 3 are from PF to VF. The last one is data from VF to PF */
+#define CN93_SDP_R_MBOX_PF_VF_DATA_START 0x10210
+#define CN93_SDP_R_MBOX_PF_VF_INT_START 0x10220
+#define CN93_SDP_R_MBOX_VF_PF_DATA_START 0x10230
+
+#define CN93_SDP_R_MBOX_PF_VF_DATA(ring) \
+ (CN93_SDP_R_MBOX_PF_VF_DATA_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_MBOX_PF_VF_INT(ring) \
+ (CN93_SDP_R_MBOX_PF_VF_INT_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_MBOX_VF_PF_DATA(ring) \
+ (CN93_SDP_R_MBOX_VF_PF_DATA_START + ((ring) * CN93_RING_OFFSET))
+
+/* ##################### Interrupt Registers ########################## */
+#define CN93_SDP_R_ERR_TYPE_START 0x10400
+
+#define CN93_SDP_R_ERR_TYPE(ring) \
+ (CN93_SDP_R_ERR_TYPE_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_MBOX_ISM_START 0x10500
+#define CN93_SDP_R_OUT_CNTS_ISM_START 0x10510
+#define CN93_SDP_R_IN_CNTS_ISM_START 0x10520
+
+#define CN93_SDP_R_MBOX_ISM(ring) \
+ (CN93_SDP_R_MBOX_ISM_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_OUT_CNTS_ISM(ring) \
+ (CN93_SDP_R_OUT_CNTS_ISM_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_R_IN_CNTS_ISM(ring) \
+ (CN93_SDP_R_IN_CNTS_ISM_START + ((ring) * CN93_RING_OFFSET))
+
+#define CN93_SDP_EPF_MBOX_RINT_START 0x20100
+#define CN93_SDP_EPF_MBOX_RINT_W1S_START 0x20120
+#define CN93_SDP_EPF_MBOX_RINT_ENA_W1C_START 0x20140
+#define CN93_SDP_EPF_MBOX_RINT_ENA_W1S_START 0x20160
+
+#define CN93_SDP_EPF_VFIRE_RINT_START 0x20180
+#define CN93_SDP_EPF_VFIRE_RINT_W1S_START 0x201A0
+#define CN93_SDP_EPF_VFIRE_RINT_ENA_W1C_START 0x201C0
+#define CN93_SDP_EPF_VFIRE_RINT_ENA_W1S_START 0x201E0
+
+#define CN93_SDP_EPF_IRERR_RINT 0x20200
+#define CN93_SDP_EPF_IRERR_RINT_W1S 0x20210
+#define CN93_SDP_EPF_IRERR_RINT_ENA_W1C 0x20220
+#define CN93_SDP_EPF_IRERR_RINT_ENA_W1S 0x20230
+
+#define CN93_SDP_EPF_VFORE_RINT_START 0x20240
+#define CN93_SDP_EPF_VFORE_RINT_W1S_START 0x20260
+#define CN93_SDP_EPF_VFORE_RINT_ENA_W1C_START 0x20280
+#define CN93_SDP_EPF_VFORE_RINT_ENA_W1S_START 0x202A0
+
+#define CN93_SDP_EPF_ORERR_RINT 0x20320
+#define CN93_SDP_EPF_ORERR_RINT_W1S 0x20330
+#define CN93_SDP_EPF_ORERR_RINT_ENA_W1C 0x20340
+#define CN93_SDP_EPF_ORERR_RINT_ENA_W1S 0x20350
+
+#define CN93_SDP_EPF_OEI_RINT 0x20360
+#define CN93_SDP_EPF_OEI_RINT_W1S 0x20370
+#define CN93_SDP_EPF_OEI_RINT_ENA_W1C 0x20380
+#define CN93_SDP_EPF_OEI_RINT_ENA_W1S 0x20390
+
+#define CN93_SDP_EPF_DMA_RINT 0x20400
+#define CN93_SDP_EPF_DMA_RINT_W1S 0x20410
+#define CN93_SDP_EPF_DMA_RINT_ENA_W1C 0x20420
+#define CN93_SDP_EPF_DMA_RINT_ENA_W1S 0x20430
+
+#define CN93_SDP_EPF_DMA_INT_LEVEL_START 0x20440
+#define CN93_SDP_EPF_DMA_CNT_START 0x20460
+#define CN93_SDP_EPF_DMA_TIM_START 0x20480
+
+#define CN93_SDP_EPF_MISC_RINT 0x204A0
+#define CN93_SDP_EPF_MISC_RINT_W1S 0x204B0
+#define CN93_SDP_EPF_MISC_RINT_ENA_W1C 0x204C0
+#define CN93_SDP_EPF_MISC_RINT_ENA_W1S 0x204D0
+
+#define CN93_SDP_EPF_DMA_VF_RINT_START 0x204E0
+#define CN93_SDP_EPF_DMA_VF_RINT_W1S_START 0x20500
+#define CN93_SDP_EPF_DMA_VF_RINT_ENA_W1C_START 0x20520
+#define CN93_SDP_EPF_DMA_VF_RINT_ENA_W1S_START 0x20540
+
+#define CN93_SDP_EPF_PP_VF_RINT_START 0x20560
+#define CN93_SDP_EPF_PP_VF_RINT_W1S_START 0x20580
+#define CN93_SDP_EPF_PP_VF_RINT_ENA_W1C_START 0x205A0
+#define CN93_SDP_EPF_PP_VF_RINT_ENA_W1S_START 0x205C0
+
+#define CN93_SDP_EPF_MBOX_RINT(index) \
+ (CN93_SDP_EPF_MBOX_RINT_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_MBOX_RINT_W1S(index) \
+ (CN93_SDP_EPF_MBOX_RINT_W1S_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_MBOX_RINT_ENA_W1C(index) \
+ (CN93_SDP_EPF_MBOX_RINT_ENA_W1C_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_MBOX_RINT_ENA_W1S(index) \
+ (CN93_SDP_EPF_MBOX_RINT_ENA_W1S_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+
+#define CN93_SDP_EPF_VFIRE_RINT(index) \
+ (CN93_SDP_EPF_VFIRE_RINT_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_VFIRE_RINT_W1S(index) \
+ (CN93_SDP_EPF_VFIRE_RINT_W1S_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_VFIRE_RINT_ENA_W1C(index) \
+ (CN93_SDP_EPF_VFIRE_RINT_ENA_W1C_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_VFIRE_RINT_ENA_W1S(index) \
+ (CN93_SDP_EPF_VFIRE_RINT_ENA_W1S_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+
+#define CN93_SDP_EPF_VFORE_RINT(index) \
+ (CN93_SDP_EPF_VFORE_RINT_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_VFORE_RINT_W1S(index) \
+ (CN93_SDP_EPF_VFORE_RINT_W1S_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_VFORE_RINT_ENA_W1C(index) \
+ (CN93_SDP_EPF_VFORE_RINT_ENA_W1C_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_VFORE_RINT_ENA_W1S(index) \
+ (CN93_SDP_EPF_VFORE_RINT_ENA_W1S_START + ((index) * CN93_BIT_ARRAY_OFFSET))
+
+#define CN93_SDP_EPF_DMA_VF_RINT(index) \
+ (CN93_SDP_EPF_DMA_VF_RINT_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_DMA_VF_RINT_W1S(index) \
+ (CN93_SDP_EPF_DMA_VF_RINT_W1S_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_DMA_VF_RINT_ENA_W1C(index) \
+ (CN93_SDP_EPF_DMA_VF_RINT_ENA_W1C_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_DMA_VF_RINT_ENA_W1S(index) \
+ (CN93_SDP_EPF_DMA_VF_RINT_ENA_W1S_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+
+#define CN93_SDP_EPF_PP_VF_RINT(index) \
+ (CN93_SDP_EPF_PP_VF_RINT_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_PP_VF_RINT_W1S(index) \
+ (CN93_SDP_EPF_PP_VF_RINT_W1S_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_PP_VF_RINT_ENA_W1C(index) \
+ (CN93_SDP_EPF_PP_VF_RINT_ENA_W1C_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+#define CN93_SDP_EPF_PP_VF_RINT_ENA_W1S(index) \
+ (CN93_SDP_EPF_PP_VF_RINT_ENA_W1S_START + ((index) + CN93_BIT_ARRAY_OFFSET))
+
+/*------------------ Interrupt Masks ----------------*/
+#define CN93_INTR_R_SEND_ISM BIT_ULL(63)
+#define CN93_INTR_R_OUT_INT BIT_ULL(62)
+#define CN93_INTR_R_IN_INT BIT_ULL(61)
+#define CN93_INTR_R_MBOX_INT BIT_ULL(60)
+#define CN93_INTR_R_RESEND BIT_ULL(59)
+#define CN93_INTR_R_CLR_TIM BIT_ULL(58)
+
+/* ####################### Ring Mapping Registers ################################## */
+#define CN93_SDP_EPVF_RING_START 0x26000
+#define CN93_SDP_IN_RING_TB_MAP_START 0x28000
+#define CN93_SDP_IN_RATE_LIMIT_START 0x2A000
+#define CN93_SDP_MAC_PF_RING_CTL_START 0x2C000
+
+#define CN93_SDP_EPVF_RING(ring) \
+ (CN93_SDP_EPVF_RING_START + ((ring) * CN93_EPVF_RING_OFFSET))
+#define CN93_SDP_IN_RING_TB_MAP(ring) \
+ (CN93_SDP_N_RING_TB_MAP_START + ((ring) * CN93_EPVF_RING_OFFSET))
+#define CN93_SDP_IN_RATE_LIMIT(ring) \
+ (CN93_SDP_IN_RATE_LIMIT_START + ((ring) * CN93_EPVF_RING_OFFSET))
+#define CN93_SDP_MAC_PF_RING_CTL(mac) \
+ (CN93_SDP_MAC_PF_RING_CTL_START + ((mac) * CN93_MAC_OFFSET))
+
+#define CN93_SDP_MAC_PF_RING_CTL_NPFS(val) ((val) & 0xF)
+#define CN93_SDP_MAC_PF_RING_CTL_SRN(val) (((val) >> 8) & 0xFF)
+#define CN93_SDP_MAC_PF_RING_CTL_RPPF(val) (((val) >> 16) & 0x3F)
+
+/* Number of non-queue interrupts in CN93xx */
+#define CN93_NUM_NON_IOQ_INTR 16
+#endif /* _OCTEP_REGS_CN9K_PF_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c
new file mode 100644
index 000000000000..4fa67f305cc8
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+
+#include "octep_config.h"
+#include "octep_main.h"
+
+/**
+ * octep_setup_oqs() - setup resources for all Rx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+int octep_setup_oqs(struct octep_device *oct)
+{
+ return -1;
+}
+
+/**
+ * octep_oq_dbell_init() - Initialize Rx queue doorbell.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Write number of descriptors to Rx queue doorbell register.
+ */
+void octep_oq_dbell_init(struct octep_device *oct)
+{
+}
+
+/**
+ * octep_free_oqs() - Free resources of all Rx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+void octep_free_oqs(struct octep_device *oct)
+{
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h
new file mode 100644
index 000000000000..782a24f27f3e
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_rx.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_RX_H_
+#define _OCTEP_RX_H_
+
+/* struct octep_oq_desc_hw - Octeon Hardware OQ descriptor format.
+ *
+ * The descriptor ring is made of descriptors which have 2 64-bit values:
+ *
+ * @buffer_ptr: DMA address of the skb->data
+ * @info_ptr: DMA address of host memory, used to update pkt count by hw.
+ * This is currently unused to save pci writes.
+ */
+struct octep_oq_desc_hw {
+ dma_addr_t buffer_ptr;
+ u64 info_ptr;
+};
+
+#define OCTEP_OQ_DESC_SIZE (sizeof(struct octep_oq_desc_hw))
+
+#define OCTEP_CSUM_L4_VERIFIED 0x1
+#define OCTEP_CSUM_IP_VERIFIED 0x2
+#define OCTEP_CSUM_VERIFIED (OCTEP_CSUM_L4_VERIFIED | OCTEP_CSUM_IP_VERIFIED)
+
+/* Extended Response Header in packet data received from Hardware.
+ * Includes metadata like checksum status.
+ * this is valid only if hardware/firmware published support for this.
+ * This is at offset 0 of packet data (skb->data).
+ */
+struct octep_oq_resp_hw_ext {
+ /* Reserved. */
+ u64 reserved:62;
+
+ /* checksum verified. */
+ u64 csum_verified:2;
+};
+
+#define OCTEP_OQ_RESP_HW_EXT_SIZE (sizeof(struct octep_oq_resp_hw_ext))
+
+/* Length of Rx packet DMA'ed by Octeon to Host.
+ * this is in bigendian; so need to be converted to cpu endian.
+ * Octeon writes this at the beginning of Rx buffer (skb->data).
+ */
+struct octep_oq_resp_hw {
+ /* The Length of the packet. */
+ __be64 length;
+};
+
+#define OCTEP_OQ_RESP_HW_SIZE (sizeof(struct octep_oq_resp_hw))
+
+/* Pointer to data buffer.
+ * Driver keeps a pointer to the data buffer that it made available to
+ * the Octeon device. Since the descriptor ring keeps physical (bus)
+ * addresses, this field is required for the driver to keep track of
+ * the virtual address pointers. The fields are operated by
+ * OS-dependent routines.
+ */
+struct octep_rx_buffer {
+ struct page *page;
+
+ /* length from rx hardware descriptor after converting to cpu endian */
+ u64 len;
+};
+
+#define OCTEP_OQ_RECVBUF_SIZE (sizeof(struct octep_rx_buffer))
+
+/* Output Queue statistics. Each output queue has four stats fields. */
+struct octep_oq_stats {
+ /* Number of packets received from the Device. */
+ u64 packets;
+
+ /* Number of bytes received from the Device. */
+ u64 bytes;
+
+ /* Number of times failed to allocate buffers. */
+ u64 alloc_failures;
+};
+
+#define OCTEP_OQ_STATS_SIZE (sizeof(struct octep_oq_stats))
+
+/* Hardware interface Rx statistics */
+struct octep_iface_rx_stats {
+ /* Received packets */
+ u64 pkts;
+
+ /* Octets of received packets */
+ u64 octets;
+
+ /* Received PAUSE and Control packets */
+ u64 pause_pkts;
+
+ /* Received PAUSE and Control octets */
+ u64 pause_octets;
+
+ /* Filtered DMAC0 packets */
+ u64 dmac0_pkts;
+
+ /* Filtered DMAC0 octets */
+ u64 dmac0_octets;
+
+ /* Packets dropped due to RX FIFO full */
+ u64 dropped_pkts_fifo_full;
+
+ /* Octets dropped due to RX FIFO full */
+ u64 dropped_octets_fifo_full;
+
+ /* Error packets */
+ u64 err_pkts;
+
+ /* Filtered DMAC1 packets */
+ u64 dmac1_pkts;
+
+ /* Filtered DMAC1 octets */
+ u64 dmac1_octets;
+
+ /* NCSI-bound packets dropped */
+ u64 ncsi_dropped_pkts;
+
+ /* NCSI-bound octets dropped */
+ u64 ncsi_dropped_octets;
+
+ /* Multicast packets received. */
+ u64 mcast_pkts;
+
+ /* Broadcast packets received. */
+ u64 bcast_pkts;
+
+};
+
+/* The Descriptor Ring Output Queue structure.
+ * This structure has all the information required to implement a
+ * Octeon OQ.
+ */
+struct octep_oq {
+ u32 q_no;
+
+ struct octep_device *octep_dev;
+ struct net_device *netdev;
+ struct device *dev;
+
+ struct napi_struct *napi;
+
+ /* The receive buffer list. This list has the virtual addresses
+ * of the buffers.
+ */
+ struct octep_rx_buffer *buff_info;
+
+ /* Pointer to the mapped packet credit register.
+ * Host writes number of info/buffer ptrs available to this register
+ */
+ u8 __iomem *pkts_credit_reg;
+
+ /* Pointer to the mapped packet sent register.
+ * Octeon writes the number of packets DMA'ed to host memory
+ * in this register.
+ */
+ u8 __iomem *pkts_sent_reg;
+
+ /* Statistics for this OQ. */
+ struct octep_oq_stats stats;
+
+ /* Packets pending to be processed */
+ u32 pkts_pending;
+ u32 last_pkt_count;
+
+ /* Index in the ring where the driver should read the next packet */
+ u32 host_read_idx;
+
+ /* Number of descriptors in this ring. */
+ u32 max_count;
+ u32 ring_size_mask;
+
+ /* The number of descriptors pending refill. */
+ u32 refill_count;
+
+ /* Index in the ring where the driver will refill the
+ * descriptor's buffer
+ */
+ u32 host_refill_idx;
+ u32 refill_threshold;
+
+ /* The size of each buffer pointed by the buffer pointer. */
+ u32 buffer_size;
+ u32 max_single_buffer_size;
+
+ /* The 8B aligned descriptor ring starts at this address. */
+ struct octep_oq_desc_hw *desc_ring;
+
+ /* DMA mapped address of the OQ descriptor ring. */
+ dma_addr_t desc_ring_dma;
+};
+
+#define OCTEP_OQ_SIZE (sizeof(struct octep_oq))
+#endif /* _OCTEP_RX_H_ */
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c
new file mode 100644
index 000000000000..f0e1cc142b2e
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+
+#include "octep_config.h"
+#include "octep_main.h"
+
+/**
+ * octep_clean_iqs() - Clean Tx queues to shutdown the device.
+ *
+ * @oct: Octeon device private data structure.
+ *
+ * Free the buffers in Tx queue descriptors pending completion and
+ * reset queue indices
+ */
+void octep_clean_iqs(struct octep_device *oct)
+{
+}
+
+/**
+ * octep_setup_iqs() - setup resources for all Tx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+int octep_setup_iqs(struct octep_device *oct)
+{
+ return -1;
+}
+
+/**
+ * octep_free_iqs() - Free resources of all Tx queues.
+ *
+ * @oct: Octeon device private data structure.
+ */
+void octep_free_iqs(struct octep_device *oct)
+{
+}
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h
new file mode 100644
index 000000000000..2ef57980eb47
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_tx.h
@@ -0,0 +1,284 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell Octeon EP (EndPoint) Ethernet Driver
+ *
+ * Copyright (C) 2020 Marvell.
+ *
+ */
+
+#ifndef _OCTEP_TX_H_
+#define _OCTEP_TX_H_
+
+#define IQ_SEND_OK 0
+#define IQ_SEND_STOP 1
+#define IQ_SEND_FAILED -1
+
+#define TX_BUFTYPE_NONE 0
+#define TX_BUFTYPE_NET 1
+#define TX_BUFTYPE_NET_SG 2
+#define NUM_TX_BUFTYPES 3
+
+/* Hardware format for Scatter/Gather list */
+struct octep_tx_sglist_desc {
+ u16 len[4];
+ dma_addr_t dma_ptr[4];
+};
+
+/* Each Scatter/Gather entry sent to hardwar hold four pointers.
+ * So, number of entries required is (MAX_SKB_FRAGS + 1)/4, where '+1'
+ * is for main skb which also goes as a gather buffer to Octeon hardware.
+ * To allocate sufficient SGLIST entries for a packet with max fragments,
+ * align by adding 3 before calcuating max SGLIST entries per packet.
+ */
+#define OCTEP_SGLIST_ENTRIES_PER_PKT ((MAX_SKB_FRAGS + 1 + 3) / 4)
+#define OCTEP_SGLIST_SIZE_PER_PKT \
+ (OCTEP_SGLIST_ENTRIES_PER_PKT * sizeof(struct octep_tx_sglist_desc))
+
+struct octep_tx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct octep_tx_sglist_desc *sglist;
+ dma_addr_t sglist_dma;
+ u8 gather;
+};
+
+#define OCTEP_IQ_TXBUFF_INFO_SIZE (sizeof(struct octep_tx_buffer))
+
+/* Hardware interface Tx statistics */
+struct octep_iface_tx_stats {
+ /* Packets dropped due to excessive collisions */
+ u64 xscol;
+
+ /* Packets dropped due to excessive deferral */
+ u64 xsdef;
+
+ /* Packets sent that experienced multiple collisions before successful
+ * transmission
+ */
+ u64 mcol;
+
+ /* Packets sent that experienced a single collision before successful
+ * transmission
+ */
+ u64 scol;
+
+ /* Total octets sent on the interface */
+ u64 octs;
+
+ /* Total frames sent on the interface */
+ u64 pkts;
+
+ /* Packets sent with an octet count < 64 */
+ u64 hist_lt64;
+
+ /* Packets sent with an octet count == 64 */
+ u64 hist_eq64;
+
+ /* Packets sent with an octet count of 65–127 */
+ u64 hist_65to127;
+
+ /* Packets sent with an octet count of 128–255 */
+ u64 hist_128to255;
+
+ /* Packets sent with an octet count of 256–511 */
+ u64 hist_256to511;
+
+ /* Packets sent with an octet count of 512–1023 */
+ u64 hist_512to1023;
+
+ /* Packets sent with an octet count of 1024-1518 */
+ u64 hist_1024to1518;
+
+ /* Packets sent with an octet count of > 1518 */
+ u64 hist_gt1518;
+
+ /* Packets sent to a broadcast DMAC */
+ u64 bcst;
+
+ /* Packets sent to the multicast DMAC */
+ u64 mcst;
+
+ /* Packets sent that experienced a transmit underflow and were
+ * truncated
+ */
+ u64 undflw;
+
+ /* Control/PAUSE packets sent */
+ u64 ctl;
+};
+
+/* Input Queue statistics. Each input queue has four stats fields. */
+struct octep_iq_stats {
+ /* Instructions posted to this queue. */
+ u64 instr_posted;
+
+ /* Instructions copied by hardware for processing. */
+ u64 instr_completed;
+
+ /* Instructions that could not be processed. */
+ u64 instr_dropped;
+
+ /* Bytes sent through this queue. */
+ u64 bytes_sent;
+
+ /* Gather entries sent through this queue. */
+ u64 sgentry_sent;
+
+ /* Number of transmit failures due to TX_BUSY */
+ u64 tx_busy;
+
+ /* Number of times the queue is restarted */
+ u64 restart_cnt;
+};
+
+/* The instruction (input) queue.
+ * The input queue is used to post raw (instruction) mode data or packet
+ * data to Octeon device from the host. Each input queue (up to 4) for
+ * a Octeon device has one such structure to represent it.
+ */
+struct octep_iq {
+ u32 q_no;
+
+ struct octep_device *octep_dev;
+ struct net_device *netdev;
+ struct device *dev;
+ struct netdev_queue *netdev_q;
+
+ /* Index in input ring where driver should write the next packet */
+ u16 host_write_index;
+
+ /* Index in input ring where Octeon is expected to read next packet */
+ u16 octep_read_index;
+
+ /* This index aids in finding the window in the queue where Octeon
+ * has read the commands.
+ */
+ u16 flush_index;
+
+ /* Statistics for this input queue. */
+ struct octep_iq_stats stats;
+
+ /* This field keeps track of the instructions pending in this queue. */
+ atomic_t instr_pending;
+
+ /* Pointer to the Virtual Base addr of the input ring. */
+ struct octep_tx_desc_hw *desc_ring;
+
+ /* DMA mapped base address of the input descriptor ring. */
+ dma_addr_t desc_ring_dma;
+
+ /* Info of Tx buffers pending completion. */
+ struct octep_tx_buffer *buff_info;
+
+ /* Base pointer to Scatter/Gather lists for all ring descriptors. */
+ struct octep_tx_sglist_desc *sglist;
+
+ /* DMA mapped addr of Scatter Gather Lists */
+ dma_addr_t sglist_dma;
+
+ /* Octeon doorbell register for the ring. */
+ u8 __iomem *doorbell_reg;
+
+ /* Octeon instruction count register for this ring. */
+ u8 __iomem *inst_cnt_reg;
+
+ /* interrupt level register for this ring */
+ u8 __iomem *intr_lvl_reg;
+
+ /* Maximum no. of instructions in this queue. */
+ u32 max_count;
+ u32 ring_size_mask;
+
+ u32 pkt_in_done;
+ u32 pkts_processed;
+
+ u32 status;
+
+ /* Number of instructions pending to be posted to Octeon. */
+ u32 fill_cnt;
+
+ /* The max. number of instructions that can be held pending by the
+ * driver before ringing doorbell.
+ */
+ u32 fill_threshold;
+};
+
+/* Hardware Tx Instruction Header */
+struct octep_instr_hdr {
+ /* Data Len */
+ u64 tlen:16;
+
+ /* Reserved */
+ u64 rsvd:20;
+
+ /* PKIND for SDP */
+ u64 pkind:6;
+
+ /* Front Data size */
+ u64 fsz:6;
+
+ /* No. of entries in gather list */
+ u64 gsz:14;
+
+ /* Gather indicator 1=gather*/
+ u64 gather:1;
+
+ /* Reserved3 */
+ u64 reserved3:1;
+};
+
+/* Hardware Tx completion response header */
+struct octep_instr_resp_hdr {
+ /* Request ID */
+ u64 rid:16;
+
+ /* PCIe port to use for response */
+ u64 pcie_port:3;
+
+ /* Scatter indicator 1=scatter */
+ u64 scatter:1;
+
+ /* Size of Expected result OR no. of entries in scatter list */
+ u64 rlenssz:14;
+
+ /* Desired destination port for result */
+ u64 dport:6;
+
+ /* Opcode Specific parameters */
+ u64 param:8;
+
+ /* Opcode for the return packet */
+ u64 opcode:16;
+};
+
+/* 64-byte Tx instruction format.
+ * Format of instruction for a 64-byte mode input queue.
+ *
+ * only first 16-bytes (dptr and ih) are mandatory; rest are optional
+ * and filled by the driver based on firmware/hardware capabilities.
+ * These optional headers together called Front Data and its size is
+ * described by ih->fsz.
+ */
+struct octep_tx_desc_hw {
+ /* Pointer where the input data is available. */
+ u64 dptr;
+
+ /* Instruction Header. */
+ union {
+ struct octep_instr_hdr ih;
+ u64 ih64;
+ };
+
+ /* Pointer where the response for a RAW mode packet will be written
+ * by Octeon.
+ */
+ u64 rptr;
+
+ /* Input Instruction Response Header. */
+ struct octep_instr_resp_hdr irh;
+
+ /* Additional headers available in a 64-byte instruction. */
+ u64 exhdr[4];
+};
+
+#define OCTEP_IQ_DESC_SIZE (sizeof(struct octep_tx_desc_hw))
+#endif /* _OCTEP_TX_H_ */
--
2.17.1
Powered by blists - more mailing lists