linux-kernel - [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 14 Apr 2022 11:09:33 +0530
From:   Md Sadre Alam <quic_mdalam@...cinc.com>
To:     mani@...nel.org, miquel.raynal@...tlin.com, richard@....at,
        vigneshr@...com, linux-mtd@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     konrad.dybcio@...ainline.org, quic_srichara@...cinc.com,
        quic_mdalam@...cinc.com
Subject: [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic

This patch fixes a memory corruption that occurred in the
nand_scan() path for Hynix nand device.

On boot, for Hynix nand device will panic at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual
  address 00000070
| [00000070] *pgd=00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
  #38
| Hardware name: Generic DT based system
| PC is at nandc_set_reg+0x8/0x1c
| LR is at qcom_nandc_command+0x20c/0x5d0
| pc : [<c088b74c>]    lr : [<c088d9c8>]    psr: 00000113
| sp : c14adc50  ip : c14ee208  fp : c0cc970c
| r10: 000000a3  r9 : 00000000  r8 : 00000040
| r7 : c16f6a00  r6 : 00000090  r5 : 00000004  r4 :c14ee040
| r3 : 00000000  r2 : 0000000b  r1 : 00000000  r0 :c14ee040
| Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment none
| Control: 10c5387d  Table: 8020406a  DAC: 00000051
| Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
  64 size 2048
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
| qcom_nandc_command from nand_readid_op+0x198/0x1e8
| nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
| hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
| hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
| nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
| qcom_nandc_probe from platform_probe+0x58/0xac

The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4.This causes the
sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_command() to memset much more than what was initially
allocated by alloc_bam_transaction().

This patch will update nandc->max_cwperpage 1 to 4 after nand_scan()
returns, and remove updating nandc->max_cwperpage from
qcom_nand_attach_chip call back.

Signed-off-by: Md Sadre Alam <quic_mdalam@...cinc.com>
Signed-off-by: Sricharan R <quic_srichara@...cinc.com>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 1a77542..aa3ec45 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2652,9 +2652,6 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
 
 	mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
 
-	nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
-				     cwperpage);
-
 	/*
 	 * DATA_UD_BYTES varies based on whether the read/write command protects
 	 * spare data with ECC too. We protect spare data by default, so we set
@@ -2909,7 +2906,7 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	struct nand_chip *chip = &host->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct device *dev = nandc->dev;
-	int ret;
+	int ret, cwperpage;
 
 	ret = of_property_read_u32(dn, "reg", &host->cs);
 	if (ret) {
@@ -2955,6 +2952,9 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 	if (ret)
 		return ret;
 
+	cwperpage = mtd->writesize / NANDC_STEP_SIZE;
+	nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
+				     cwperpage);
 	if (nandc->props->is_bam) {
 		free_bam_transaction(nandc);
 		nandc->bam_txn = alloc_bam_transaction(nandc);
-- 
2.7.4