linux-kernel - Re: [PATCH v7 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound card

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 13 Apr 2022 14:23:53 -0700
From:   Matthias Kaehlcke <mka@...omium.org>
To:     Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Cc:     agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_rohkumar@...cinc.com,
        srinivas.kandagatla@...aro.org, dianders@...omium.org,
        swboyd@...omium.org, judyhsiao@...omium.org,
        Venkata Prasad Potturu <quic_potturu@...cinc.com>
Subject: Re: [PATCH v7 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound
 card

On Wed, Apr 13, 2022 at 08:51:17PM +0530, Srinivasa Rao Mandadapu wrote:
> Add dt nodes for sound card support, which is using WCD938x headset
> playback, capture, I2S speaker playback and DMICs via VA macro.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-crd.dts  | 23 ++++++++
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
>  2 files changed, 116 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> index b944366..1e16854 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts

You need to refresh your tree, this file has been renamed to
sc7280-crd-r3.dts. That DT is for the CRD <= 2.x, newer versions
use sc7280-herobrine-crd.dts.

> @@ -90,6 +90,29 @@ ap_ts_pen_1v8: &i2c13 {
>  	us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
>  };
>  
> +&sound {
> +	audio-routing =
> +		"IN1_HPHL", "HPHL_OUT",
> +		"IN2_HPHR", "HPHR_OUT",
> +		"AMIC1", "MIC BIAS1",
> +		"AMIC2", "MIC BIAS2",
> +		"VA DMIC0", "MIC BIAS1",
> +		"VA DMIC1", "MIC BIAS1",
> +		"VA DMIC2", "MIC BIAS3",
> +		"VA DMIC3", "MIC BIAS3",
> +		"TX SWR_ADC0", "ADC1_OUTPUT",
> +		"TX SWR_ADC1", "ADC2_OUTPUT",
> +		"TX SWR_ADC2", "ADC3_OUTPUT",
> +		"TX SWR_DMIC0", "DMIC1_OUTPUT",
> +		"TX SWR_DMIC1", "DMIC2_OUTPUT",
> +		"TX SWR_DMIC2", "DMIC3_OUTPUT",
> +		"TX SWR_DMIC3", "DMIC4_OUTPUT",
> +		"TX SWR_DMIC4", "DMIC5_OUTPUT",
> +		"TX SWR_DMIC5", "DMIC6_OUTPUT",
> +		"TX SWR_DMIC6", "DMIC7_OUTPUT",
> +		"TX SWR_DMIC7", "DMIC8_OUTPUT";
> +};
> +
>  &tlmm {
>  	tp_int_odl: tp-int-odl {
>  		pins = "gpio7";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index cf62d06..a7c884a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -84,6 +84,99 @@
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&nvme_pwren>;
>  	};
> +
> +	sound: sound {
> +		compatible = "google,sc7280-herobrine";
> +		model = "sc7280-wcd938x-max98360a-1mic";
> +
> +		audio-routing =
> +			"IN1_HPHL", "HPHL_OUT",
> +			"IN2_HPHR", "HPHR_OUT",
> +			"AMIC1", "MIC BIAS1",
> +			"AMIC2", "MIC BIAS2",
> +			"VA DMIC0", "MIC BIAS3",
> +			"VA DMIC1", "MIC BIAS3",
> +			"VA DMIC2", "MIC BIAS1",
> +			"VA DMIC3", "MIC BIAS1",
> +			"TX SWR_ADC0", "ADC1_OUTPUT",
> +			"TX SWR_ADC1", "ADC2_OUTPUT",
> +			"TX SWR_ADC2", "ADC3_OUTPUT",
> +			"TX SWR_DMIC0", "DMIC1_OUTPUT",
> +			"TX SWR_DMIC1", "DMIC2_OUTPUT",
> +			"TX SWR_DMIC2", "DMIC3_OUTPUT",
> +			"TX SWR_DMIC3", "DMIC4_OUTPUT",
> +			"TX SWR_DMIC4", "DMIC5_OUTPUT",
> +			"TX SWR_DMIC5", "DMIC6_OUTPUT",
> +			"TX SWR_DMIC6", "DMIC7_OUTPUT",
> +			"TX SWR_DMIC7", "DMIC8_OUTPUT";
> +
> +		qcom,msm-mbhc-hphl-swh = <1>;
> +		qcom,msm-mbhc-gnd-swh = <1>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		#sound-dai-cells = <0>;
> +
> +		dai-link@1 {
> +			link-name = "MAX98360A";
> +			reg = <MI2S_SECONDARY>;

Dumb question: is this value actually used? A quick glance through
qcom_snd_parse_of() suggests it isn't. And the CPU DAI id is already
specified in the 'sound-dai' property below.

In a quick test I replaced the corresponding 'reg' values in
sc7180-trogdor.dtsi with 'random' values and audio playback on
my coachz (sc7180-trogdor-coachz-r3.dts) still works ...

> +			cpu {
> +				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> +			};
> +
> +			codec {
> +				sound-dai = <&max98360a>;
> +			};
> +		};
> +
> +		dai-link@5 {
> +			link-name = "DisplayPort";
> +			reg = <LPASS_DP_RX>;

nit: add an empty line (in all links) to separate the properties from the node

> +			cpu {
> +				sound-dai = <&lpass_cpu LPASS_DP_RX>;
> +			};
> +
> +			codec {
> +				sound-dai = <&mdss_dp>;
> +			};
> +		};
> +
> +		dai-link@6 {
> +			link-name = "WCD9385 Playback";
> +			reg = <LPASS_CDC_DMA_RX0>;
> +			cpu {
> +				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
> +			};
> +
> +			codec {
> +				sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
> +			};
> +		};
> +
> +		dai-link@19 {
> +			link-name = "WCD9385 Capture";
> +			reg = <LPASS_CDC_DMA_TX3>;
> +			cpu {
> +				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
> +			};
> +
> +			codec {
> +				sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
> +			};
> +		};
> +
> +		dai-link@25 {
> +			link-name = "DMIC";
> +			reg = <LPASS_CDC_DMA_VA_TX0>;
> +			cpu {
> +				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
> +			};
> +
> +			codec {
> +				sound-dai = <&lpass_va_macro 0>;
> +			};
> +		};
> +	};
>  };
>  
>  &apps_rsc {
> -- 
> 2.7.4
>