Date:   Fri, 15 Apr 2022 18:50:19 +0800
From:   zhenwei pi <pizhenwei@...edance.com>
To:     "Michael S. Tsirkin" <mst@...hat.com>
Cc:     arei.gonglei@...wei.com, jasowang@...hat.com,
        herbert@...dor.apana.org.au, linux-kernel@...r.kernel.org,
        virtualization@...ts.linux-foundation.org,
        linux-crypto@...r.kernel.org, helei.sig11@...edance.com,
        davem@...emloft.net
Subject: Re: Re: [PATCH 1/4] virtio-crypto: wait ctrl queue instead of busy
 polling

On 4/15/22 16:41, Michael S. Tsirkin wrote:
>> diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c
>> index f3ec9420215e..bf7c1aa4be37 100644
>> --- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c
>> +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c
>> @@ -102,107 +102,100 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher
>>   {
>>   	struct scatterlist outhdr_sg, key_sg, inhdr_sg, *sgs[3];
>>   	struct virtio_crypto *vcrypto = ctx->vcrypto;
>> +	struct virtio_crypto_ctrl_request *vc_ctrl_req = NULL;
> 
> this is initialized down the road, I think you can skip = NULL here.
> 
OK.
>>   	uint8_t *pkey;
>> -	unsigned int inlen;
>> -	int err;
>> +	int err = -ENOMEM;
> 
> I would assign this in the single case where this value is used.
> 
OK
>>   	unsigned int num_out = 0, num_in = 0;
>> +	int node = dev_to_node(&vcrypto->vdev->dev);
>>   
> are you sure it is
> better to allocate close to device and not to current node
> which is the default?
>
Also with this part:
  /* Internal representation of a data virtqueue */
@@ -65,11 +66,6 @@ struct virtio_crypto {
  	/* Maximum size of per request */
  	u64 max_size;

-	/* Control VQ buffers: protected by the ctrl_lock */
-	struct virtio_crypto_op_ctrl_req ctrl;
-	struct virtio_crypto_session_input input;
-	struct virtio_crypto_inhdr ctrl_status;
-
  	unsigned long status;
  	atomic_t ref_count;

Orignally virtio crypto driver allocates ctrl&input&ctrl_status 
per-device, and protects this with ctrl_lock. This is the reason why the 
control queue reaches the bottleneck of performance. I'll append this in 
the next version in commit message.

Instead of the single request buffer, declare struct 
virtio_crypto_ctrl_request {
         struct virtio_crypto_op_ctrl_req ctrl;
         struct virtio_crypto_session_input input;
         struct virtio_crypto_inhdr ctrl_status;
	... }

The motivation of this change is to allocate buffer from the same node 
with device during control queue operations.

> 
>>   	pkey = kmemdup(key, keylen, GFP_ATOMIC);
>>   	if (!pkey)
>>   		return -ENOMEM;
>>   
>> -	spin_lock(&vcrypto->ctrl_lock);
>> -	memcpy(&vcrypto->ctrl.header, header, sizeof(vcrypto->ctrl.header));
>> -	memcpy(&vcrypto->ctrl.u, para, sizeof(vcrypto->ctrl.u));
>> -	vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR);
>> +	vc_ctrl_req = kzalloc_node(sizeof(*vc_ctrl_req), GFP_KERNEL, node);
>> +	if (!vc_ctrl_req)
>> +		goto out;
> 
> do you need to allocate it with kzalloc?
> is anything wrong with just keeping it part of device?
> even if yes this change is better split in a separate patch, would make the patch smaller.
Because there are padding field in 
virtio_crypto_op_ctrl_req&virtio_crypto_session_input, I suppose the 
original version also needs to clear padding field.
So I use kzalloc to make sure that the padding field gets cleared.
If this is reasonable, to separate this patch is OK to me, or I append 
this reason into commit message and comments in code.

>> +
>> +void virtcrypto_ctrlq_callback(struct virtqueue *vq)
>> +{
>> +	struct virtio_crypto *vcrypto = vq->vdev->priv;
>> +	struct virtio_crypto_ctrl_request *vc_ctrl_req;
>> +	unsigned long flags;
>> +	unsigned int len;
>> +
>> +	spin_lock_irqsave(&vcrypto->ctrl_lock, flags);
>> +	do {
>> +		virtqueue_disable_cb(vq);
>> +		while ((vc_ctrl_req = virtqueue_get_buf(vq, &len)) != NULL) {
> 
> 
> you really need to break out of this loop if vq is broken,
> virtqueue_get_buf will keep returning NULL in this case.
> 
I'm a little confused here, if virtqueue_get_buf return NULL, this loop 
will break. Could you please give me more hints?
> 
>> +			spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags);
>> +			if (vc_ctrl_req->ctrl_cb)
>> +				vc_ctrl_req->ctrl_cb(vc_ctrl_req);
>> +			spin_lock_irqsave(&vcrypto->ctrl_lock, flags);
>> +		}
>> +		if (unlikely(virtqueue_is_broken(vq)))
>> +			break;
>> +	} while (!virtqueue_enable_cb(vq));
>> +	spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags);
> 
> speaking of which existing code does not handle vq broken case
> all that well but it looks like this patch makes it a bit worse.
> want to try fixing? basically report an error ...
> 
>if virtqueue is broken, I can print log.

>> diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c
>> index c6f482db0bc0..e668d4b1bc6a 100644
>> --- a/drivers/crypto/virtio/virtio_crypto_core.c
>> +++ b/drivers/crypto/virtio/virtio_crypto_core.c
>> @@ -73,7 +73,7 @@ static int virtcrypto_find_vqs(struct virtio_crypto *vi)
>>   		goto err_names;
>>   
>>   	/* Parameters for control virtqueue */
>> -	callbacks[total_vqs - 1] = NULL;
>> +	callbacks[total_vqs - 1] = virtcrypto_ctrlq_callback;
>>   	names[total_vqs - 1] = "controlq";
>>   
>>   	/* Allocate/initialize parameters for data virtqueues */
>> diff --git a/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c
>> index a618c46a52b8..b8999dab3e66 100644
>> --- a/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c
>> +++ b/drivers/crypto/virtio/virtio_crypto_skcipher_algs.c
>> +	err = 0;
>> +out:
>> +	kfree_sensitive(vc_ctrl_req);
> 
> it is interesting that you use kfree_sensitive here. why is that?
> is there in fact anything sensitive here? if yes this is a security
> improvement and might need its own patch, or at least documentation.
>

OK, kfree is good enough here, I'll fix this.


Thanks a lot!


-- 
zhenwei pi

Powered by blists - more mailing lists