| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220415055916.28350-3-rex-bc.chen@mediatek.com>
Date: Fri, 15 Apr 2022 13:59:03 +0800
From: Rex-BC Chen <rex-bc.chen@...iatek.com>
To: <rafael@...nel.org>, <viresh.kumar@...aro.org>,
<robh+dt@...nel.org>, <krzk+dt@...nel.org>,
<matthias.bgg@...il.com>
CC: <jia-wei.chang@...iatek.com>, <roger.lu@...iatek.com>,
<hsinyi@...gle.com>, <khilman@...libre.com>,
<angelogioacchino.delregno@...labora.com>,
<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
Rex-BC Chen <rex-bc.chen@...iatek.com>
Subject: [PATCH V3 02/15] cpufreq: mediatek: Use device print to show logs
- Replace pr_* with dev_* to show logs.
- Remove usage of __func__.
Signed-off-by: Rex-BC Chen <rex-bc.chen@...iatek.com>
---
drivers/cpufreq/mediatek-cpufreq.c | 54 ++++++++++++++++--------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index dc4a87e68940..e040f3574af9 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -65,7 +65,8 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
old_vproc = regulator_get_voltage(proc_reg);
if (old_vproc < 0) {
- pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc);
+ dev_err(info->cpu_dev,
+ "invalid Vproc value: %d\n", old_vproc);
return old_vproc;
}
/* Vsram should not exceed the maximum allowed voltage of SoC. */
@@ -81,14 +82,14 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
do {
old_vsram = regulator_get_voltage(sram_reg);
if (old_vsram < 0) {
- pr_err("%s: invalid Vsram value: %d\n",
- __func__, old_vsram);
+ dev_err(info->cpu_dev,
+ "invalid Vsram value: %d\n", old_vsram);
return old_vsram;
}
old_vproc = regulator_get_voltage(proc_reg);
if (old_vproc < 0) {
- pr_err("%s: invalid Vproc value: %d\n",
- __func__, old_vproc);
+ dev_err(info->cpu_dev,
+ "invalid Vproc value: %d\n", old_vproc);
return old_vproc;
}
@@ -136,14 +137,14 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
do {
old_vproc = regulator_get_voltage(proc_reg);
if (old_vproc < 0) {
- pr_err("%s: invalid Vproc value: %d\n",
- __func__, old_vproc);
+ dev_err(info->cpu_dev,
+ "invalid Vproc value: %d\n", old_vproc);
return old_vproc;
}
old_vsram = regulator_get_voltage(sram_reg);
if (old_vsram < 0) {
- pr_err("%s: invalid Vsram value: %d\n",
- __func__, old_vsram);
+ dev_err(info->cpu_dev,
+ "invalid Vsram value: %d\n", old_vsram);
return old_vsram;
}
@@ -214,7 +215,7 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
old_freq_hz = clk_get_rate(cpu_clk);
old_vproc = regulator_get_voltage(info->proc_reg);
if (old_vproc < 0) {
- pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc);
+ dev_err(cpu_dev, "invalid Vproc value: %d\n", old_vproc);
return old_vproc;
}
@@ -222,8 +223,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
if (IS_ERR(opp)) {
- pr_err("cpu%d: failed to find OPP for %ld\n",
- policy->cpu, freq_hz);
+ dev_err(cpu_dev, "cpu%d: failed to find OPP for %ld\n",
+ policy->cpu, freq_hz);
return PTR_ERR(opp);
}
vproc = dev_pm_opp_get_voltage(opp);
@@ -237,8 +238,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
if (old_vproc < target_vproc) {
ret = mtk_cpufreq_set_voltage(info, target_vproc);
if (ret) {
- pr_err("cpu%d: failed to scale up voltage!\n",
- policy->cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to scale up voltage!\n", policy->cpu);
mtk_cpufreq_set_voltage(info, old_vproc);
return ret;
}
@@ -247,8 +248,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
/* Reparent the CPU clock to intermediate clock. */
ret = clk_set_parent(cpu_clk, info->inter_clk);
if (ret) {
- pr_err("cpu%d: failed to re-parent cpu clock!\n",
- policy->cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to re-parent cpu clock!\n", policy->cpu);
mtk_cpufreq_set_voltage(info, old_vproc);
WARN_ON(1);
return ret;
@@ -257,8 +258,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
/* Set the original PLL to target rate. */
ret = clk_set_rate(armpll, freq_hz);
if (ret) {
- pr_err("cpu%d: failed to scale cpu clock rate!\n",
- policy->cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to scale cpu clock rate!\n", policy->cpu);
clk_set_parent(cpu_clk, armpll);
mtk_cpufreq_set_voltage(info, old_vproc);
return ret;
@@ -267,8 +268,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
/* Set parent of CPU clock back to the original PLL. */
ret = clk_set_parent(cpu_clk, armpll);
if (ret) {
- pr_err("cpu%d: failed to re-parent cpu clock!\n",
- policy->cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to re-parent cpu clock!\n", policy->cpu);
mtk_cpufreq_set_voltage(info, inter_vproc);
WARN_ON(1);
return ret;
@@ -281,8 +282,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
if (vproc < inter_vproc || vproc < old_vproc) {
ret = mtk_cpufreq_set_voltage(info, vproc);
if (ret) {
- pr_err("cpu%d: failed to scale down voltage!\n",
- policy->cpu);
+ dev_err(cpu_dev,
+ "cpu%d: failed to scale down voltage!\n", policy->cpu);
clk_set_parent(cpu_clk, info->inter_clk);
clk_set_rate(armpll, old_freq_hz);
clk_set_parent(cpu_clk, armpll);
@@ -448,15 +449,16 @@ static int mtk_cpufreq_init(struct cpufreq_policy *policy)
info = mtk_cpu_dvfs_info_lookup(policy->cpu);
if (!info) {
- pr_err("dvfs info for cpu%d is not initialized.\n",
- policy->cpu);
+ dev_err(info->cpu_dev,
+ "dvfs info for cpu%d is not initialized.\n", policy->cpu);
return -EINVAL;
}
ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table);
if (ret) {
- pr_err("failed to init cpufreq table for cpu%d: %d\n",
- policy->cpu, ret);
+ dev_err(info->cpu_dev,
+ "failed to init cpufreq table for cpu%d: %d\n",
+ policy->cpu, ret);
return ret;
}
--
2.18.0
Powered by blists - more mailing lists